“How to Date a Black girl, Brown girl, Halfie or White girl” written by Junot Diaz

“How to Date a Black girl, Brown girl, Halfie or White girl” written by Junot Diaz

A story “How to Date a Black girl, Brown girl, … Read More...
CURR 5702 Guidelines for Writing Analysis Project 1. Find a piece of writing written by a learner with special needs or an English learner. In your write-up, describe the learner’s background in as much detail as you can (country/language of origin, age/grade, gender, length of time in U.S., educational background, level of proficiency, etc.) and the type of writing it is (journal entry, 5-paragraph essay assignment, free write, etc.). 2. Determine what aspects of language are present in the writing. a. Where is the learner strong? b. Where does he/she need help? c. What features do you notice? (this is a list to get you thinking…you do not need to address every one) i. lexical variety ii. syntactic complexity iii. control of grammatical features (nouns, verbs, preps, etc.) iv. linking features (conjunctions) v. structures that mark order (first, second, later, finally) vi. structures that reference prior elements (using the right pronouns to refer back to some person or thing already mentioned) vii. Others? 3. Consider how you might assess this writing and provide feedback to the learner. a. Will you use a rubric? b. What will you focus on? Here are some possibilities: i. Organization and content ii. Language 1. Sentence fluency 2. Grammar/spelling/word choice iii. All of the above c. How will you convey your feedback? i. In writing 1. Highlight errors 2. Choose a few of the most common errors to highlight/ have the learner correct them? (e.g. Error log) 3. Provide general feedback without marking the paper? ii. Have a conference with the learner and discuss some of the areas in need of revision d. What are the next steps in the process? 4. What are your recommendations for literacy instruction? a. Based on your analysis and connections, how might you address the needs of this learner as a teacher? This is where you can connect your project with your readings from the course (or other readings as appropriate). i. Are there strategies, activities, tools, technology, resources, etc., that would be beneficial for your learner? Describe them and be sure to cite your sources. ii. Directly link the recommendations with the observations that you made in their writing sample and with your readings. 5. Write up the writing analysis you have done. Be sure to include the writing sample as an appendix. If you reference a rubric or Error log, etc., please include that as well. You should incorporate at least 4 references into this project (you can start with the 2 course texts if you like). Be sure to cite your sources within your paper and include a list of references at the end in APA format. The evaluation rubric for this project can be found below. Rubric for Writing Analysis Performance Excellent Good Needs Improvement Unacceptable 5 points 3-4 points 1-2 points 0 points Introduction and Context Writer introduces learner and gives clear context of learner. Writer identifies learner, but does not give full context OR writer describes context, but learner information sketchy. Writer has very little information about learner and/or context. No context provided. Writing Sample Writer describes clearly writing sample. Writer is too general about how writing sample. Writer has provided very little information about sample. No information provided regarding sample or no sample provided. 13-15 points 9-12 points 4-8 points 0-3 points Identification of Writing Challenges Language challenges are clearly identified and samples given to support challenges (including transcript numbers). Clear connections made to relevant topics covered in course. Writer indicates some idea of language challenges. Some support given. Some connections made to relevant topics covered in course. Writer discusses language challenges in general; does not support in terms of transcription. Minimal effort to make connections to relevant topics covered in course. Very little or no discussion language challenges identified and little or no transcription support provided. No connections to course topics. Plan for Assessment and Feedback Clear plan for assessing writing and providing feedback to learner. General plan for assessment; feedback addressed, but more details needed. Plan for assessment not clear; feedback to learner addressed superficially. No plan for assessment or feedback. Recommendations for Instruction Recommendations for instruction are clear and well-supported. Recommendations present, but need more description and support. Recommendations are implied or only partially supported. No recommendations given. 5 points 3-4 points 1-2 points 0 points References Writer includes at least 4 credible sources. Writer includes 3 sources. Writer includes 1-2 resources. Sources not included. Writing Conventions Writing is clear. No grammatical, spelling, or punctuation errors. APA format is correct. A few grammatical, spelling, or punctuation errors. APA format is mostly correct. Some grammatical, spelling, or punctuation errors. Numerous issues with APA format. Many grammatical, spelling, or punctuation errors. APA format disregarded. Total ____ / 75 Comments:

CURR 5702 Guidelines for Writing Analysis Project 1. Find a piece of writing written by a learner with special needs or an English learner. In your write-up, describe the learner’s background in as much detail as you can (country/language of origin, age/grade, gender, length of time in U.S., educational background, level of proficiency, etc.) and the type of writing it is (journal entry, 5-paragraph essay assignment, free write, etc.). 2. Determine what aspects of language are present in the writing. a. Where is the learner strong? b. Where does he/she need help? c. What features do you notice? (this is a list to get you thinking…you do not need to address every one) i. lexical variety ii. syntactic complexity iii. control of grammatical features (nouns, verbs, preps, etc.) iv. linking features (conjunctions) v. structures that mark order (first, second, later, finally) vi. structures that reference prior elements (using the right pronouns to refer back to some person or thing already mentioned) vii. Others? 3. Consider how you might assess this writing and provide feedback to the learner. a. Will you use a rubric? b. What will you focus on? Here are some possibilities: i. Organization and content ii. Language 1. Sentence fluency 2. Grammar/spelling/word choice iii. All of the above c. How will you convey your feedback? i. In writing 1. Highlight errors 2. Choose a few of the most common errors to highlight/ have the learner correct them? (e.g. Error log) 3. Provide general feedback without marking the paper? ii. Have a conference with the learner and discuss some of the areas in need of revision d. What are the next steps in the process? 4. What are your recommendations for literacy instruction? a. Based on your analysis and connections, how might you address the needs of this learner as a teacher? This is where you can connect your project with your readings from the course (or other readings as appropriate). i. Are there strategies, activities, tools, technology, resources, etc., that would be beneficial for your learner? Describe them and be sure to cite your sources. ii. Directly link the recommendations with the observations that you made in their writing sample and with your readings. 5. Write up the writing analysis you have done. Be sure to include the writing sample as an appendix. If you reference a rubric or Error log, etc., please include that as well. You should incorporate at least 4 references into this project (you can start with the 2 course texts if you like). Be sure to cite your sources within your paper and include a list of references at the end in APA format. The evaluation rubric for this project can be found below. Rubric for Writing Analysis Performance Excellent Good Needs Improvement Unacceptable 5 points 3-4 points 1-2 points 0 points Introduction and Context Writer introduces learner and gives clear context of learner. Writer identifies learner, but does not give full context OR writer describes context, but learner information sketchy. Writer has very little information about learner and/or context. No context provided. Writing Sample Writer describes clearly writing sample. Writer is too general about how writing sample. Writer has provided very little information about sample. No information provided regarding sample or no sample provided. 13-15 points 9-12 points 4-8 points 0-3 points Identification of Writing Challenges Language challenges are clearly identified and samples given to support challenges (including transcript numbers). Clear connections made to relevant topics covered in course. Writer indicates some idea of language challenges. Some support given. Some connections made to relevant topics covered in course. Writer discusses language challenges in general; does not support in terms of transcription. Minimal effort to make connections to relevant topics covered in course. Very little or no discussion language challenges identified and little or no transcription support provided. No connections to course topics. Plan for Assessment and Feedback Clear plan for assessing writing and providing feedback to learner. General plan for assessment; feedback addressed, but more details needed. Plan for assessment not clear; feedback to learner addressed superficially. No plan for assessment or feedback. Recommendations for Instruction Recommendations for instruction are clear and well-supported. Recommendations present, but need more description and support. Recommendations are implied or only partially supported. No recommendations given. 5 points 3-4 points 1-2 points 0 points References Writer includes at least 4 credible sources. Writer includes 3 sources. Writer includes 1-2 resources. Sources not included. Writing Conventions Writing is clear. No grammatical, spelling, or punctuation errors. APA format is correct. A few grammatical, spelling, or punctuation errors. APA format is mostly correct. Some grammatical, spelling, or punctuation errors. Numerous issues with APA format. Many grammatical, spelling, or punctuation errors. APA format disregarded. Total ____ / 75 Comments:

No expert has answered this question yet. You can browse … Read More...
1 BACKGROUND The new generation of enhanced mid core PICs such as the 16F1847 and the 12F1840 have an inbuilt temperature sensor. This sensor consists of a current source which flows through four diodes in series and the voltage drop across the diodes which is proportional to temperature can be measured by internally connecting the sensor to the ADC and determining the temperature based on the ADC value In this assignment the temperature sensor is used to create a simple thermometer application and to create an alarm should the sensor go outside the set value. Assignment Details 1) Determine the register settings needed to switch the sensor on and connect the temperature sensor to the ADC. Using appropriate values for Vref+ and Vref- display the ADC count value on the 7 segment display. 2) With reference to Microchip Application Note AN1333, “Use and Calibration of the Internal Temperature Indicator” (DS01333) determine an appropriate algorithm to convert from the ADC value to the temperature in degrees centigrade and implement it using a lookup table or otherwise. Display this value on the 7 segment display. Additional marks will be given for accuracy, calibration and averaging the temperature readings to give a more accurate, and a more stable temperature reading. . 2 In order to meet the specification the following will be required. i) Selection of appropriate microcontroller to meet the requirement of the task. ii) Development of an assembly language program to control the operation of the embedded system. iii) Thorough testing to ensure correct operation of the system. iv) Produce a project report to evidence all of the above. Follow Report Requirements (20 pages max) 1) Introduction – Clearly state the scope and aims and objectives of the project: Include Aims and Objectives, i.e. break down the project into smaller attainable aims and objectives for example one objective could be to develop a program to control the LED display. If all objectives are met then the overall project should have been completed. 2) Theory – Include any relevant theory 3) Procedure, Results Discussion – The report should show a methodical, systematic design approach. The microcontroller kits in the laboratory can be used as the hardware platform, however circuit diagrams should be included in the report and explanations of operation is expected. 4) Include flowcharts and detailed explanations of software development. Include appropriate simulation screen shots. Show and discuss results e.g. ADC program, LED program, etc. Include final/complete program. Were results as expected, do they compare favourably with simulated results, what could be done to improve the operation and accuracy of the system? 5) Conclusion – Reflect back on the original aims and objectives. Were they met if not why not? What further work could be carried out to meet aims and objectives etc? 3 Marks ALLOCATION Marks are allocated for the given activities as follows: MARK (%) PROJECT WORK 60 PROJECT REPORT 30 PRESENTATION MARK 10 ______ Total 100 The marks awarded for the microcontrollers in embedded system module will be made up as follows:- PROJECT MARK Have all of the specifications been met? Correct Register settings to switch on sensor and connect temperature sensor to ADC 5% Display two different characters on the 7 segment display 5% Display the ADC count value on the 7 segment display 10% Display the temperature on the seven segment display 20% Calibration 10% Accuraccy 10% Total 60% REPORT MARK Introduction and Theory 5% Procedure, Results and Discussion 20% Report Presentation 5% Total 30% PRESENTATION (POWER POINT) & DEMO Demonstration 10% Total 10% TOTAL 100% 4 Schematic for the Assignment Seven Segment Display Code ;************************************************ ;Appropriate values to illuminate a seven segment display ;with numbers 0 – 9 are extracted from a look up table ;and output on PORTB. ;A software delay is incorporated between displaying ;successive values so that they can be observed. ;(This program is useful demonstrating software delays, ; and look up tables. ; ;************************************************ ; list p=16F1937A #include <p=16f1937.inc> ; ; ****** PROGRAM EQUATES ****** ; temp equ 0x20 value equ 0x21 outer equ 0x22 RB0 RB1 RB2 RB3 RB4 RB5 RB6 RB7 a b c d e f g dp RA1 RA0 +5V 16F84 VDD Vss 220Ω x 8 CA2 CA1 100K x 2 5K6 5K6 +5V +5V a b c d e f g a b c d e f g middle equ 0x23 inner equ 0x24 w equ 0 f equ 1 ; ; ; ****** MAIN PROGRAM ****** ; org 0x00 banksel PORTB clrf PORTB banksel ANSELB clrf ANSELB clrf ANSELA banksel TRISB movlw 0x00 ;Set port b all outputs movwf TRISB movlw 0x00 ;Set port a all inputs movwf TRISA banksel PORTB ; movlw 0x00 movwf PORTB ;turn off display ; ; ; **** DISPLAY COUNT SEQUENCE *** ; display movlw 0x00 ;Use value as a counter ie movwf value ;value is incremented every begin movf value,w ;time a value is extracted from table bsf PORTA,0 ;turn on LSB display call get ;call subroutine to get value movwf PORTB ;output value to portb call wait ;call delay subroutine incf value ;increment counter btfsc value,3 ;test to see if counter = %1010 btfss value,1 ;if not get next value, if yes goto begin ; goto display ;go to display again ; ; **** LOOK UP TABLE FOR VALUES **** ; get brw ;look up table to illuminate retlw 0xc0 ;the numbers 0 – 9 on seven segment retlw 0xf9 ;display (outputs from port are retlw 0xa4 ;active low retlw 0xb0 retlw 0x99 retlw 0x92 retlw 0x82 retlw 0xf8 retlw 0x80 retlw 0x90 ; ; **** TIME DELAY ROUTINE **** ; ( THREE NESTED LOOPS ) ; wait ;delay subroutine movlw 0x02 ;-outer loop movwf outer ; wait3 movlw 0 xff ; -middle loop movwf middle wait2 movlw 0xff ;-inner loop movwf inner wait1 decfsz inner,f goto wait1 ;-inner loop decfsz middle,f goto wait2 ;-middle loop decfsz outer,f goto wait3 ;-outer loop return end

1 BACKGROUND The new generation of enhanced mid core PICs such as the 16F1847 and the 12F1840 have an inbuilt temperature sensor. This sensor consists of a current source which flows through four diodes in series and the voltage drop across the diodes which is proportional to temperature can be measured by internally connecting the sensor to the ADC and determining the temperature based on the ADC value In this assignment the temperature sensor is used to create a simple thermometer application and to create an alarm should the sensor go outside the set value. Assignment Details 1) Determine the register settings needed to switch the sensor on and connect the temperature sensor to the ADC. Using appropriate values for Vref+ and Vref- display the ADC count value on the 7 segment display. 2) With reference to Microchip Application Note AN1333, “Use and Calibration of the Internal Temperature Indicator” (DS01333) determine an appropriate algorithm to convert from the ADC value to the temperature in degrees centigrade and implement it using a lookup table or otherwise. Display this value on the 7 segment display. Additional marks will be given for accuracy, calibration and averaging the temperature readings to give a more accurate, and a more stable temperature reading. . 2 In order to meet the specification the following will be required. i) Selection of appropriate microcontroller to meet the requirement of the task. ii) Development of an assembly language program to control the operation of the embedded system. iii) Thorough testing to ensure correct operation of the system. iv) Produce a project report to evidence all of the above. Follow Report Requirements (20 pages max) 1) Introduction – Clearly state the scope and aims and objectives of the project: Include Aims and Objectives, i.e. break down the project into smaller attainable aims and objectives for example one objective could be to develop a program to control the LED display. If all objectives are met then the overall project should have been completed. 2) Theory – Include any relevant theory 3) Procedure, Results Discussion – The report should show a methodical, systematic design approach. The microcontroller kits in the laboratory can be used as the hardware platform, however circuit diagrams should be included in the report and explanations of operation is expected. 4) Include flowcharts and detailed explanations of software development. Include appropriate simulation screen shots. Show and discuss results e.g. ADC program, LED program, etc. Include final/complete program. Were results as expected, do they compare favourably with simulated results, what could be done to improve the operation and accuracy of the system? 5) Conclusion – Reflect back on the original aims and objectives. Were they met if not why not? What further work could be carried out to meet aims and objectives etc? 3 Marks ALLOCATION Marks are allocated for the given activities as follows: MARK (%) PROJECT WORK 60 PROJECT REPORT 30 PRESENTATION MARK 10 ______ Total 100 The marks awarded for the microcontrollers in embedded system module will be made up as follows:- PROJECT MARK Have all of the specifications been met? Correct Register settings to switch on sensor and connect temperature sensor to ADC 5% Display two different characters on the 7 segment display 5% Display the ADC count value on the 7 segment display 10% Display the temperature on the seven segment display 20% Calibration 10% Accuraccy 10% Total 60% REPORT MARK Introduction and Theory 5% Procedure, Results and Discussion 20% Report Presentation 5% Total 30% PRESENTATION (POWER POINT) & DEMO Demonstration 10% Total 10% TOTAL 100% 4 Schematic for the Assignment Seven Segment Display Code ;************************************************ ;Appropriate values to illuminate a seven segment display ;with numbers 0 – 9 are extracted from a look up table ;and output on PORTB. ;A software delay is incorporated between displaying ;successive values so that they can be observed. ;(This program is useful demonstrating software delays, ; and look up tables. ; ;************************************************ ; list p=16F1937A #include ; ; ****** PROGRAM EQUATES ****** ; temp equ 0x20 value equ 0x21 outer equ 0x22 RB0 RB1 RB2 RB3 RB4 RB5 RB6 RB7 a b c d e f g dp RA1 RA0 +5V 16F84 VDD Vss 220Ω x 8 CA2 CA1 100K x 2 5K6 5K6 +5V +5V a b c d e f g a b c d e f g middle equ 0x23 inner equ 0x24 w equ 0 f equ 1 ; ; ; ****** MAIN PROGRAM ****** ; org 0x00 banksel PORTB clrf PORTB banksel ANSELB clrf ANSELB clrf ANSELA banksel TRISB movlw 0x00 ;Set port b all outputs movwf TRISB movlw 0x00 ;Set port a all inputs movwf TRISA banksel PORTB ; movlw 0x00 movwf PORTB ;turn off display ; ; ; **** DISPLAY COUNT SEQUENCE *** ; display movlw 0x00 ;Use value as a counter ie movwf value ;value is incremented every begin movf value,w ;time a value is extracted from table bsf PORTA,0 ;turn on LSB display call get ;call subroutine to get value movwf PORTB ;output value to portb call wait ;call delay subroutine incf value ;increment counter btfsc value,3 ;test to see if counter = %1010 btfss value,1 ;if not get next value, if yes goto begin ; goto display ;go to display again ; ; **** LOOK UP TABLE FOR VALUES **** ; get brw ;look up table to illuminate retlw 0xc0 ;the numbers 0 – 9 on seven segment retlw 0xf9 ;display (outputs from port are retlw 0xa4 ;active low retlw 0xb0 retlw 0x99 retlw 0x92 retlw 0x82 retlw 0xf8 retlw 0x80 retlw 0x90 ; ; **** TIME DELAY ROUTINE **** ; ( THREE NESTED LOOPS ) ; wait ;delay subroutine movlw 0x02 ;-outer loop movwf outer ; wait3 movlw 0 xff ; -middle loop movwf middle wait2 movlw 0xff ;-inner loop movwf inner wait1 decfsz inner,f goto wait1 ;-inner loop decfsz middle,f goto wait2 ;-middle loop decfsz outer,f goto wait3 ;-outer loop return end

No expert has answered this question yet. You can browse … Read More...
A community bird-watching society makes and sells simple bird feeders to raise money for its conservation activities. The materials for each feeder cost $3, and the society sells an average of 20 feeders per week at a price of $7 each. The society has been considering raising the price, so it conducts a survey and finds that for every dollar increase, it loses 2 sales per week. (a) Find a function P that models weekly profit in terms of price per feeder. (Let x be the price per feeder.) P(x) = (b) What price should the society charge for each feeder to maximize profits? $ What is the maximum weekly profit? $

A community bird-watching society makes and sells simple bird feeders to raise money for its conservation activities. The materials for each feeder cost $3, and the society sells an average of 20 feeders per week at a price of $7 each. The society has been considering raising the price, so it conducts a survey and finds that for every dollar increase, it loses 2 sales per week. (a) Find a function P that models weekly profit in terms of price per feeder. (Let x be the price per feeder.) P(x) = (b) What price should the society charge for each feeder to maximize profits? $ What is the maximum weekly profit? $

No expert has answered this question yet. You can browse … Read More...
For centuries, misconceptions about the female anatomy have resulted in social policies and attitudes concerning: Question 2 options: The kinds of activities women could engage in The ability for women to hold jobs The sources of mental illness in women All of the above

For centuries, misconceptions about the female anatomy have resulted in social policies and attitudes concerning: Question 2 options: The kinds of activities women could engage in The ability for women to hold jobs The sources of mental illness in women All of the above

For centuries, misconceptions about the female anatomy have resulted in … Read More...
. Read the article on Lean Production at Jaguar (when it used to be part of Ford) which is provided at the link: http://businesscasestudies.co.uk/jaguar/lean-production/introduction.html#axzz2SrprdGnx Once you read this case study answer the following questions: (a) A generic pharmaceutical company wanted to implement Lean Manufacturing in their manufacturing process. They hired a project manager X from the automotive industry who had extensive experience implementing lean. Extract some lessons learned and best practices from the Jaguar case study that pharmaceutical company could implement at their plant once the new project manager in charge of lean came onboard. Explain each point in detail. Also, state any additional steps that project manager X could take to implement lean at pharmaceutical company. [10 points].

. Read the article on Lean Production at Jaguar (when it used to be part of Ford) which is provided at the link: http://businesscasestudies.co.uk/jaguar/lean-production/introduction.html#axzz2SrprdGnx Once you read this case study answer the following questions: (a) A generic pharmaceutical company wanted to implement Lean Manufacturing in their manufacturing process. They hired a project manager X from the automotive industry who had extensive experience implementing lean. Extract some lessons learned and best practices from the Jaguar case study that pharmaceutical company could implement at their plant once the new project manager in charge of lean came onboard. Explain each point in detail. Also, state any additional steps that project manager X could take to implement lean at pharmaceutical company. [10 points].

1) Transforming patterns of working relationships across all verticals The … Read More...
1 Before-class Preparation: Project Management Use the following questions to guide your reading and preparation for the iRAT/tRAT quiz. 1. Pre-lecture reading: Read the Textbook Chapter 7 from page 59 to page 63 “Step 3: Plan and manage the project”. 1) What is the three-part basic sequence of project management activities? 2) Fill in the blanks. During the “Plan” activity, a schedule shows will work on issues and materials will be applied to task? 3) Fill in the blank. During the “Assess” activity, periodic help keep team and customers informed of the state of the project. 2. Pre-lecture reading: Read the handout “Project Management – Creating a Project Schedule”. 1) What are the three aspects that need to be addressed when planning a project? 2) What are the two ways of presenting a WBS? Are task dependencies considered when creating a WBS? 3) In a network diagram, why do some tasks have to be completed in a specific order? What is the predecessor(s) of a task? 4) In a Gantt chart, what information can be derived from the “bar” for each task? What about the arrows? 5) What is a critical path? How to determine the total duration of a project? In order to reduce the project duration, should tasks on the critical path get additional resources or tasks not on the critical path? 3. Pre-lecture homework: answer all questions above. First copy each question then write down the answer. Submit the homework to Blackboard and also bring in the completed homework to the RAT quiz to use as a cheat sheet.

1 Before-class Preparation: Project Management Use the following questions to guide your reading and preparation for the iRAT/tRAT quiz. 1. Pre-lecture reading: Read the Textbook Chapter 7 from page 59 to page 63 “Step 3: Plan and manage the project”. 1) What is the three-part basic sequence of project management activities? 2) Fill in the blanks. During the “Plan” activity, a schedule shows will work on issues and materials will be applied to task? 3) Fill in the blank. During the “Assess” activity, periodic help keep team and customers informed of the state of the project. 2. Pre-lecture reading: Read the handout “Project Management – Creating a Project Schedule”. 1) What are the three aspects that need to be addressed when planning a project? 2) What are the two ways of presenting a WBS? Are task dependencies considered when creating a WBS? 3) In a network diagram, why do some tasks have to be completed in a specific order? What is the predecessor(s) of a task? 4) In a Gantt chart, what information can be derived from the “bar” for each task? What about the arrows? 5) What is a critical path? How to determine the total duration of a project? In order to reduce the project duration, should tasks on the critical path get additional resources or tasks not on the critical path? 3. Pre-lecture homework: answer all questions above. First copy each question then write down the answer. Submit the homework to Blackboard and also bring in the completed homework to the RAT quiz to use as a cheat sheet.

ECON 101 FALL 2015 EXAM 1 NAME:______________________________ 1. Suppose the price elasticity of demand for cheeseburgers equals 1.37. This means the overall demand for cheeseburgers is: A) price elastic. B) price inelastic. C) price unit-elastic. D) perfectly price inelastic. 2. The price elasticity of demand for skiing lessons in New Hampshire is less than 1.00. This means that the demand is ______ in New Hampshire. A) price elastic B) price inelastic C) price unit-elastic D) perfectly price elastic 3. If the demand for textbooks is price inelastic, which of the following would explain this? A) Many alternative textbooks can be used as substitutes. B) Students have a lot of time to adjust to price changes. C) Textbook purchases consume a large portion of most students’ income. D) The good is a necessity. 4. A major state university in the South recently raised tuition by 12%. An economics professor at this university asked his students, “Due to the increase in tuition, how many of you will transfer to another university?” One student out of about 300 said that he or she would transfer. Based on this information, the price elasticity of demand for education at this university is: (Hint: one out of 300 is how much of a percentage change? Which percentage change is greater – tuition or transfer? Apply the basic formula for elasticity that I put on the board a few times.) A) one. B) highly elastic. C) highly inelastic. D) zero. 5. Suppose the price elasticity of demand for fishing lures equals 1 in South Carolina and 0.63 in Alabama. To increase revenue, fishing lure manufacturers should: (Hint: If the demand for a product is inelastic, the price can go up and you’ll still buy it, since there are no or few substitutes. If the demand for a product is elastic, the price can go up and you’ll probably walk away from it, since substitutes are available. How might this info impact the pricing strategies of firms?) A) lower prices in each state. B) raise prices in each state. C) lower prices in South Carolina and raise prices in Alabama. D) leave prices unchanged in South Carolina and raise prices in Alabama. Read your syllabus and answer questions 6 through 10: 6. T or F: Disruptive classroom behavior includes the following: chatting with fellow students, use of electronic devices such as laptops, tablets, notebooks, and cell phones, reading or studying during class, sleeping, arriving late, departing early, studying for another class, or in any other way disturbing the class. 7. T or F: It’s OK to use my computer in class or play with my phone. There is no penalty attached to these activities and Keiser doesn’t really mind. 8. T or F: It’s OK to show up late for class and disrupt one of Keiser’s swashbuckling lectures. 9. T or F: Attendance is highly optional since it doesn’t impact my final course grade. 10. T or F: I should blow off the career plan/business plan assignment in this course because it’s unimportant to my future and not worth many points. 11. Jacquelyn is a student at a major state university. Which of the following is not an example of an explicit, or direct, cost of her attending college? A) Tuition B) Textbooks C) the salary that she could have earned working full time D) computer lab fees 12. The two principles of tax fairness are: A) the minimize distortions principle and the maximize revenue principle. B) the benefits principle and the ability-to-pay principle. C) the proportional tax principle and the ability-to-pay principle. D) the equity principle and the efficiency principle. 13. The benefits principles says: A) the amount of tax paid depends on the measure of value. B) those who benefit from public spending should bear the burden of the tax that pays for that spending. C) those with greater ability to pay should pay more tax. D) those who benefit from the tax should pay the same percentage of the tax base as those who do not benefit. 14. A tax that rises less than in proportion to income is described as: (Hint: This would have more of a negative impact on lower income earners vs. higher income earners.) A) progressive. B) proportional. C) regressive. D) structural. 15. The U.S. income tax is _______, while the payroll tax is _______. (Hint: Think income tax vs. Social Security tax.) A) progressive; progressive C) regressive; progressive B) progressive; regressive D) regressive; regressive 16. Who is currently leading in the polls to receive the Republican nomination as that party’s presidential candidate? A) Qasem Soleimani B) Abu Bakr al-Baghdadi C) Osama bin Laden D) Donald J. Trump 17. The single most important thing I’ve learned in class this term is: A) stay in frickin’ school B) stay in school and make a plan for life and my career C) the use of cheese for skyscraper construction D) both A and B above 18. Market equilibrium occurs when: A) there is no incentive for prices to change in the market. B) quantity demanded equals quantity supplied. C) the market clears. D) all of the above occur. 19. Excess supply occurs when: (Hint: Draw a supply and demand graph! Think about price ceilings and floors and the graphs of these we discussed in class.) A) the price is above the equilibrium price. B) the quantity demanded exceeds the quantity supplied. C) the price is below the equilibrium price. D) both b and c occur. 20. The single most important thing I’ve learned in class this term is: a. stay in school and look into either a study abroad or internship experience b. stay in school and make a plan for life and my career c. the untimely demise of Cecil the lion in Zimbabwe d. both a. and b. above 21. According to the textbook definition, mainstream microeconomics generally focuses on a. how individual decision-making units, like households and firms, make economic decisions. b. the performance of the national economy and policies to improve this performance. c. the relationship between economic and political institutions. d. the general level of prices in the national economy. 22. Which of the following is the best summary of the three basic economic questions? a. Who? Why? and When? b. What? How? and Who? c. When? Where? and Why? d. What? Where? and Who? 23. Which of the following is not one of the basic economic resources? a. land b. labor c. capital d. cheese e. entrepreneurship 24. The largest country in the Arabian Peninsula and home to the cities of Riyadh, Jeddah, Mecca, and Medina is: a. The Kingdom of Saudi Arabia b. California c. Spain d. Kentucky 25. T or F: The law of demand explains the upward slope of the supply curve. 26. In economics, a “marginal” value refers to: a. the value associated with an important or marginal activity. b. a value entered as an explanatory item in the margin of a balance sheet or other accounts. c. the value associated with one more unit of an activity. d. a value that is most appropriately identified in a footnote. 27. A government mandated price that is below the market equilibrium price is sometimes called. . . (Hint: Draw a graph again and think about what the government is trying to accomplish.) a. a price ceiling. b. a price floor. c. a market clearing price. d. a reservation price. 28. T or F: Entering the US job market without any education or training is crazy and should be avoided. Stay in frickin’ school, baby! 29. The law of demand states that, other things equal: a. as the price increases, the quantity demanded will increase. b. as the price decreases, the demand curve will shift to the right. c. as the price increases, the quantity demanded will decrease. d. none of the above. 30. The law of supply says: a. other things equal, the quantity supplied of a good is inversely related to the price of the good. b. other things equal, the supply of a good creates its own demand. c. other things equal, the quantity supplied of a good is positively related to the price of the good. d. none of the above. 31. A perfectly inelastic demand curve is: a. horizontal. b. downward sloping. c. upward sloping. d. vertical. 32. A trade-off involves weighing costs and benefits. a. true b. false 33. A perfectly elastic demand curve is: a. horizontal. b. downward sloping. c. upward sloping. d. vertical. 34. The second most important thing I’ve learned in class this term is: a. despair is not an option b. Donald J. Trump’s hair is real c. the use of cheese for skyscraper construction d. none of the above 35. T or F: Virtually any news item has important economic dimensions and consequences. 36. T or F: When studying economics, always think in terms of historical context. 37. This popular Asian country is populated by 1.3 billion people, has the world’s second largest economy, and uses a language that’s been in continuous use for nearly 5,000 years: a. Kentucky b. California c. Spain d. China 38. T or F: The top priority in my life right now should be my education and an internship experience. Without these, the job market is going to kick my butt! 39. Which of the following is a key side effect generated by the use of price ceilings? a. black markets b. products with too high of quality c. an excess supply of a good d. too many resources artificially channeled into the production of a good 40. Which of the following is NOT one of the four basic principles for understanding individual choice? a. Resources are scarce. b. The real cost of something is the money that you must pay to get it. c. “How much?” is a decision at the margin. d. People usually take advantage of opportunities to make themselves better off. 41. A hot mixture of pan drippings, flour, and water is commonly known as: a. interest rates and expected future real GDP. b. interest rates and current real GDP. c. inflation and expected future real GDP. d. gravy. 42. The example we used in class when discussing the inefficiency of quantity quotas was: a. Uber b. General Electric c. AT&T d. the KSU marching band 43. The term we learned in class signifying a key method of non-price competition is: a. excess supply chain management b. arbitrage c. swashbuckling d. product differentiation 44. When discussing market failure and the role of regulation in class, which company/product did we use as an example? a. Pabst Blue Ribbon b. JetBlue c. Blue Bell d. Blue Apron 45. Governments may place relatively high sales taxes on goods such as alcohol and tobacco because: a. such taxes are a significant source of revenue b. such goods exhibit inelastic demand c. such taxes may discourage use of these products d. all of the above 46. When discussing the cost of higher education in class, which country did we cite as an example of one that offers free college for qualifying students? a. USSR b. Rhodesia c. Czechoslovakia d. Germany 47. Which of the following is not an example of market failure we discussed in class? a. externalities b. public goods c. fungible goods d. common pool resources e. equity 48. T or F: As we discussed in class, the real reason why the US has lost jobs to China is the “most favored nation” (MFN) trading status granted to China by the US back in the 1980s. 49. The dude we talked about in class who coined the expression “invisible hand” and promoted self-interest and competition in his famous book “The Wealth of Nations” is: a. Abu Bakr al-Baghdadi b. Ali Khamenei c. Donald J. Trump d. Adam Smith 50. When studying for your final exams and attempting to allocate your limited time among several subjects in order to maximize your course grades (recall, we talked about this example during the first week of class), you’re almost unconsciously engaging in a form of: a. fraud b. miscellaneous serendipity b. mitosis d. marginal analysis

ECON 101 FALL 2015 EXAM 1 NAME:______________________________ 1. Suppose the price elasticity of demand for cheeseburgers equals 1.37. This means the overall demand for cheeseburgers is: A) price elastic. B) price inelastic. C) price unit-elastic. D) perfectly price inelastic. 2. The price elasticity of demand for skiing lessons in New Hampshire is less than 1.00. This means that the demand is ______ in New Hampshire. A) price elastic B) price inelastic C) price unit-elastic D) perfectly price elastic 3. If the demand for textbooks is price inelastic, which of the following would explain this? A) Many alternative textbooks can be used as substitutes. B) Students have a lot of time to adjust to price changes. C) Textbook purchases consume a large portion of most students’ income. D) The good is a necessity. 4. A major state university in the South recently raised tuition by 12%. An economics professor at this university asked his students, “Due to the increase in tuition, how many of you will transfer to another university?” One student out of about 300 said that he or she would transfer. Based on this information, the price elasticity of demand for education at this university is: (Hint: one out of 300 is how much of a percentage change? Which percentage change is greater – tuition or transfer? Apply the basic formula for elasticity that I put on the board a few times.) A) one. B) highly elastic. C) highly inelastic. D) zero. 5. Suppose the price elasticity of demand for fishing lures equals 1 in South Carolina and 0.63 in Alabama. To increase revenue, fishing lure manufacturers should: (Hint: If the demand for a product is inelastic, the price can go up and you’ll still buy it, since there are no or few substitutes. If the demand for a product is elastic, the price can go up and you’ll probably walk away from it, since substitutes are available. How might this info impact the pricing strategies of firms?) A) lower prices in each state. B) raise prices in each state. C) lower prices in South Carolina and raise prices in Alabama. D) leave prices unchanged in South Carolina and raise prices in Alabama. Read your syllabus and answer questions 6 through 10: 6. T or F: Disruptive classroom behavior includes the following: chatting with fellow students, use of electronic devices such as laptops, tablets, notebooks, and cell phones, reading or studying during class, sleeping, arriving late, departing early, studying for another class, or in any other way disturbing the class. 7. T or F: It’s OK to use my computer in class or play with my phone. There is no penalty attached to these activities and Keiser doesn’t really mind. 8. T or F: It’s OK to show up late for class and disrupt one of Keiser’s swashbuckling lectures. 9. T or F: Attendance is highly optional since it doesn’t impact my final course grade. 10. T or F: I should blow off the career plan/business plan assignment in this course because it’s unimportant to my future and not worth many points. 11. Jacquelyn is a student at a major state university. Which of the following is not an example of an explicit, or direct, cost of her attending college? A) Tuition B) Textbooks C) the salary that she could have earned working full time D) computer lab fees 12. The two principles of tax fairness are: A) the minimize distortions principle and the maximize revenue principle. B) the benefits principle and the ability-to-pay principle. C) the proportional tax principle and the ability-to-pay principle. D) the equity principle and the efficiency principle. 13. The benefits principles says: A) the amount of tax paid depends on the measure of value. B) those who benefit from public spending should bear the burden of the tax that pays for that spending. C) those with greater ability to pay should pay more tax. D) those who benefit from the tax should pay the same percentage of the tax base as those who do not benefit. 14. A tax that rises less than in proportion to income is described as: (Hint: This would have more of a negative impact on lower income earners vs. higher income earners.) A) progressive. B) proportional. C) regressive. D) structural. 15. The U.S. income tax is _______, while the payroll tax is _______. (Hint: Think income tax vs. Social Security tax.) A) progressive; progressive C) regressive; progressive B) progressive; regressive D) regressive; regressive 16. Who is currently leading in the polls to receive the Republican nomination as that party’s presidential candidate? A) Qasem Soleimani B) Abu Bakr al-Baghdadi C) Osama bin Laden D) Donald J. Trump 17. The single most important thing I’ve learned in class this term is: A) stay in frickin’ school B) stay in school and make a plan for life and my career C) the use of cheese for skyscraper construction D) both A and B above 18. Market equilibrium occurs when: A) there is no incentive for prices to change in the market. B) quantity demanded equals quantity supplied. C) the market clears. D) all of the above occur. 19. Excess supply occurs when: (Hint: Draw a supply and demand graph! Think about price ceilings and floors and the graphs of these we discussed in class.) A) the price is above the equilibrium price. B) the quantity demanded exceeds the quantity supplied. C) the price is below the equilibrium price. D) both b and c occur. 20. The single most important thing I’ve learned in class this term is: a. stay in school and look into either a study abroad or internship experience b. stay in school and make a plan for life and my career c. the untimely demise of Cecil the lion in Zimbabwe d. both a. and b. above 21. According to the textbook definition, mainstream microeconomics generally focuses on a. how individual decision-making units, like households and firms, make economic decisions. b. the performance of the national economy and policies to improve this performance. c. the relationship between economic and political institutions. d. the general level of prices in the national economy. 22. Which of the following is the best summary of the three basic economic questions? a. Who? Why? and When? b. What? How? and Who? c. When? Where? and Why? d. What? Where? and Who? 23. Which of the following is not one of the basic economic resources? a. land b. labor c. capital d. cheese e. entrepreneurship 24. The largest country in the Arabian Peninsula and home to the cities of Riyadh, Jeddah, Mecca, and Medina is: a. The Kingdom of Saudi Arabia b. California c. Spain d. Kentucky 25. T or F: The law of demand explains the upward slope of the supply curve. 26. In economics, a “marginal” value refers to: a. the value associated with an important or marginal activity. b. a value entered as an explanatory item in the margin of a balance sheet or other accounts. c. the value associated with one more unit of an activity. d. a value that is most appropriately identified in a footnote. 27. A government mandated price that is below the market equilibrium price is sometimes called. . . (Hint: Draw a graph again and think about what the government is trying to accomplish.) a. a price ceiling. b. a price floor. c. a market clearing price. d. a reservation price. 28. T or F: Entering the US job market without any education or training is crazy and should be avoided. Stay in frickin’ school, baby! 29. The law of demand states that, other things equal: a. as the price increases, the quantity demanded will increase. b. as the price decreases, the demand curve will shift to the right. c. as the price increases, the quantity demanded will decrease. d. none of the above. 30. The law of supply says: a. other things equal, the quantity supplied of a good is inversely related to the price of the good. b. other things equal, the supply of a good creates its own demand. c. other things equal, the quantity supplied of a good is positively related to the price of the good. d. none of the above. 31. A perfectly inelastic demand curve is: a. horizontal. b. downward sloping. c. upward sloping. d. vertical. 32. A trade-off involves weighing costs and benefits. a. true b. false 33. A perfectly elastic demand curve is: a. horizontal. b. downward sloping. c. upward sloping. d. vertical. 34. The second most important thing I’ve learned in class this term is: a. despair is not an option b. Donald J. Trump’s hair is real c. the use of cheese for skyscraper construction d. none of the above 35. T or F: Virtually any news item has important economic dimensions and consequences. 36. T or F: When studying economics, always think in terms of historical context. 37. This popular Asian country is populated by 1.3 billion people, has the world’s second largest economy, and uses a language that’s been in continuous use for nearly 5,000 years: a. Kentucky b. California c. Spain d. China 38. T or F: The top priority in my life right now should be my education and an internship experience. Without these, the job market is going to kick my butt! 39. Which of the following is a key side effect generated by the use of price ceilings? a. black markets b. products with too high of quality c. an excess supply of a good d. too many resources artificially channeled into the production of a good 40. Which of the following is NOT one of the four basic principles for understanding individual choice? a. Resources are scarce. b. The real cost of something is the money that you must pay to get it. c. “How much?” is a decision at the margin. d. People usually take advantage of opportunities to make themselves better off. 41. A hot mixture of pan drippings, flour, and water is commonly known as: a. interest rates and expected future real GDP. b. interest rates and current real GDP. c. inflation and expected future real GDP. d. gravy. 42. The example we used in class when discussing the inefficiency of quantity quotas was: a. Uber b. General Electric c. AT&T d. the KSU marching band 43. The term we learned in class signifying a key method of non-price competition is: a. excess supply chain management b. arbitrage c. swashbuckling d. product differentiation 44. When discussing market failure and the role of regulation in class, which company/product did we use as an example? a. Pabst Blue Ribbon b. JetBlue c. Blue Bell d. Blue Apron 45. Governments may place relatively high sales taxes on goods such as alcohol and tobacco because: a. such taxes are a significant source of revenue b. such goods exhibit inelastic demand c. such taxes may discourage use of these products d. all of the above 46. When discussing the cost of higher education in class, which country did we cite as an example of one that offers free college for qualifying students? a. USSR b. Rhodesia c. Czechoslovakia d. Germany 47. Which of the following is not an example of market failure we discussed in class? a. externalities b. public goods c. fungible goods d. common pool resources e. equity 48. T or F: As we discussed in class, the real reason why the US has lost jobs to China is the “most favored nation” (MFN) trading status granted to China by the US back in the 1980s. 49. The dude we talked about in class who coined the expression “invisible hand” and promoted self-interest and competition in his famous book “The Wealth of Nations” is: a. Abu Bakr al-Baghdadi b. Ali Khamenei c. Donald J. Trump d. Adam Smith 50. When studying for your final exams and attempting to allocate your limited time among several subjects in order to maximize your course grades (recall, we talked about this example during the first week of class), you’re almost unconsciously engaging in a form of: a. fraud b. miscellaneous serendipity b. mitosis d. marginal analysis

info@checkyourstudy.com
(b) Based on the lessons learned, best practices and any additional steps you came up with in part (a), what if project manager X then got a job at Bank of America. Would it be possible for him/her to implement lean in the banking industry based on experience from the previous positions held at the automotive plant and the pharmaceutical company? Please state yes or no and explain the logic clearly for the same. Also, explain the steps that project manager X could take to implement lean at Bank of America (in the service industry) [10 points] You can refer to your class notes and will also have to do research online for both parts (a) and (b). Please state all the references used for each question.

(b) Based on the lessons learned, best practices and any additional steps you came up with in part (a), what if project manager X then got a job at Bank of America. Would it be possible for him/her to implement lean in the banking industry based on experience from the previous positions held at the automotive plant and the pharmaceutical company? Please state yes or no and explain the logic clearly for the same. Also, explain the steps that project manager X could take to implement lean at Bank of America (in the service industry) [10 points] You can refer to your class notes and will also have to do research online for both parts (a) and (b). Please state all the references used for each question.

Yes, lean can be applied to the banking industry.   … Read More...