Question 1 1. The ________________________ presents the movement in cash and bank balances over a period. 1 points Question 2 1. Which of the following departments is not a support center? marketing telecommunications guest transportation human resources 1 points Question 3 1. The distinction between operating and nonoperating income relates to: Continuity of income. Primary activities of the reporting entity. Consistency of income stream. Reliability of measurements. 1 points Question 4 1. Change statements include a: Retained earnings statement, balance sheet, and cash flow statement. Balance sheet, cash flow statement, and income statement. Cash flow statement, income statement, and retained earnings statement. Retained earnings statement, balance sheet, and income statement. 1 points Question 5 1. Pro forma earnings: Could be considered management’s view of permanent earnings. Are needed for the correction of errors. Are standardized under generally accepted accounting principles Are useful to compare two different firms’ performance. 1 points Question 6 1. The purpose of the statement of retained earnings is to show: the lifetime earnings retained by the corporation. the lifetime cash flow. the lifetime sales. all of the above. 1 points Question 7 1. The study of an individual financial statement item over several accounting periods is called: Ratio analysis. Vertical analysis. Horizontal analysis. Time and motion analysis. 1 points Question 8 1. Which of the following is not an example of an internal user of a company’s financial statements? member of the board of directors department head stockholder top-level manager 1 points Question 9 1. The accounting principle that requires revenue to be reported when earned is the: Matching principle Revenue recognition principle Time period principle Accrual reporting principle Going-concern principle 1 points Question 10 1. Which of the following questions can not be answered by analyzing information presented on a monthly income statement? How profitable was the hospitality operation at the end of the month? How much was spent last month to market the operation’s services? How much cash was on hand at the end of the month? What was the cost of sales for the month? 1 points Question 11 1. The sources of hotel revenue might be: profits and sales. sales, interest income, and dividend income. net income. all of the above. 1 points Question 12 1. Vertical analysis is a tool to evaluate individual financial statement items or groups of items in terms of a specific base amount. True False 1 points Question 13 1. The following is a portion of a comparative analysis: This Year Change Cost of Sales $400,000 (30,000) The cost of sales last year was: $370,000. $430,000. $30,000. $60,000. 1 points Question 14 1. Since everyone knows what an income statement is, there is no need to put a heading on this report. True False 1 points Question 15 1. An analytical procedure in which each income statement amount is stated as a percentage of a base amount, in this case, net sales. 1 points Question 16 1. Groups outside the business who require accounting and financial information. This includes suppliers, bankers, stockholders, and investors. 1 points Question 17 1. Interpretation of data shown on a common-size income statement can be simplified by: zeroing out the income statement bookkeeping accounts. classifying dividends as a business expense. restating the percentages as a component of the sales dollar. redesigning the statement. 1 points Question 18 1. The following information is provided: Dividends paid this year $ 30,000 Dividends declared this year 40,000 Net income this year 100,000 Retained earnings, start of year 150,000 The retained earnings at the end of this year are: $180,000. $220,000. $210,000. $260,000. 1 points Question 19 1. Horizontal analysis is also known as: Liquidity analysis. Absolute analysis. Revenue analysis. Trend analysis. 1 points Question 20 1. At the end of Year 1, the income statement for the Roadside Inn showed net income at $50,000. At the end of Year 2, the income statement showed $100,000 in net income. A horizontal analysis of the income statements would show the relative difference between the two years as: $50,000. $20,000. 100%. 50%. 1 points Question 21 1. Financial statement analysis is the application of analytical tools to general-purpose financial statements and related data for making business decisions. True False 1 points Question 22 1. Following is a portion of an income statement: 20X8 20X7 Sales $180,000 $190,000 In a comparative analysis, the percentage change from 20X7 to 20X8 is: A 105% decrease. A 94.7% Decrease A 5.6% Decrease A 5.3% Decrease 1 points Question 23 1. A fiscal year consists of any twelve consecutive months. True False 1 points Question 24 1. Financial statements intended for internal users. These statements present detailed information on each responsibility area ant the hotel as a whole. 1 points Question 25 1. Financial statements are usually prepared at the end of each fiscal period. True False

Question 1 1. The ________________________ presents the movement in cash and bank balances over a period. 1 points Question 2 1. Which of the following departments is not a support center? marketing telecommunications guest transportation human resources 1 points Question 3 1. The distinction between operating and nonoperating income relates to: Continuity of income. Primary activities of the reporting entity. Consistency of income stream. Reliability of measurements. 1 points Question 4 1. Change statements include a: Retained earnings statement, balance sheet, and cash flow statement. Balance sheet, cash flow statement, and income statement. Cash flow statement, income statement, and retained earnings statement. Retained earnings statement, balance sheet, and income statement. 1 points Question 5 1. Pro forma earnings: Could be considered management’s view of permanent earnings. Are needed for the correction of errors. Are standardized under generally accepted accounting principles Are useful to compare two different firms’ performance. 1 points Question 6 1. The purpose of the statement of retained earnings is to show: the lifetime earnings retained by the corporation. the lifetime cash flow. the lifetime sales. all of the above. 1 points Question 7 1. The study of an individual financial statement item over several accounting periods is called: Ratio analysis. Vertical analysis. Horizontal analysis. Time and motion analysis. 1 points Question 8 1. Which of the following is not an example of an internal user of a company’s financial statements? member of the board of directors department head stockholder top-level manager 1 points Question 9 1. The accounting principle that requires revenue to be reported when earned is the: Matching principle Revenue recognition principle Time period principle Accrual reporting principle Going-concern principle 1 points Question 10 1. Which of the following questions can not be answered by analyzing information presented on a monthly income statement? How profitable was the hospitality operation at the end of the month? How much was spent last month to market the operation’s services? How much cash was on hand at the end of the month? What was the cost of sales for the month? 1 points Question 11 1. The sources of hotel revenue might be: profits and sales. sales, interest income, and dividend income. net income. all of the above. 1 points Question 12 1. Vertical analysis is a tool to evaluate individual financial statement items or groups of items in terms of a specific base amount. True False 1 points Question 13 1. The following is a portion of a comparative analysis: This Year Change Cost of Sales $400,000 (30,000) The cost of sales last year was: $370,000. $430,000. $30,000. $60,000. 1 points Question 14 1. Since everyone knows what an income statement is, there is no need to put a heading on this report. True False 1 points Question 15 1. An analytical procedure in which each income statement amount is stated as a percentage of a base amount, in this case, net sales. 1 points Question 16 1. Groups outside the business who require accounting and financial information. This includes suppliers, bankers, stockholders, and investors. 1 points Question 17 1. Interpretation of data shown on a common-size income statement can be simplified by: zeroing out the income statement bookkeeping accounts. classifying dividends as a business expense. restating the percentages as a component of the sales dollar. redesigning the statement. 1 points Question 18 1. The following information is provided: Dividends paid this year $ 30,000 Dividends declared this year 40,000 Net income this year 100,000 Retained earnings, start of year 150,000 The retained earnings at the end of this year are: $180,000. $220,000. $210,000. $260,000. 1 points Question 19 1. Horizontal analysis is also known as: Liquidity analysis. Absolute analysis. Revenue analysis. Trend analysis. 1 points Question 20 1. At the end of Year 1, the income statement for the Roadside Inn showed net income at $50,000. At the end of Year 2, the income statement showed $100,000 in net income. A horizontal analysis of the income statements would show the relative difference between the two years as: $50,000. $20,000. 100%. 50%. 1 points Question 21 1. Financial statement analysis is the application of analytical tools to general-purpose financial statements and related data for making business decisions. True False 1 points Question 22 1. Following is a portion of an income statement: 20X8 20X7 Sales $180,000 $190,000 In a comparative analysis, the percentage change from 20X7 to 20X8 is: A 105% decrease. A 94.7% Decrease A 5.6% Decrease A 5.3% Decrease 1 points Question 23 1. A fiscal year consists of any twelve consecutive months. True False 1 points Question 24 1. Financial statements intended for internal users. These statements present detailed information on each responsibility area ant the hotel as a whole. 1 points Question 25 1. Financial statements are usually prepared at the end of each fiscal period. True False

info@checkyourstudy.com Whatsapp +919911743277
NAME: _____________________________________________ (print) INTRODUCTORY SURVEYING – MINING ENGINEERING 2400 Second Midterm Exam October 24, 2014 Work all four problems in the space provided. Solutions must be neat and logically presented for full credit. 1. (25 pts) Put an “X” over the letter corresponding to correct answers for the following multiple choice questions. A theodolite is used to estimate a distance using stadia. The stadia factor is 100, the stadia constant is zero, the zenith angle is 90°, the upper reading is 10.20, the rod reading is 7.75 and the lower reading is 5.30. The best estimate for horizontal distance is: (a) 1020 ft; (b) 490 ft; (c) 245 ft; (d) if none of the preceding – provide your answer . From B the azimuth to A is 233° 15′ 30″. The angle right to C is 215° 05′ 15″. The azimuth of C to B is: (a)88°20’45”; (b) 268°20’45”; (c) 250°10’30”; (d) if none of the preceding – provide your answer. A five-level station is described as C3.5/34.1 C4.8/25.0 C6.7/0.0 C9.2/25.0 C10.8/33.6. How wide is the road? (a) 50.0 ft, (b) 67.7 ft, (c) 25.0 ft, (e) if none of the preceding – provide your answer . An engineer used a total station to complete a closed traverse at a construction site. The sum of LAT and sum of DEP were determined to be 0.04 and 0.07 respectively. The total horizontal distance measured 2510.00 ft. What is the corresponding precision? (a) 1/63000; (b) 1/36000; (c) 1/31000; (d) if none of the preceding-provide your answer. The interior angles of a closed six sided traverse measure: 34° 28′ 20″ 185° 37′ 00″ 110° 59′ 20″ 195° 10′ 40″ 81° 40′ 20″ 112° 05′ 20″ In adjusting this traverse, the adjusted value for the first angle is: (a) 34° 28′ 20″; (b) 34° 28′ 10″; ( c) 34° 28′ 30″; (d) if none of the preceding – provide your answer . 2. (15 pts) Given the position of points A and B, determine the azimuth of A to B to the nearest second. Point A 5470.00N 4710.00E Point B 5130.00N 5350.00E 3. (25 pts) The volume of a fill between station 24+00 and 26+00 on a 50-foot wide road is to be determined by the prismoidal method. The three level sections are given by: Stn. 24+00 F10.0 F12.0 F8.0 52.0 0.0 65.0 Stn. 25+00 F8.0 F10.0 F10.0 55.0 0.0 52.0 Stn. 26+00 F12.0 F8.0 F15.0 61.0 0.0 55.0 Determine the volume to the nearest 100 cubic feet. (All fill dimensions are in feet.) (Hint: The area at Stn. 25 is 760 sq ft and the area at Stn. 26 is 801.5 sq ft.) 4. (35 points) The following information was obtained from an angle-right traverse conducted on the surface with a total station (conventional practice for HI and HS, i.e. HS is above the target of interest and, therefore, indicated as negative in the notes): BS IS FS Angle Rt. Zenith Angle SD HI HS A B C 261°12’20” 97° 25’20” 355.33 4.99 -0.33 261°11’40” 262° 34’20” The position of B is N5000.00, E5000.00, El 5000.00. The azimuth of A to B is 49°18’30”. Determine the coordinates and elevation of C. Show and identify all intermediate calculations.

NAME: _____________________________________________ (print) INTRODUCTORY SURVEYING – MINING ENGINEERING 2400 Second Midterm Exam October 24, 2014 Work all four problems in the space provided. Solutions must be neat and logically presented for full credit. 1. (25 pts) Put an “X” over the letter corresponding to correct answers for the following multiple choice questions. A theodolite is used to estimate a distance using stadia. The stadia factor is 100, the stadia constant is zero, the zenith angle is 90°, the upper reading is 10.20, the rod reading is 7.75 and the lower reading is 5.30. The best estimate for horizontal distance is: (a) 1020 ft; (b) 490 ft; (c) 245 ft; (d) if none of the preceding – provide your answer . From B the azimuth to A is 233° 15′ 30″. The angle right to C is 215° 05′ 15″. The azimuth of C to B is: (a)88°20’45”; (b) 268°20’45”; (c) 250°10’30”; (d) if none of the preceding – provide your answer. A five-level station is described as C3.5/34.1 C4.8/25.0 C6.7/0.0 C9.2/25.0 C10.8/33.6. How wide is the road? (a) 50.0 ft, (b) 67.7 ft, (c) 25.0 ft, (e) if none of the preceding – provide your answer . An engineer used a total station to complete a closed traverse at a construction site. The sum of LAT and sum of DEP were determined to be 0.04 and 0.07 respectively. The total horizontal distance measured 2510.00 ft. What is the corresponding precision? (a) 1/63000; (b) 1/36000; (c) 1/31000; (d) if none of the preceding-provide your answer. The interior angles of a closed six sided traverse measure: 34° 28′ 20″ 185° 37′ 00″ 110° 59′ 20″ 195° 10′ 40″ 81° 40′ 20″ 112° 05′ 20″ In adjusting this traverse, the adjusted value for the first angle is: (a) 34° 28′ 20″; (b) 34° 28′ 10″; ( c) 34° 28′ 30″; (d) if none of the preceding – provide your answer . 2. (15 pts) Given the position of points A and B, determine the azimuth of A to B to the nearest second. Point A 5470.00N 4710.00E Point B 5130.00N 5350.00E 3. (25 pts) The volume of a fill between station 24+00 and 26+00 on a 50-foot wide road is to be determined by the prismoidal method. The three level sections are given by: Stn. 24+00 F10.0 F12.0 F8.0 52.0 0.0 65.0 Stn. 25+00 F8.0 F10.0 F10.0 55.0 0.0 52.0 Stn. 26+00 F12.0 F8.0 F15.0 61.0 0.0 55.0 Determine the volume to the nearest 100 cubic feet. (All fill dimensions are in feet.) (Hint: The area at Stn. 25 is 760 sq ft and the area at Stn. 26 is 801.5 sq ft.) 4. (35 points) The following information was obtained from an angle-right traverse conducted on the surface with a total station (conventional practice for HI and HS, i.e. HS is above the target of interest and, therefore, indicated as negative in the notes): BS IS FS Angle Rt. Zenith Angle SD HI HS A B C 261°12’20” 97° 25’20” 355.33 4.99 -0.33 261°11’40” 262° 34’20” The position of B is N5000.00, E5000.00, El 5000.00. The azimuth of A to B is 49°18’30”. Determine the coordinates and elevation of C. Show and identify all intermediate calculations.

info@checkyourstudy.com Whatsapp +919911743277
Assignment 10 Due: 11:59pm on Friday, April 18, 2014 You will receive no credit for items you complete after the assignment is due. Grading Policy Conceptual Question 12.3 Part A The figure shows three rotating disks, all of equal mass. Rank in order, from largest to smallest, their rotational kinetic energies to . Rank from largest to smallest. To rank items as equivalent, overlap them. ANSWER: Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 1 of 21 4/11/2014 1:13 PM Incorrect; Try Again Conceptual Question 12.6 You have two steel solid spheres. Sphere 2 has twice the radius of sphere 1. Part A By what factor does the moment of inertia of sphere 2 exceed the moment of inertia of sphere 1? ANSWER: Correct Problem 12.2 A high-speed drill reaches 2500 in 0.59 . Part A What is the drill’s angular acceleration? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B Through how many revolutions does it turn during this first 0.59 ? Express your answer to two significant figures and include the appropriate units. ANSWER: Constant Angular Acceleration in the Kitchen = 32 = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 2 of 21 4/11/2014 1:13 PM Dario, a prep cook at an Italian restaurant, spins a salad spinner and observes that it rotates 20.0 times in 5.00 seconds and then stops spinning it. The salad spinner rotates 6.00 more times before it comes to rest. Assume that the spinner slows down with constant angular acceleration. Part A What is the angular acceleration of the salad spinner as it slows down? Express your answer numerically in degrees per second per second. You did not open hints for this part. ANSWER: Part B This question will be shown after you complete previous question(s). ± A Spinning Electric Fan An electric fan is turned off, and its angular velocity decreases uniformly from 540 to 250 in a time interval of length 4.40 . Part A Find the angular acceleration in revolutions per second per second. You did not open hints for this part. ANSWER: Part B Find the number of revolutions made by the fan blades during the time that they are slowing down in Part A. = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 3 of 21 4/11/2014 1:13 PM You did not open hints for this part. ANSWER: Part C How many more seconds are required for the fan to come to rest if the angular acceleration remains constant at the value calculated in Part A? You did not open hints for this part. ANSWER: Problem 12.8 A 100 ball and a 230 ball are connected by a 34- -long, massless, rigid rod. The balls rotate about their center of mass at 130 . Part A What is the speed of the 100 ball? Express your answer to two significant figures and include the appropriate units. ANSWER: Problem 12.10 A thin, 60.0 disk with a diameter of 9.00 rotates about an axis through its center with 0.200 of kinetic energy. Part A What is the speed of a point on the rim? = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 4 of 21 4/11/2014 1:13 PM Express your answer with the appropriate units. ANSWER: Problem 12.12 A drum major twirls a 95- -long, 470 baton about its center of mass at 150 . Part A What is the baton’s rotational kinetic energy? Express your answer to two significant figures and include the appropriate units. ANSWER: Net Torque on a Pulley The figure below shows two blocks suspended by a cord over a pulley. The mass of block B is twice the mass of block A, while the mass of the pulley is equal to the mass of block A. The blocks are let free to move and the cord moves on the pulley without slipping or stretching. There is no friction in the pulley axle, and the cord’s weight can be ignored. Part A Which of the following statements correctly describes the system shown in the figure? Check all that apply. = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 5 of 21 4/11/2014 1:13 PM You did not open hints for this part. ANSWER: Part B This question will be shown after you complete previous question(s). Problem 12.18 Part A In the figure , what is the magnitude of net torque about the axle? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B What is the direction of net torque about the axle? ANSWER: The acceleration of the blocks is zero. The net torque on the pulley is zero. The angular acceleration of the pulley is nonzero. = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 6 of 21 4/11/2014 1:13 PM Problem 12.22 An athlete at the gym holds a 3.5 steel ball in his hand. His arm is 78 long and has a mass of 3.6 . Assume the center of mass of the arm is at the geometrical center of the arm. Part A What is the magnitude of the torque about his shoulder if he holds his arm straight out to his side, parallel to the floor? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B What is the magnitude of the torque about his shoulder if he holds his arm straight, but below horizontal? Express your answer to two significant figures and include the appropriate units. ANSWER: Parallel Axis Theorem The parallel axis theorem relates , the moment of inertia of an object about an axis passing through its center of mass, to , the moment of inertia of the same object about a parallel axis passing through point p. The mathematical statement of the theorem is , where is the perpendicular distance from the center of mass to the axis that passes through point p, and is the mass of the object. Part A Suppose a uniform slender rod has length and mass . The moment of inertia of the rod about about an axis that is perpendicular to the rod and that passes through its center of mass is given by . Find , the moment of inertia of the rod with respect to a parallel axis through one end of the rod. Express in terms of and . Use fractions rather than decimal numbers in your answer. Clockwise Counterclockwise = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 7 of 21 4/11/2014 1:13 PM You did not open hints for this part. ANSWER: Part B Now consider a cube of mass with edges of length . The moment of inertia of the cube about an axis through its center of mass and perpendicular to one of its faces is given by . Find , the moment of inertia about an axis p through one of the edges of the cube Express in terms of and . Use fractions rather than decimal numbers in your answer. You did not open hints for this part. ANSWER: Problem 12.26 Starting from rest, a 12- -diameter compact disk takes 2.9 to reach its operating angular velocity of 2000 . Assume that the angular acceleration is constant. The disk’s moment of inertia is . Part A How much torque is applied to the disk? Express your answer to two significant figures and include the appropriate units. = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 8 of 21 4/11/2014 1:13 PM ANSWER: Part B How many revolutions does it make before reaching full speed? Express your answer using two significant figures. ANSWER: Problem 12.23 An object’s moment of inertia is 2.20 . Its angular velocity is increasing at the rate of 3.70 . Part A What is the total torque on the object? ANSWER: Problem 12.31 A 5.1 cat and a 2.5 bowl of tuna fish are at opposite ends of the 4.0- -long seesaw. = = rev Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 9 of 21 4/11/2014 1:13 PM Part A How far to the left of the pivot must a 3.8 cat stand to keep the seesaw balanced? Express your answer to two significant figures and include the appropriate units. ANSWER: Static Equilibrium of the Arm You are able to hold out your arm in an outstretched horizontal position because of the action of the deltoid muscle. Assume the humerus bone has a mass , length and its center of mass is a distance from the scapula. (For this problem ignore the rest of the arm.) The deltoid muscle attaches to the humerus a distance from the scapula. The deltoid muscle makes an angle of with the horizontal, as shown. Use throughout the problem. Part A Find the tension in the deltoid muscle. Express the tension in newtons, to the nearest integer. You did not open hints for this part. ANSWER: = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 10 of 21 4/11/2014 1:13 PM Part B Using the conditions for static equilibrium, find the magnitude of the vertical component of the force exerted by the scapula on the humerus (where the humerus attaches to the rest of the body). Express your answer in newtons, to the nearest integer. You did not open hints for this part. ANSWER: Part C Now find the magnitude of the horizontal component of the force exerted by the scapula on the humerus. Express your answer in newtons, to the nearest integer. ANSWER: ± Moments around a Rod A rod is bent into an L shape and attached at one point to a pivot. The rod sits on a frictionless table and the diagram is a view from above. This means that gravity can be ignored for this problem. There are three forces that are applied to the rod at different points and angles: , , and . Note that the dimensions of the bent rod are in centimeters in the figure, although the answers are requested in SI units (kilograms, meters, seconds). = N = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 11 of 21 4/11/2014 1:13 PM Part A If and , what does the magnitude of have to be for there to be rotational equilibrium? Answer numerically in newtons to two significant figures. You did not open hints for this part. ANSWER: Part B If the L-shaped rod has a moment of inertia , , , and again , how long a time would it take for the object to move through ( /4 radians)? Assume that as the object starts to move, each force moves with the object so as to retain its initial angle relative to the object. Express the time in seconds to two significant figures. You did not open hints for this part. ANSWER: Part C Now consider the situation in which and , but now a force with nonzero magnitude is acting on the rod. What does have to be to obtain equilibrium? Give a numerical answer, without trigonometric functions, in newtons, to two significant figures. You did not open hints for this part. ANSWER: = N = s = N Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 12 of 21 4/11/2014 1:13 PM Problem 12.32 A car tire is 55.0 in diameter. The car is traveling at a speed of 24.0 . Part A What is the tire’s rotation frequency, in rpm? Express your answer to three significant figures and include the appropriate units. ANSWER: Part B What is the speed of a point at the top edge of the tire? Express your answer to three significant figures and include the appropriate units. ANSWER: Part C What is the speed of a point at the bottom edge of the tire? Express your answer as an integer and include the appropriate units. ANSWER: Problem 12.33 A 460 , 8.00-cm-diameter solid cylinder rolls across the floor at 1.30 . Part A What is the can’s kinetic energy? Express your answer with the appropriate units. Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 13 of 21 4/11/2014 1:13 PM ANSWER: Problem 12.45 Part A What is the magnitude of the angular momentum of the 780 rotating bar in the figure ? ANSWER: Part B What is the direction of the angular momentum of the bar ? ANSWER: Problem 12.46 into the page out of the page Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 14 of 21 4/11/2014 1:13 PM Part A What is the magnitude of the angular momentum of the 2.20 , 4.60-cm-diameter rotating disk in the figure ? ANSWER: Part B What is its direction? ANSWER: Problem 12.60 A 3.0- -long ladder, as shown in the following figure, leans against a frictionless wall. The coefficient of static friction between the ladder and the floor is 0.46. x direction -x direction y direction -y direction z direction -z direction Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 15 of 21 4/11/2014 1:13 PM Part A What is the minimum angle the ladder can make with the floor without slipping? Express your answer to two significant figures and include the appropriate units. ANSWER: Problem 12.61 The 3.0- -long, 90 rigid beam in the following figure is supported at each end. An 70 student stands 2.0 from support 1. Part A How much upward force does the support 1 exert on the beam? Express your answer to two significant figures and include the appropriate units. ANSWER: = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 16 of 21 4/11/2014 1:13 PM Part B How much upward force does the support 2 exert on the beam? Express your answer to two significant figures and include the appropriate units. ANSWER: Enhanced EOC: Problem 12.63 A 44 , 5.5- -long beam is supported, but not attached to, the two posts in the figure . A 22 boy starts walking along the beam. You may want to review ( pages 330 – 334) . For help with math skills, you may want to review: The Vector Cross Product Part A How close can he get to the right end of the beam without it falling over? Express your answer to two significant figures and include the appropriate units. You did not open hints for this part. ANSWER: = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 17 of 21 4/11/2014 1:13 PM Problem 12.68 Flywheels are large, massive wheels used to store energy. They can be spun up slowly, then the wheel’s energy can be released quickly to accomplish a task that demands high power. An industrial flywheel has a 1.6 diameter and a mass of 270 . Its maximum angular velocity is 1500 . Part A A motor spins up the flywheel with a constant torque of 54 . How long does it take the flywheel to reach top speed? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B How much energy is stored in the flywheel? Express your answer to two significant figures and include the appropriate units. ANSWER: Part C The flywheel is disconnected from the motor and connected to a machine to which it will deliver energy. Half the energy stored in the flywheel is delivered in 2.2 . What is the average power delivered to the machine? Express your answer to two significant figures and include the appropriate units. ANSWER: = = = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 18 of 21 4/11/2014 1:13 PM Part D How much torque does the flywheel exert on the machine? Express your answer to two significant figures and include the appropriate units. ANSWER: Problem 12.71 The 3.30 , 40.0-cm-diameter disk in the figure is spinning at 350 . Part A How much friction force must the brake apply to the rim to bring the disk to a halt in 2.10 ? Express your answer with the appropriate units. ANSWER: Problem 12.74 A 5.0 , 60- -diameter cylinder rotates on an axle passing through one edge. The axle is parallel to the floor. The cylinder is held with the center of mass at the same height as the axle, then released. = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 19 of 21 4/11/2014 1:13 PM Part A What is the magnitude of the cylinder’s initial angular acceleration? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B What is the magnitude of the cylinder’s angular velocity when it is directly below the axle? Express your answer to two significant figures and include the appropriate units. ANSWER: Problem 12.82 A 45 figure skater is spinning on the toes of her skates at 0.90 . Her arms are outstretched as far as they will go. In this orientation, the skater can be modeled as a cylindrical torso (40 , 20 average diameter, 160 tall) plus two rod-like arms (2.5 each, 67 long) attached to the outside of the torso. The skater then raises her arms straight above her head, where she appears to be a 45 , 20- -diameter, 200- -tall cylinder. Part A What is her new rotation frequency, in revolutions per second? Express your answer to two significant figures and include the appropriate units. ANSWER: = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 20 of 21 4/11/2014 1:13 PM Score Summary: Your score on this assignment is 4.0%. You received 7.84 out of a possible total of 198 points. = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?disp

Assignment 10 Due: 11:59pm on Friday, April 18, 2014 You will receive no credit for items you complete after the assignment is due. Grading Policy Conceptual Question 12.3 Part A The figure shows three rotating disks, all of equal mass. Rank in order, from largest to smallest, their rotational kinetic energies to . Rank from largest to smallest. To rank items as equivalent, overlap them. ANSWER: Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 1 of 21 4/11/2014 1:13 PM Incorrect; Try Again Conceptual Question 12.6 You have two steel solid spheres. Sphere 2 has twice the radius of sphere 1. Part A By what factor does the moment of inertia of sphere 2 exceed the moment of inertia of sphere 1? ANSWER: Correct Problem 12.2 A high-speed drill reaches 2500 in 0.59 . Part A What is the drill’s angular acceleration? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B Through how many revolutions does it turn during this first 0.59 ? Express your answer to two significant figures and include the appropriate units. ANSWER: Constant Angular Acceleration in the Kitchen = 32 = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 2 of 21 4/11/2014 1:13 PM Dario, a prep cook at an Italian restaurant, spins a salad spinner and observes that it rotates 20.0 times in 5.00 seconds and then stops spinning it. The salad spinner rotates 6.00 more times before it comes to rest. Assume that the spinner slows down with constant angular acceleration. Part A What is the angular acceleration of the salad spinner as it slows down? Express your answer numerically in degrees per second per second. You did not open hints for this part. ANSWER: Part B This question will be shown after you complete previous question(s). ± A Spinning Electric Fan An electric fan is turned off, and its angular velocity decreases uniformly from 540 to 250 in a time interval of length 4.40 . Part A Find the angular acceleration in revolutions per second per second. You did not open hints for this part. ANSWER: Part B Find the number of revolutions made by the fan blades during the time that they are slowing down in Part A. = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 3 of 21 4/11/2014 1:13 PM You did not open hints for this part. ANSWER: Part C How many more seconds are required for the fan to come to rest if the angular acceleration remains constant at the value calculated in Part A? You did not open hints for this part. ANSWER: Problem 12.8 A 100 ball and a 230 ball are connected by a 34- -long, massless, rigid rod. The balls rotate about their center of mass at 130 . Part A What is the speed of the 100 ball? Express your answer to two significant figures and include the appropriate units. ANSWER: Problem 12.10 A thin, 60.0 disk with a diameter of 9.00 rotates about an axis through its center with 0.200 of kinetic energy. Part A What is the speed of a point on the rim? = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 4 of 21 4/11/2014 1:13 PM Express your answer with the appropriate units. ANSWER: Problem 12.12 A drum major twirls a 95- -long, 470 baton about its center of mass at 150 . Part A What is the baton’s rotational kinetic energy? Express your answer to two significant figures and include the appropriate units. ANSWER: Net Torque on a Pulley The figure below shows two blocks suspended by a cord over a pulley. The mass of block B is twice the mass of block A, while the mass of the pulley is equal to the mass of block A. The blocks are let free to move and the cord moves on the pulley without slipping or stretching. There is no friction in the pulley axle, and the cord’s weight can be ignored. Part A Which of the following statements correctly describes the system shown in the figure? Check all that apply. = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 5 of 21 4/11/2014 1:13 PM You did not open hints for this part. ANSWER: Part B This question will be shown after you complete previous question(s). Problem 12.18 Part A In the figure , what is the magnitude of net torque about the axle? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B What is the direction of net torque about the axle? ANSWER: The acceleration of the blocks is zero. The net torque on the pulley is zero. The angular acceleration of the pulley is nonzero. = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 6 of 21 4/11/2014 1:13 PM Problem 12.22 An athlete at the gym holds a 3.5 steel ball in his hand. His arm is 78 long and has a mass of 3.6 . Assume the center of mass of the arm is at the geometrical center of the arm. Part A What is the magnitude of the torque about his shoulder if he holds his arm straight out to his side, parallel to the floor? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B What is the magnitude of the torque about his shoulder if he holds his arm straight, but below horizontal? Express your answer to two significant figures and include the appropriate units. ANSWER: Parallel Axis Theorem The parallel axis theorem relates , the moment of inertia of an object about an axis passing through its center of mass, to , the moment of inertia of the same object about a parallel axis passing through point p. The mathematical statement of the theorem is , where is the perpendicular distance from the center of mass to the axis that passes through point p, and is the mass of the object. Part A Suppose a uniform slender rod has length and mass . The moment of inertia of the rod about about an axis that is perpendicular to the rod and that passes through its center of mass is given by . Find , the moment of inertia of the rod with respect to a parallel axis through one end of the rod. Express in terms of and . Use fractions rather than decimal numbers in your answer. Clockwise Counterclockwise = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 7 of 21 4/11/2014 1:13 PM You did not open hints for this part. ANSWER: Part B Now consider a cube of mass with edges of length . The moment of inertia of the cube about an axis through its center of mass and perpendicular to one of its faces is given by . Find , the moment of inertia about an axis p through one of the edges of the cube Express in terms of and . Use fractions rather than decimal numbers in your answer. You did not open hints for this part. ANSWER: Problem 12.26 Starting from rest, a 12- -diameter compact disk takes 2.9 to reach its operating angular velocity of 2000 . Assume that the angular acceleration is constant. The disk’s moment of inertia is . Part A How much torque is applied to the disk? Express your answer to two significant figures and include the appropriate units. = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 8 of 21 4/11/2014 1:13 PM ANSWER: Part B How many revolutions does it make before reaching full speed? Express your answer using two significant figures. ANSWER: Problem 12.23 An object’s moment of inertia is 2.20 . Its angular velocity is increasing at the rate of 3.70 . Part A What is the total torque on the object? ANSWER: Problem 12.31 A 5.1 cat and a 2.5 bowl of tuna fish are at opposite ends of the 4.0- -long seesaw. = = rev Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 9 of 21 4/11/2014 1:13 PM Part A How far to the left of the pivot must a 3.8 cat stand to keep the seesaw balanced? Express your answer to two significant figures and include the appropriate units. ANSWER: Static Equilibrium of the Arm You are able to hold out your arm in an outstretched horizontal position because of the action of the deltoid muscle. Assume the humerus bone has a mass , length and its center of mass is a distance from the scapula. (For this problem ignore the rest of the arm.) The deltoid muscle attaches to the humerus a distance from the scapula. The deltoid muscle makes an angle of with the horizontal, as shown. Use throughout the problem. Part A Find the tension in the deltoid muscle. Express the tension in newtons, to the nearest integer. You did not open hints for this part. ANSWER: = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 10 of 21 4/11/2014 1:13 PM Part B Using the conditions for static equilibrium, find the magnitude of the vertical component of the force exerted by the scapula on the humerus (where the humerus attaches to the rest of the body). Express your answer in newtons, to the nearest integer. You did not open hints for this part. ANSWER: Part C Now find the magnitude of the horizontal component of the force exerted by the scapula on the humerus. Express your answer in newtons, to the nearest integer. ANSWER: ± Moments around a Rod A rod is bent into an L shape and attached at one point to a pivot. The rod sits on a frictionless table and the diagram is a view from above. This means that gravity can be ignored for this problem. There are three forces that are applied to the rod at different points and angles: , , and . Note that the dimensions of the bent rod are in centimeters in the figure, although the answers are requested in SI units (kilograms, meters, seconds). = N = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 11 of 21 4/11/2014 1:13 PM Part A If and , what does the magnitude of have to be for there to be rotational equilibrium? Answer numerically in newtons to two significant figures. You did not open hints for this part. ANSWER: Part B If the L-shaped rod has a moment of inertia , , , and again , how long a time would it take for the object to move through ( /4 radians)? Assume that as the object starts to move, each force moves with the object so as to retain its initial angle relative to the object. Express the time in seconds to two significant figures. You did not open hints for this part. ANSWER: Part C Now consider the situation in which and , but now a force with nonzero magnitude is acting on the rod. What does have to be to obtain equilibrium? Give a numerical answer, without trigonometric functions, in newtons, to two significant figures. You did not open hints for this part. ANSWER: = N = s = N Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 12 of 21 4/11/2014 1:13 PM Problem 12.32 A car tire is 55.0 in diameter. The car is traveling at a speed of 24.0 . Part A What is the tire’s rotation frequency, in rpm? Express your answer to three significant figures and include the appropriate units. ANSWER: Part B What is the speed of a point at the top edge of the tire? Express your answer to three significant figures and include the appropriate units. ANSWER: Part C What is the speed of a point at the bottom edge of the tire? Express your answer as an integer and include the appropriate units. ANSWER: Problem 12.33 A 460 , 8.00-cm-diameter solid cylinder rolls across the floor at 1.30 . Part A What is the can’s kinetic energy? Express your answer with the appropriate units. Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 13 of 21 4/11/2014 1:13 PM ANSWER: Problem 12.45 Part A What is the magnitude of the angular momentum of the 780 rotating bar in the figure ? ANSWER: Part B What is the direction of the angular momentum of the bar ? ANSWER: Problem 12.46 into the page out of the page Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 14 of 21 4/11/2014 1:13 PM Part A What is the magnitude of the angular momentum of the 2.20 , 4.60-cm-diameter rotating disk in the figure ? ANSWER: Part B What is its direction? ANSWER: Problem 12.60 A 3.0- -long ladder, as shown in the following figure, leans against a frictionless wall. The coefficient of static friction between the ladder and the floor is 0.46. x direction -x direction y direction -y direction z direction -z direction Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 15 of 21 4/11/2014 1:13 PM Part A What is the minimum angle the ladder can make with the floor without slipping? Express your answer to two significant figures and include the appropriate units. ANSWER: Problem 12.61 The 3.0- -long, 90 rigid beam in the following figure is supported at each end. An 70 student stands 2.0 from support 1. Part A How much upward force does the support 1 exert on the beam? Express your answer to two significant figures and include the appropriate units. ANSWER: = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 16 of 21 4/11/2014 1:13 PM Part B How much upward force does the support 2 exert on the beam? Express your answer to two significant figures and include the appropriate units. ANSWER: Enhanced EOC: Problem 12.63 A 44 , 5.5- -long beam is supported, but not attached to, the two posts in the figure . A 22 boy starts walking along the beam. You may want to review ( pages 330 – 334) . For help with math skills, you may want to review: The Vector Cross Product Part A How close can he get to the right end of the beam without it falling over? Express your answer to two significant figures and include the appropriate units. You did not open hints for this part. ANSWER: = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 17 of 21 4/11/2014 1:13 PM Problem 12.68 Flywheels are large, massive wheels used to store energy. They can be spun up slowly, then the wheel’s energy can be released quickly to accomplish a task that demands high power. An industrial flywheel has a 1.6 diameter and a mass of 270 . Its maximum angular velocity is 1500 . Part A A motor spins up the flywheel with a constant torque of 54 . How long does it take the flywheel to reach top speed? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B How much energy is stored in the flywheel? Express your answer to two significant figures and include the appropriate units. ANSWER: Part C The flywheel is disconnected from the motor and connected to a machine to which it will deliver energy. Half the energy stored in the flywheel is delivered in 2.2 . What is the average power delivered to the machine? Express your answer to two significant figures and include the appropriate units. ANSWER: = = = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 18 of 21 4/11/2014 1:13 PM Part D How much torque does the flywheel exert on the machine? Express your answer to two significant figures and include the appropriate units. ANSWER: Problem 12.71 The 3.30 , 40.0-cm-diameter disk in the figure is spinning at 350 . Part A How much friction force must the brake apply to the rim to bring the disk to a halt in 2.10 ? Express your answer with the appropriate units. ANSWER: Problem 12.74 A 5.0 , 60- -diameter cylinder rotates on an axle passing through one edge. The axle is parallel to the floor. The cylinder is held with the center of mass at the same height as the axle, then released. = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 19 of 21 4/11/2014 1:13 PM Part A What is the magnitude of the cylinder’s initial angular acceleration? Express your answer to two significant figures and include the appropriate units. ANSWER: Part B What is the magnitude of the cylinder’s angular velocity when it is directly below the axle? Express your answer to two significant figures and include the appropriate units. ANSWER: Problem 12.82 A 45 figure skater is spinning on the toes of her skates at 0.90 . Her arms are outstretched as far as they will go. In this orientation, the skater can be modeled as a cylindrical torso (40 , 20 average diameter, 160 tall) plus two rod-like arms (2.5 each, 67 long) attached to the outside of the torso. The skater then raises her arms straight above her head, where she appears to be a 45 , 20- -diameter, 200- -tall cylinder. Part A What is her new rotation frequency, in revolutions per second? Express your answer to two significant figures and include the appropriate units. ANSWER: = = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?displayM… 20 of 21 4/11/2014 1:13 PM Score Summary: Your score on this assignment is 4.0%. You received 7.84 out of a possible total of 198 points. = Assignment 10 http://session.masteringphysics.com/myct/assignmentPrintView?disp

info@checkyourstudy.com
1. According to Ryan & Siebens (2012) __________ of adults 25 years old completed at least a high school degree and more than __________ of all adults had attained at least a bachelor’s degree. A.50.2%; 15.5%. B.70.3%; 18.4%. C.C) 85.3%; 27.9%. D.78.4%; 20.7%. 2. Which of the following was not identified as a manifest function of the social institution of education? A.personal development. B.educate. C.proper socialization. D.supervision. 3. Which of the following sociological perspectives is/are concerned that schools often indoctrinate students in the U.S. in Western bureaucratic ideology? A.Functionalism. B.Interactionism. C.Conflict. D.Conflict and Interactionism. 4. The sociological concept of “definition of the situation” was developed by: A.W.I. Thomas and Dorothy Swaine Thomas. B.W.I. Thomas. C.Rosabeth Moss Kanter. D.R. S. Smith. 5. According to the research of Myra and David Sadker (1994): A.boys receive less praise, corrections, and feedback than girls in school. B.girls receive less attention than boys in school. C.boys receive less attention than girls in school. D.girls and boys receive about the same amount of attention, praise, correction, and feedback in school. 6. The number of elderly Americans in the workforce has decreased over the last decade. True False 7. According to the author, the current call for educational reform was initiated during the __________ administration. A.Clinton. B.Reagan. C.Bush. D.Nixon. 8. The No Child Left Behind Act was passed during the __________ administration. A.Bush. B.Clinton. C.Reagan. D.Ford. 9. While the U.S. spends __________ on education than other high-income countries, our literacy scores are __________ in a world comparison. A.less; above average. B.less; average. C.more; average. D.more; below average. 10. According to the textbook, which of the following countries did not score higher than the U.S. on literacy scores? A.Sweden. B.Japan. C.Canada. D.Norway. 11. The U.S. Bureau of Statistics reported a __________ unemployment rate in December 2009. A.18. 2 million B.7.1 million C.12.7 million. D.18.4 million 12. Frances is working at a job that is below her skill level. Frances can be considered to be __________. A.unemployed. B.underemployed. C.not in the workforce. D.disemployed. 13. Persons who are __________ and __________ have high underemployment rates compared to those outside their groups. A.female; college educated. B.elderly; non-college educated. C.college educated; young. D.young; ethnic/racial minorities. 14. According to the 1993 report cited in your textbook, which of the following groups had the highest rates of labor force nonparticipation? A.blacks and Puerto Ricans. B.blacks and Native-Americans. C.Asians and blacks. D.Asians and Puerto Ricans. 15. Which of the following countries is expected to be the recipient of the largest number of outsourced jobs from the United States? A.Canada. B.India. C.China. D.Brazil. 16. Low-wage workers are characterized as: A.minority. B.female. C.disabled. D.both a and b are correct. 17. __________ defines job stress as the harmful emotional or physical responses that occurs when one’s job characteristics do not match with the capabilities, resources, or needs or the worker. A.Occupational Safety and Health Administration. B.Department of Commerce. C.National Institute for Occupational Safety and Health. D.Department of Health and Human Services. 18. Under Title VII of the Civil Rights Act of 1964, employment discrimination based on __________ is prohibited. A.religion and sexual orientation. B.sex. C.national origin and disability. D.both b and c are correct. 19. While laws were created to stop workplace discrimination on the basis of race, religion, sex, and national origin in 1964, the

1. According to Ryan & Siebens (2012) __________ of adults 25 years old completed at least a high school degree and more than __________ of all adults had attained at least a bachelor’s degree. A.50.2%; 15.5%. B.70.3%; 18.4%. C.C) 85.3%; 27.9%. D.78.4%; 20.7%. 2. Which of the following was not identified as a manifest function of the social institution of education? A.personal development. B.educate. C.proper socialization. D.supervision. 3. Which of the following sociological perspectives is/are concerned that schools often indoctrinate students in the U.S. in Western bureaucratic ideology? A.Functionalism. B.Interactionism. C.Conflict. D.Conflict and Interactionism. 4. The sociological concept of “definition of the situation” was developed by: A.W.I. Thomas and Dorothy Swaine Thomas. B.W.I. Thomas. C.Rosabeth Moss Kanter. D.R. S. Smith. 5. According to the research of Myra and David Sadker (1994): A.boys receive less praise, corrections, and feedback than girls in school. B.girls receive less attention than boys in school. C.boys receive less attention than girls in school. D.girls and boys receive about the same amount of attention, praise, correction, and feedback in school. 6. The number of elderly Americans in the workforce has decreased over the last decade. True False 7. According to the author, the current call for educational reform was initiated during the __________ administration. A.Clinton. B.Reagan. C.Bush. D.Nixon. 8. The No Child Left Behind Act was passed during the __________ administration. A.Bush. B.Clinton. C.Reagan. D.Ford. 9. While the U.S. spends __________ on education than other high-income countries, our literacy scores are __________ in a world comparison. A.less; above average. B.less; average. C.more; average. D.more; below average. 10. According to the textbook, which of the following countries did not score higher than the U.S. on literacy scores? A.Sweden. B.Japan. C.Canada. D.Norway. 11. The U.S. Bureau of Statistics reported a __________ unemployment rate in December 2009. A.18. 2 million B.7.1 million C.12.7 million. D.18.4 million 12. Frances is working at a job that is below her skill level. Frances can be considered to be __________. A.unemployed. B.underemployed. C.not in the workforce. D.disemployed. 13. Persons who are __________ and __________ have high underemployment rates compared to those outside their groups. A.female; college educated. B.elderly; non-college educated. C.college educated; young. D.young; ethnic/racial minorities. 14. According to the 1993 report cited in your textbook, which of the following groups had the highest rates of labor force nonparticipation? A.blacks and Puerto Ricans. B.blacks and Native-Americans. C.Asians and blacks. D.Asians and Puerto Ricans. 15. Which of the following countries is expected to be the recipient of the largest number of outsourced jobs from the United States? A.Canada. B.India. C.China. D.Brazil. 16. Low-wage workers are characterized as: A.minority. B.female. C.disabled. D.both a and b are correct. 17. __________ defines job stress as the harmful emotional or physical responses that occurs when one’s job characteristics do not match with the capabilities, resources, or needs or the worker. A.Occupational Safety and Health Administration. B.Department of Commerce. C.National Institute for Occupational Safety and Health. D.Department of Health and Human Services. 18. Under Title VII of the Civil Rights Act of 1964, employment discrimination based on __________ is prohibited. A.religion and sexual orientation. B.sex. C.national origin and disability. D.both b and c are correct. 19. While laws were created to stop workplace discrimination on the basis of race, religion, sex, and national origin in 1964, the

info@checkyourstudy.com
MAE 318: System Dynamics and Control Dr. Panagiotis K. Artemiadis MAE 318: System Dynamics and Control Homework 4 Problem 1: (Points: 25) The circuit shown in Fig. 1 is excited by an impulse of 0.015V. Assuming the capacitor is initially discharged, obtain an analytic expression of vO (t), and make a Matlab program that plots the system response to the impulse. Figure 1 Problem 2: Extra Credit (Points: 25) A winding oscillator consists of two steel spheres on each end of a long slender rod, as shown in Fig. 2. The rod is hung on a thin wire that can be twisted many revolutions without breaking. The device will be wound up 4000 degrees. Make a Matlab script that computes the system response and determine how long will it take until the motion decays to a swing of only 10 degrees? Assume that the thin wire has a rotational spring constant of 2  10?4Nm/rad and that the viscous friction coecient for the sphere in air is 2  10?4Nms/rad. Each sphere has a mass of 1Kg. Figure 2: Winding oscillator. Problem 3: (Points: 25) Find the equivalent transfer function T (s) = C(s) R(s) for the system shown in Fig. 3. Arizona State University. Fall 2015. Class # 73024. MAE 318. Homework 4: Page 1 of 4 MAE 318: System Dynamics and Control Dr. Panagiotis K. Artemiadis Figure 3 Problem 4: (Points: 25) Reduce the block diagram shown in Fig. 4 to a single transfer function T (s) = C(s) R(s) . Figure 4 Problem 5: (Points: 25) Consider the rotational mechanical system shown in Fig. 5. Represent the system as a block diagram. Arizona State University. Fall 2015. Class # 73024. MAE 318. Homework 4: Page 2 of 4 MAE 318: System Dynamics and Control Dr. Panagiotis K. Artemiadis Figure 5 Problem 6: (Points: 25) During ascent the space shuttle is steered by commands generated by the computer’s guidance calcu- lations. These commands are in the form of vehicle attitude, attitude rates, and attitude accelerations obtained through measurements made by the vehicle’s inertial measuring unit, rate gyro assembly, and accelerometer assembly, respectively. The ascent digital autopilot uses the errors between the actual and commanded attitude, rates, and accelerations to gimbal the space shuttle main engines (called thrust vectoring) and the solid rocket boosters to a ect the desired vehicle attitude. The space shut- tle’s attitude control system employs the same method in the pitch, roll, and yaw control systems. A simpli ed model of the pitch control system is shown in Fig. 6.  a) Find the closed-loop transfer function relating the actual pitch to commanded pitch. Assume all other inputs are zero.  b) Find the closed-loop transfer function relating the actual pitch rate to commanded pitch rate. Assume all other inputs are zero.  c) Find the closed-loop transfer function relating the actual pitch acceleration to commanded pitch acceleration. Assume all other inputs are zero. Figure 6: Space shuttle pitch control system (simpli ed). Arizona State University. Fall 2015. Class # 73024. MAE 318. Homework 4: Page 3 of 4 MAE 318: System Dynamics and Control Dr. Panagiotis K. Artemiadis Problem 7: (Extra Credit Points: 25) Extenders are robot manipulators that extend (i.e. increase) the strength of the human arm in load- maneuvering tasks (see Fig. 7). The system is represented by the transfer function Y (s) U(s) = G(s) = 30 s2+4s+3 where U (s) is the force of the human hand applied to the robot manipulator, and Y (s) is the force of the robot manipulator applied to the load. Assuming that the force of the human hand that is applied is given by u (t) = 5 sin (!t), create a MATLAB code that will compute and plot the di erence in magnitude and phase between the applied human force and the force of the robot manipulator applied to the load, as a function of the frequency !. Use 100 values for ! in the range ! 2 [0:01; 100] rad s for your two plots. See Fig. 8 on how to de ne di erence in magnitude and phase between two signals. You need to include your code and the two resulted plots in your solution. Figure 7: Human extender. A B dt T: signal period magnitude difference phase difference B A Figure 8: Magnitude and phase di erence (deg) between two sinusoidal signals.

MAE 318: System Dynamics and Control Dr. Panagiotis K. Artemiadis MAE 318: System Dynamics and Control Homework 4 Problem 1: (Points: 25) The circuit shown in Fig. 1 is excited by an impulse of 0.015V. Assuming the capacitor is initially discharged, obtain an analytic expression of vO (t), and make a Matlab program that plots the system response to the impulse. Figure 1 Problem 2: Extra Credit (Points: 25) A winding oscillator consists of two steel spheres on each end of a long slender rod, as shown in Fig. 2. The rod is hung on a thin wire that can be twisted many revolutions without breaking. The device will be wound up 4000 degrees. Make a Matlab script that computes the system response and determine how long will it take until the motion decays to a swing of only 10 degrees? Assume that the thin wire has a rotational spring constant of 2  10?4Nm/rad and that the viscous friction coecient for the sphere in air is 2  10?4Nms/rad. Each sphere has a mass of 1Kg. Figure 2: Winding oscillator. Problem 3: (Points: 25) Find the equivalent transfer function T (s) = C(s) R(s) for the system shown in Fig. 3. Arizona State University. Fall 2015. Class # 73024. MAE 318. Homework 4: Page 1 of 4 MAE 318: System Dynamics and Control Dr. Panagiotis K. Artemiadis Figure 3 Problem 4: (Points: 25) Reduce the block diagram shown in Fig. 4 to a single transfer function T (s) = C(s) R(s) . Figure 4 Problem 5: (Points: 25) Consider the rotational mechanical system shown in Fig. 5. Represent the system as a block diagram. Arizona State University. Fall 2015. Class # 73024. MAE 318. Homework 4: Page 2 of 4 MAE 318: System Dynamics and Control Dr. Panagiotis K. Artemiadis Figure 5 Problem 6: (Points: 25) During ascent the space shuttle is steered by commands generated by the computer’s guidance calcu- lations. These commands are in the form of vehicle attitude, attitude rates, and attitude accelerations obtained through measurements made by the vehicle’s inertial measuring unit, rate gyro assembly, and accelerometer assembly, respectively. The ascent digital autopilot uses the errors between the actual and commanded attitude, rates, and accelerations to gimbal the space shuttle main engines (called thrust vectoring) and the solid rocket boosters to a ect the desired vehicle attitude. The space shut- tle’s attitude control system employs the same method in the pitch, roll, and yaw control systems. A simpli ed model of the pitch control system is shown in Fig. 6.  a) Find the closed-loop transfer function relating the actual pitch to commanded pitch. Assume all other inputs are zero.  b) Find the closed-loop transfer function relating the actual pitch rate to commanded pitch rate. Assume all other inputs are zero.  c) Find the closed-loop transfer function relating the actual pitch acceleration to commanded pitch acceleration. Assume all other inputs are zero. Figure 6: Space shuttle pitch control system (simpli ed). Arizona State University. Fall 2015. Class # 73024. MAE 318. Homework 4: Page 3 of 4 MAE 318: System Dynamics and Control Dr. Panagiotis K. Artemiadis Problem 7: (Extra Credit Points: 25) Extenders are robot manipulators that extend (i.e. increase) the strength of the human arm in load- maneuvering tasks (see Fig. 7). The system is represented by the transfer function Y (s) U(s) = G(s) = 30 s2+4s+3 where U (s) is the force of the human hand applied to the robot manipulator, and Y (s) is the force of the robot manipulator applied to the load. Assuming that the force of the human hand that is applied is given by u (t) = 5 sin (!t), create a MATLAB code that will compute and plot the di erence in magnitude and phase between the applied human force and the force of the robot manipulator applied to the load, as a function of the frequency !. Use 100 values for ! in the range ! 2 [0:01; 100] rad s for your two plots. See Fig. 8 on how to de ne di erence in magnitude and phase between two signals. You need to include your code and the two resulted plots in your solution. Figure 7: Human extender. A B dt T: signal period magnitude difference phase difference B A Figure 8: Magnitude and phase di erence (deg) between two sinusoidal signals.

info@checkyourstudy.com
Biomedical Signal and Image Processing (4800_420_001) Assigned on September 12th, 2017 Assignment 4 – Noise and Correlation 1. If a signal is measured as 2.5 V and the noise is 28 mV (28 × 10−3 V), what is the SNR in dB? 2. A single sinusoidal signal is found with some noise. If the RMS value of the noise is 0.5 V and the SNR is 10 dB, what is the RMS amplitude of the sinusoid? 3. The file signal_noise.mat contains a variable x that consists of a 1.0-V peak sinusoidal signal buried in noise. What is the SNR for this signal and noise? Assume that the noise RMS is much greater than the signal RMS. Note: “signal_noise.mat” and other files used in these assignments can be downloaded from the content area of Brightspace, within the “Data Files for Exercises” folder. These files can be opened in Matlab by copying into the active folder and double-clicking on the file or using the Matlab load command using the format: load(‘signal_noise.mat’). To discover the variables within the files use the Matlab who command. 4. An 8-bit ADC converter that has an input range of ±5 V is used to convert a signal that ranges between ±2 V. What is the SNR of the input if the input noise equals the quantization noise of the converter? Hint: Refer to Equation below to find the quantization noise: 5. The file filter1.mat contains the spectrum of a fourth-order lowpass filter as variable x in dB. The file also contains the corresponding frequencies of x in variable freq. Plot the spectrum of this filter both as dB versus log frequency and as linear amplitude versus linear frequency. The frequency axis should range between 10 and 400 Hz in both plots. Hint: Use Equation below to convert: Biomedical Signal and Image Processing (4800_420_001) Assigned on September 12th, 2017 6. Generate one cycle of the square wave similar to the one shown below in a 500-point MATLAB array. Determine the RMS value of this waveform. [Hint: When you take the square of the data array, be sure to use a period before the up arrow so that MATLAB does the squaring point-by-point (i.e., x.^2).]. 7. A resistor produces 10 μV noise (i.e., 10 × 10−6 V noise) when the room temperature is 310 K and the bandwidth is 1 kHz (i.e., 1000 Hz). What current noise would be produced by this resistor? 8. A 3-ma current flows through both a diode (i.e., a semiconductor) and a 20,000-Ω (i.e., 20-kΩ) resistor. What is the net current noise, in? Assume a bandwidth of 1 kHz (i.e., 1 × 103 Hz). Which of the two components is responsible for producing the most noise? 9. Determine if the two signals, x and y, in file correl1.mat are correlated by checking the angle between them. 10. Modify the approach used in Practice Problem 3 to find the angle between short signals: Do not attempt to plot these vectors as it would require a 6-dimensional plot!

Biomedical Signal and Image Processing (4800_420_001) Assigned on September 12th, 2017 Assignment 4 – Noise and Correlation 1. If a signal is measured as 2.5 V and the noise is 28 mV (28 × 10−3 V), what is the SNR in dB? 2. A single sinusoidal signal is found with some noise. If the RMS value of the noise is 0.5 V and the SNR is 10 dB, what is the RMS amplitude of the sinusoid? 3. The file signal_noise.mat contains a variable x that consists of a 1.0-V peak sinusoidal signal buried in noise. What is the SNR for this signal and noise? Assume that the noise RMS is much greater than the signal RMS. Note: “signal_noise.mat” and other files used in these assignments can be downloaded from the content area of Brightspace, within the “Data Files for Exercises” folder. These files can be opened in Matlab by copying into the active folder and double-clicking on the file or using the Matlab load command using the format: load(‘signal_noise.mat’). To discover the variables within the files use the Matlab who command. 4. An 8-bit ADC converter that has an input range of ±5 V is used to convert a signal that ranges between ±2 V. What is the SNR of the input if the input noise equals the quantization noise of the converter? Hint: Refer to Equation below to find the quantization noise: 5. The file filter1.mat contains the spectrum of a fourth-order lowpass filter as variable x in dB. The file also contains the corresponding frequencies of x in variable freq. Plot the spectrum of this filter both as dB versus log frequency and as linear amplitude versus linear frequency. The frequency axis should range between 10 and 400 Hz in both plots. Hint: Use Equation below to convert: Biomedical Signal and Image Processing (4800_420_001) Assigned on September 12th, 2017 6. Generate one cycle of the square wave similar to the one shown below in a 500-point MATLAB array. Determine the RMS value of this waveform. [Hint: When you take the square of the data array, be sure to use a period before the up arrow so that MATLAB does the squaring point-by-point (i.e., x.^2).]. 7. A resistor produces 10 μV noise (i.e., 10 × 10−6 V noise) when the room temperature is 310 K and the bandwidth is 1 kHz (i.e., 1000 Hz). What current noise would be produced by this resistor? 8. A 3-ma current flows through both a diode (i.e., a semiconductor) and a 20,000-Ω (i.e., 20-kΩ) resistor. What is the net current noise, in? Assume a bandwidth of 1 kHz (i.e., 1 × 103 Hz). Which of the two components is responsible for producing the most noise? 9. Determine if the two signals, x and y, in file correl1.mat are correlated by checking the angle between them. 10. Modify the approach used in Practice Problem 3 to find the angle between short signals: Do not attempt to plot these vectors as it would require a 6-dimensional plot!

Whatsapp +919911743277  
According to a recent study of blogs, the expression of happiness seems to peak in the life span between the ages of ________. 14 and 18 50 and 60 18 and 25 70 and 80

According to a recent study of blogs, the expression of happiness seems to peak in the life span between the ages of ________. 14 and 18 50 and 60 18 and 25 70 and 80

According to a recent study of blogs, the expression of … Read More...
Ch 2 Questions that might be on the test. If you cannot answer them, check your class notes or the textbook. 1. A mineral is a naturally occurring substance formed through geological processes that has: a) a characteristic chemical composition, b) a highly ordered atomic structure c) specific physical properties d) all of the above 2. There are currently more than ______ known minerals, according to the International Mineralogical Association, a) 40 b) 400 c) 4000 d) 40 000 3. Some minerals, like quartz, mica or feldspar are: a) rare b) common c) valuable d) priceless 4. Rocks from which minerals are mined for economic purposes are referred to as: a) gangue b) tailings c) ores d) granite 5. Electrons, which have a _____ charge, a size which is so small as to be currently unmeasurable, and which are the least massive of the three types of basic particles. a) positive b) negative c) neutral 6. Both protons and neutrons are themselves now thought to be composed of even more elementary particles called: a) quarks b) quakes c) parsons d) megans 7. In processes which change the number of protons in a nucleus, the atom becomes an atom of a different chemical: a) isotope b) compound c) element d) planet 8. Atoms which have either a deficit or a surplus of electrons are called: a) elements b) isotopes c) ions d) molecules 9. In the Bohr model of the atom, electrons can only orbit the nucleus in particular circular orbits with fixed angular momentum and energy, their distances from the nucleus being proportional to their respective energies. They can only make _____ leaps between the fixed energy levels. a) tiny b) quantum c) gradual 10. It is impossible to simultaneously derive precise values for both the position and momentum of a particle for any given point in time; this became known as the ______ principle. a) Bohr b) Einstein c) uncertainty d) quantum 11. The modern model of the atom describes the positions of electrons in an atom in terms of: a) quantum levels b) orbital paths c) probabilities d) GPS 12. Isotopes of an element have nuclei with the same number of protons (the same atomic number) but different numbers of: a) electrons b) neutrons c) ions d) photons 13. In helium-3 (or 3He), how many protons are present? a) 1 b) 2 c) 3 d) 4 14. In helium-3 (or 3He), how many neutrons are present? a) 1 b) 2 c) 3 d) 4 15. The relative abundance of an isotope is strongly correlated with its tendency toward nuclear _____, short-lived nuclides quickly go away, while their long-lived counterparts endure. a) fission b) fusion c) decay d) bombardment 16. The isotopic composition of elements is different on different planets. a) True b) False 17. As a general rule, the fewer electrons in an atom’s valence shell, the ____ reactive it is. Lithium, sodium, and potassium have one electron in their outer shells. a) more b) less 18. Every atom is much more stable, or less reactive, with a ____ valence shell. a) partly full b) completely full 19. A positively-charged ion, which has fewer electrons than protons, is known as a: a) anion b) cation c) fermion d) bation 20. Bonds vary widely in their strength. Generally covalent and ionic bonds are often described as “strong”, whereas ______ bonds are generally considered to be “weak”. a) van der Waals b) Faradays c) van Neumans 21. This bonding involves sharing of electrons in which the positively charged nuclei of two or more atoms simultaneously attract the negatively charged electrons that are being shared a) ionic b) covalent c) van der Waals d) metallic 22. This bond results from electrostatic attraction between atoms: a) ionic b) covalent c) van der Waals d) metallic 23. A sea of delocalized electrons causes this bonding: a) ionic b) covalent c) van der Waals d) metallic 24. The chemical composition of minerals may vary between end members of a mineral system. For example the ______ feldspars comprise a continuous series from sodiumrich albite to calcium-rich anorthite. a) plagioclase b) orthoclase c) alkaline d) acidic 25. Crystal structure is based on ____ internal atomic arrangement. a) irregular b) regular c) random d) curvilinear 26. Pyrite and marcasite are both _______, but their arrangement of atoms differs. a) iron sulfide b) lead sulfide c) copper silfide d) silver sulfide 27. The carbon atoms in ______ are arranged into sheets which can slide easily past each other, while the carbon atoms in diamond form a strong, interlocking three-dimensional network. a) sapphire b) graphite c) aluminum d) carbonate 28. TGCFAOQTCD a) Crystal habit b) Hardness scale c) Luster scale 29. Dull to metallic, submetallic, adamantine, vitreous, pearly, resinous, or silky. a) Crystal habit b) Hardness scale c) Luster scale d) Heft scale 30. The color of the powder a mineral leaves after rubbing it on unglazed porcelain. a) color b) streak c) lustre d) iridescense 31. Describes the way a mineral may split apart along various planes. a) fracture b) streak c) lustre d) cleavage 32. In modern physics, the position of electrons about a nucleus are defined in terms of: a) probabilities b) circles c) ellipses d) chromodomes 33. The symbol H+ suggests a: a) hydrogen atom b) hydrogen isotope c) hydrogen cation d) hydrogen anion 34. The tabulated atomic mass of natural carbon is not exactly 12 because carbon in nature always has multiple ________ present. a) electrons b) isotopes c) quarks d) protons 35. This type of bonding due to delocalized electrons leads to malleability, ductility, and high melting points: a) covalent b) ionic c) van der Waals d) metallic 36. The mineral ___________ is 3 on Mohs Scale whereas the mineral ___________ is 9. a) calcite, corundum b) corundum, calcite c) caliche, calcite d) chalcedony, quartz 37. In hand specimens, geologists identify most minerals based on: a) physical properties b) chemical analyses c) xray diffraction 38. This type of chemical bonding is the weakest but occurs in all substances. a) covalent b) ionic c) metallic d) none of the above 39. Quartz, feldspar, mica, chlorite, kaolin, calcite, epidote, olivine, augite, hornblende, magnetite, hematite, limonite: these minerals are: a) common in rocks b) occasionally found c) rare d) extremely rare 40. Characteristics of a mineral do NOT include: a) naturally occurring b) characteristic chemical formula c) crystalline d) organic e) all of the above 41. The chemical composition of a particular mineral may vary between end members. For example, the common mineral plagioclase feldspar varies from being _______-rich to being _________-rich. a) sodium, calcium b) potassium, sodium c) iron, magnesium d) carbon, oxygen 42. Sharing of electrons typifies the __________ bond whereas electrostatic attraction typifies the _______ bond. a) ionic, covalent b) ionic, triclinic c) covalent, ionic d) triclinic, covalent 43. If number of protons does not equal the number of electrons, the atom is a(n) : a) isotope b) ion c) quark d) simplex e) google 44. Atoms generally consist of: a) electrons b) protons c) neutrons d) all of the above 45. Not counting rare minerals, about how many mineral species are at least occasionally encountered in rocks? a) 20 b) 200 c) 2000 46. Carbon is atomic number 6. Carbon-13 has _______ protons and _______ neutrons. a) thirteen, six b) six, seven c) twelve, twenty-five d) twelve, twelve 47. Which of these particles are not nucleons? a) electrons b) neutrons c) protons 48. A mineral with visibly recognizable crystals is said to have good crystal habit; otherwise the mineral is said to be: a) massive b) granular c) compact d) any of the above 49. In chemical bonding, two atoms become linked by moving or sharing __________. a) neutrons b) protons c) electrons 50. The name of an element is determined by the number of ______ present in the ______ of an atom. a) electrons, nucleus b) neutrons, nucleus c) protons, nucleus d) protons, electron cloud e) neutrons, electron cloud 51. Generally ________ and ____________ bonds are strong whereas the ______________ bond is weak. a) covalent, ionic, van der Waals b) van der Waals, covalent, ionic c) ionic, van der Waals, covalent 52. Which of the following are held together by chemical bonds? a) molecules b) crystals c) diatomic gases 53. An ion with fewer electrons than protons is called an ______ and it carries a _________ electric charge. a) cation, positive b) anion, negative c) cation, negative d) anion, positive 54. Two or more minerals may have the same _________ composition but different _______ structure. These are called polymorphs. a) crystal, chemical b) chemical, crystal 55. Industrial minerals are: a) gem quality b) commercially valuable c) tailings d) worthless 56. All minerals are crystalline. If the crystals are too small to see, they can be detected by: a) x-ray diffraction b) cosmic rays c) sound waves d) odor 57. If two atomes have the same number of protons but different numbers of neutrons, the atoms are _______ of the same _________. a) elements, mineral b) atoms, isotope c) elements, isotope d) isotopes, element 58. Modern physics recognizes that electrons show both particle and ______ behavior. a) wave b) emotional c) thermal d) revolting 59. Sodium and potassium have one ______ electron in their outer shells and are extremely ________. a) valence, stable b) inverted, reactive c) valence, reactive d) contaminated, inactive 60. The luster of _______ would be described as ________. a) glass, vitreous b) diamond, dull c) pyrite, silky d) graphite, resinous 61. The minerals ________ and __________ are polymorphs of carbon. a) diamond, graphite b) calcite, silicate c) bonite, bronzite 62. In the ______ atom based on _______ physics, electrons were restricted to circular orbits of fixed energy levels. a) Bohr , quantum b) Rutherford, classical c) Bohr, classical d) Rutherford, quantum 63. Virtually all elements other than ______ and _______ were formed in stars and supernovae long after the Big Bang. a) hydrogen, helium b) carbon, phosphorus c) carbon, oxygen d) silica, carbon 64. Physicist Werner _________ developed the ___________ principle which means that it is impossible to know exactly the position and momentum of a particle. a) Heisenberg, certainty b) Heisenberg, uncertainty c) Bohr, uncertainty d) Bohr, certainty

Ch 2 Questions that might be on the test. If you cannot answer them, check your class notes or the textbook. 1. A mineral is a naturally occurring substance formed through geological processes that has: a) a characteristic chemical composition, b) a highly ordered atomic structure c) specific physical properties d) all of the above 2. There are currently more than ______ known minerals, according to the International Mineralogical Association, a) 40 b) 400 c) 4000 d) 40 000 3. Some minerals, like quartz, mica or feldspar are: a) rare b) common c) valuable d) priceless 4. Rocks from which minerals are mined for economic purposes are referred to as: a) gangue b) tailings c) ores d) granite 5. Electrons, which have a _____ charge, a size which is so small as to be currently unmeasurable, and which are the least massive of the three types of basic particles. a) positive b) negative c) neutral 6. Both protons and neutrons are themselves now thought to be composed of even more elementary particles called: a) quarks b) quakes c) parsons d) megans 7. In processes which change the number of protons in a nucleus, the atom becomes an atom of a different chemical: a) isotope b) compound c) element d) planet 8. Atoms which have either a deficit or a surplus of electrons are called: a) elements b) isotopes c) ions d) molecules 9. In the Bohr model of the atom, electrons can only orbit the nucleus in particular circular orbits with fixed angular momentum and energy, their distances from the nucleus being proportional to their respective energies. They can only make _____ leaps between the fixed energy levels. a) tiny b) quantum c) gradual 10. It is impossible to simultaneously derive precise values for both the position and momentum of a particle for any given point in time; this became known as the ______ principle. a) Bohr b) Einstein c) uncertainty d) quantum 11. The modern model of the atom describes the positions of electrons in an atom in terms of: a) quantum levels b) orbital paths c) probabilities d) GPS 12. Isotopes of an element have nuclei with the same number of protons (the same atomic number) but different numbers of: a) electrons b) neutrons c) ions d) photons 13. In helium-3 (or 3He), how many protons are present? a) 1 b) 2 c) 3 d) 4 14. In helium-3 (or 3He), how many neutrons are present? a) 1 b) 2 c) 3 d) 4 15. The relative abundance of an isotope is strongly correlated with its tendency toward nuclear _____, short-lived nuclides quickly go away, while their long-lived counterparts endure. a) fission b) fusion c) decay d) bombardment 16. The isotopic composition of elements is different on different planets. a) True b) False 17. As a general rule, the fewer electrons in an atom’s valence shell, the ____ reactive it is. Lithium, sodium, and potassium have one electron in their outer shells. a) more b) less 18. Every atom is much more stable, or less reactive, with a ____ valence shell. a) partly full b) completely full 19. A positively-charged ion, which has fewer electrons than protons, is known as a: a) anion b) cation c) fermion d) bation 20. Bonds vary widely in their strength. Generally covalent and ionic bonds are often described as “strong”, whereas ______ bonds are generally considered to be “weak”. a) van der Waals b) Faradays c) van Neumans 21. This bonding involves sharing of electrons in which the positively charged nuclei of two or more atoms simultaneously attract the negatively charged electrons that are being shared a) ionic b) covalent c) van der Waals d) metallic 22. This bond results from electrostatic attraction between atoms: a) ionic b) covalent c) van der Waals d) metallic 23. A sea of delocalized electrons causes this bonding: a) ionic b) covalent c) van der Waals d) metallic 24. The chemical composition of minerals may vary between end members of a mineral system. For example the ______ feldspars comprise a continuous series from sodiumrich albite to calcium-rich anorthite. a) plagioclase b) orthoclase c) alkaline d) acidic 25. Crystal structure is based on ____ internal atomic arrangement. a) irregular b) regular c) random d) curvilinear 26. Pyrite and marcasite are both _______, but their arrangement of atoms differs. a) iron sulfide b) lead sulfide c) copper silfide d) silver sulfide 27. The carbon atoms in ______ are arranged into sheets which can slide easily past each other, while the carbon atoms in diamond form a strong, interlocking three-dimensional network. a) sapphire b) graphite c) aluminum d) carbonate 28. TGCFAOQTCD a) Crystal habit b) Hardness scale c) Luster scale 29. Dull to metallic, submetallic, adamantine, vitreous, pearly, resinous, or silky. a) Crystal habit b) Hardness scale c) Luster scale d) Heft scale 30. The color of the powder a mineral leaves after rubbing it on unglazed porcelain. a) color b) streak c) lustre d) iridescense 31. Describes the way a mineral may split apart along various planes. a) fracture b) streak c) lustre d) cleavage 32. In modern physics, the position of electrons about a nucleus are defined in terms of: a) probabilities b) circles c) ellipses d) chromodomes 33. The symbol H+ suggests a: a) hydrogen atom b) hydrogen isotope c) hydrogen cation d) hydrogen anion 34. The tabulated atomic mass of natural carbon is not exactly 12 because carbon in nature always has multiple ________ present. a) electrons b) isotopes c) quarks d) protons 35. This type of bonding due to delocalized electrons leads to malleability, ductility, and high melting points: a) covalent b) ionic c) van der Waals d) metallic 36. The mineral ___________ is 3 on Mohs Scale whereas the mineral ___________ is 9. a) calcite, corundum b) corundum, calcite c) caliche, calcite d) chalcedony, quartz 37. In hand specimens, geologists identify most minerals based on: a) physical properties b) chemical analyses c) xray diffraction 38. This type of chemical bonding is the weakest but occurs in all substances. a) covalent b) ionic c) metallic d) none of the above 39. Quartz, feldspar, mica, chlorite, kaolin, calcite, epidote, olivine, augite, hornblende, magnetite, hematite, limonite: these minerals are: a) common in rocks b) occasionally found c) rare d) extremely rare 40. Characteristics of a mineral do NOT include: a) naturally occurring b) characteristic chemical formula c) crystalline d) organic e) all of the above 41. The chemical composition of a particular mineral may vary between end members. For example, the common mineral plagioclase feldspar varies from being _______-rich to being _________-rich. a) sodium, calcium b) potassium, sodium c) iron, magnesium d) carbon, oxygen 42. Sharing of electrons typifies the __________ bond whereas electrostatic attraction typifies the _______ bond. a) ionic, covalent b) ionic, triclinic c) covalent, ionic d) triclinic, covalent 43. If number of protons does not equal the number of electrons, the atom is a(n) : a) isotope b) ion c) quark d) simplex e) google 44. Atoms generally consist of: a) electrons b) protons c) neutrons d) all of the above 45. Not counting rare minerals, about how many mineral species are at least occasionally encountered in rocks? a) 20 b) 200 c) 2000 46. Carbon is atomic number 6. Carbon-13 has _______ protons and _______ neutrons. a) thirteen, six b) six, seven c) twelve, twenty-five d) twelve, twelve 47. Which of these particles are not nucleons? a) electrons b) neutrons c) protons 48. A mineral with visibly recognizable crystals is said to have good crystal habit; otherwise the mineral is said to be: a) massive b) granular c) compact d) any of the above 49. In chemical bonding, two atoms become linked by moving or sharing __________. a) neutrons b) protons c) electrons 50. The name of an element is determined by the number of ______ present in the ______ of an atom. a) electrons, nucleus b) neutrons, nucleus c) protons, nucleus d) protons, electron cloud e) neutrons, electron cloud 51. Generally ________ and ____________ bonds are strong whereas the ______________ bond is weak. a) covalent, ionic, van der Waals b) van der Waals, covalent, ionic c) ionic, van der Waals, covalent 52. Which of the following are held together by chemical bonds? a) molecules b) crystals c) diatomic gases 53. An ion with fewer electrons than protons is called an ______ and it carries a _________ electric charge. a) cation, positive b) anion, negative c) cation, negative d) anion, positive 54. Two or more minerals may have the same _________ composition but different _______ structure. These are called polymorphs. a) crystal, chemical b) chemical, crystal 55. Industrial minerals are: a) gem quality b) commercially valuable c) tailings d) worthless 56. All minerals are crystalline. If the crystals are too small to see, they can be detected by: a) x-ray diffraction b) cosmic rays c) sound waves d) odor 57. If two atomes have the same number of protons but different numbers of neutrons, the atoms are _______ of the same _________. a) elements, mineral b) atoms, isotope c) elements, isotope d) isotopes, element 58. Modern physics recognizes that electrons show both particle and ______ behavior. a) wave b) emotional c) thermal d) revolting 59. Sodium and potassium have one ______ electron in their outer shells and are extremely ________. a) valence, stable b) inverted, reactive c) valence, reactive d) contaminated, inactive 60. The luster of _______ would be described as ________. a) glass, vitreous b) diamond, dull c) pyrite, silky d) graphite, resinous 61. The minerals ________ and __________ are polymorphs of carbon. a) diamond, graphite b) calcite, silicate c) bonite, bronzite 62. In the ______ atom based on _______ physics, electrons were restricted to circular orbits of fixed energy levels. a) Bohr , quantum b) Rutherford, classical c) Bohr, classical d) Rutherford, quantum 63. Virtually all elements other than ______ and _______ were formed in stars and supernovae long after the Big Bang. a) hydrogen, helium b) carbon, phosphorus c) carbon, oxygen d) silica, carbon 64. Physicist Werner _________ developed the ___________ principle which means that it is impossible to know exactly the position and momentum of a particle. a) Heisenberg, certainty b) Heisenberg, uncertainty c) Bohr, uncertainty d) Bohr, certainty

info@checkyourstudy.com