Max Weber introduced the concept of verstehen. How would you use this approach to social research if you wanted to investigate the importance of money to your peers?

Max Weber introduced the concept of verstehen. How would you use this approach to social research if you wanted to investigate the importance of money to your peers?

Verstehen is accepting social behaviour by putting oneself in the … Read More...
Assignment 3 Due: 11:59pm on Friday, February 14, 2014 You will receive no credit for items you complete after the assignment is due. Grading Policy Problem 2.68 As a science project, you drop a watermelon off the top of the Empire State Building, 320 m above the sidewalk. It so happens that Superman flies by at the instant you release the watermelon. Superman is headed straight down with a speed of 36.0 . Part A How fast is the watermelon going when it passes Superman? Express your answer with the appropriate units. ANSWER: Correct Problem 2.63 A motorist is driving at when she sees that a traffic light ahead has just turned red. She knows that this light stays red for , and she wants to reach the light just as it turns green again. It takes her to step on the brakes and begin slowing. Part A What is her speed as she reaches the light at the instant it turns green? Express your answer with the appropriate units. ANSWER: m/s 72.0 ms 20 m/s 200 m 15 s 1.0 s 5.71 ms Correct Conceptual Question 4.1 Part A At this instant, is the particle in the figurespeeding up, slowing down, or traveling at constant speed? ANSWER: Correct Part B Is this particle curving to the right, curving to the left, or traveling straight? Speeding up Slowing down Traveling at constant speed ANSWER: Correct Conceptual Question 4.2 Part A At this instant, is the particle in the following figure speeding up, slowing down, or traveling at constant speed? ANSWER: Curving to the right Curving to the left Traveling straight Correct Part B Is this particle curving upward, curving downward, or traveling straight? ANSWER: Correct Problem 4.8 A particle’s trajectory is described by and , where is in s. Part A What is the particle’s speed at ? ANSWER: The particle is speeding up. The particle is slowing down. The particle is traveling at constant speed. The particle is curving upward. The particle is curving downward. The particle is traveling straight. x = ( 1 −2 ) m 2 t3 t2 y = ( 1 −2t) m 2 t2 t t = 0 s v = 2 m/s Correct Part B What is the particle’s speed at ? Express your answer using two significant figures. ANSWER: Correct Part C What is the particle’s direction of motion, measured as an angle from the x-axis, at ? Express your answer using two significant figures. ANSWER: Correct Part D What is the particle’s direction of motion, measured as an angle from the x-axis, at ? Express your answer using two significant figures. ANSWER: t = 5.0s v = 18 m/s t = 0 s  = -90  counterclockwise from the +x axis. t = 5.0s  = 9.7  counterclockwise from the +x axis. Correct Problem 4.9 A rocket-powered hockey puck moves on a horizontal frictionless table. The figure shows the graph of and the figure shows the graph of , the x- and y-components of the puck’s velocity, respectively. The puck starts at the origin. Part A In which direction is the puck moving at = 3 ? Give your answer as an angle from the x-axis. Express your answer using two significant figures. ANSWER: Correct Part B vx vy t s = 51   above the x-axis How far from the origin is the puck at 5 ? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Enhanced EOC: Problem 4.13 A rifle is aimed horizontally at a target 51.0 away. The bullet hits the target 1.50 below the aim point. You may want to review ( pages 91 – 95) . For help with math skills, you may want to review: Quadratic Equations Part A What was the bullet’s flight time? Express your answer with the appropriate units. Hint 1. How to approach the problem Start by drawing a picture of the bullet’s trajectory, including where it leaves the gun and where it hits the target. You can assume that the gun was held parallel to the ground. Label the distances given in the problem. Choose an x-y coordinate system, making sure to label the origin. It is conventional to have x in the horizontal direction and y in the vertical direction. What is the y coordinate when the bullet leaves the gun? What is the y coordinate when it hits the target? What is the initial velocity in the y direction? What is the acceleration in the y direction? What is the equation that describes the motion in the vertical y direction as a function of time? Can you use the equation for to determine the time of flight? Why was it not necessary to include the motion in the x direction? s s = 180 cm m cm y(t) y(t) ANSWER: Correct Part B What was the bullet’s speed as it left the barrel? Express your answer with the appropriate units. Hint 1. How to approach the problem In the coordinate system introduced in Part A, what are the x coordinates when the bullet leaves the gun and when it hits the target? Is there any acceleration in the x direction? What is the equation that describes the motion in the horizontal x direction as a function of time? Can you use the equation for to determine the initial velocity? ANSWER: Correct Introduction to Projectile Motion Learning Goal: To understand the basic concepts of projectile motion. Projectile motion may seem rather complex at first. However, by breaking it down into components, you will find that it is really no different than the one-dimensional motions that you have already studied. One of the most often used techniques in physics is to divide two- and three-dimensional quantities into components. For instance, in projectile motion, a particle has some initial velocity . In general, this velocity can point in any direction on the xy plane and can have any magnitude. To make a problem more managable, it is common to break up such a quantity into its x component and its y component . 5.53×10−2 s x(t) x(t) 922 ms v vx vy Consider a particle with initial velocity that has magnitude 12.0 and is directed 60.0 above the negative x axis. Part A What is the x component of ? Express your answer in meters per second. ANSWER: Correct Part B What is the y component of ? Express your answer in meters per second. ANSWER: Correct Breaking up the velocities into components is particularly useful when the components do not affect each other. Eventually, you will learn about situations in which the components of velocity do affect one another, but for now you will only be looking at problems where they do not. So, if there is acceleration in the x direction but not in the y direction, then the x component of the velocity will change, but the y component of the velocity will not. Part C Look at this applet. The motion diagram for a projectile is displayed, as are the motion diagrams for each component. The x-component motion diagram is what you would get if you shined a spotlight down on the particle as it moved and recorded the motion of its shadow. Similarly, if you shined a spotlight to the left and recorded the particle’s shadow, you would get the motion diagram for its y component. How would you describe the two motion diagrams for the components? ANSWER: v m/s degrees vx v vx = -6.00 m/s vy v vy = 10.4 m/s Correct As you can see, the two components of the motion obey their own independent kinematic laws. For the vertical component, there is an acceleration downward with magnitude . Thus, you can calculate the vertical position of the particle at any time using the standard kinematic equation . Similarly, there is no acceleration in the horizontal direction, so the horizontal position of the particle is given by the standard kinematic equation . Now, consider this applet. Two balls are simultaneously dropped from a height of 5.0 . Part D How long does it take for the balls to reach the ground? Use 10 for the magnitude of the acceleration due to gravity. Express your answer in seconds to two significant figures. Hint 1. How to approach the problem The balls are released from rest at a height of 5.0 at time . Using these numbers and basic kinematics, you can determine the amount of time it takes for the balls to reach the ground. ANSWER: Correct This situation, which you have dealt with before (motion under the constant acceleration of gravity), is actually a special case of projectile motion. Think of this as projectile motion where the horizontal component of the initial velocity is zero. Both the vertical and horizontal components exhibit motion with constant nonzero acceleration. The vertical component exhibits motion with constant nonzero acceleration, whereas the horizontal component exhibits constant-velocity motion. The vertical component exhibits constant-velocity motion, whereas the horizontal component exhibits motion with constant nonzero acceleration. Both the vertical and horizontal components exhibit motion with constant velocity. g = 10 m/s2 y = y0 + v0 t + (1/2)at2 x = x0 + v0 t m tg m/s2 m t = 0 s tg = 1.0 s Part E Imagine the ball on the left is given a nonzero initial speed in the horizontal direction, while the ball on the right continues to fall with zero initial velocity. What horizontal speed must the ball on the left start with so that it hits the ground at the same position as the ball on the right? Remember that the two balls are released, starting a horizontal distance of 3.0 apart. Express your answer in meters per second to two significant figures. Hint 1. How to approach the problem Recall from Part B that the horizontal component of velocity does not change during projectile motion. Therefore, you need to find the horizontal component of velocity such that, in a time , the ball will move horizontally 3.0 . You can assume that its initial x coordinate is . ANSWER: Correct You can adjust the horizontal speeds in this applet. Notice that regardless of what horizontal speeds you give to the balls, they continue to move vertically in the same way (i.e., they are at the same y coordinate at the same time). Problem 4.12 A ball thrown horizontally at 27 travels a horizontal distance of 49 before hitting the ground. Part A From what height was the ball thrown? Express your answer using two significant figures with the appropriate units. ANSWER: vx m vx tg = 1.0 s m x0 = 0.0 m vx = 3.0 m/s m/s m h = 16 m Correct Enhanced EOC: Problem 4.20 The figure shows the angular-velocity-versus-time graph for a particle moving in a circle. You may want to review ( page ) . For help with math skills, you may want to review: The Definite Integral Part A How many revolutions does the object make during the first 3.5 ? Express your answer using two significant figures. You did not open hints for this part. ANSWER: s n = Incorrect; Try Again Problem 4.26 To withstand “g-forces” of up to 10 g’s, caused by suddenly pulling out of a steep dive, fighter jet pilots train on a “human centrifuge.” 10 g’s is an acceleration of . Part A If the length of the centrifuge arm is 10.0 , at what speed is the rider moving when she experiences 10 g’s? Express your answer with the appropriate units. ANSWER: Correct Problem 4.28 Your roommate is working on his bicycle and has the bike upside down. He spins the 60.0 -diameter wheel, and you notice that a pebble stuck in the tread goes by three times every second. Part A What is the pebble’s speed? Express your answer with the appropriate units. ANSWER: Correct 98 m/s2 m 31.3 ms cm 5.65 ms Part B What is the pebble’s acceleration? Express your answer with the appropriate units. ANSWER: Correct Enhanced EOC: Problem 4.43 On the Apollo 14 mission to the moon, astronaut Alan Shepard hit a golf ball with a 6 iron. The acceleration due to gravity on the moon is 1/6 of its value on earth. Suppose he hits the ball with a speed of 13 at an angle 50 above the horizontal. You may want to review ( pages 90 – 95) . For help with math skills, you may want to review: Quadratic Equations Part A How much farther did the ball travel on the moon than it would have on earth? Express your answer to two significant figures and include the appropriate units. Hint 1. How to approach the problem Start by drawing a picture of the path of the golf ball, showing its starting and ending points. Choose a coordinate system, and label the origin. It is conventional to let x be the horizontal direction and y the vertical direction. What is the initial velocity in the x and y directions? What is the acceleration in the x and y directions on the moon and on the earth? What are the equations for and as a function of time, and , respectively? What is the y coordinate when the golf ball hits the ground? Can you use this information to determine the time of flight on the moon and on the earth? 107 m s2 m/s  x y x(t) y(t) Once you have the time of flight, how can you use the equation to determine the total distance traveled? Compare the distance traveled on the moon to the distance traveled on the earth . ANSWER: Correct Part B For how much more time was the ball in flight? Express your answer to two significant figures and include the appropriate units. Hint 1. How to approach the problem What is the equation describing as a function of time? What is the initial x component of the ball’s velocity? How are the initial x component of the ball’s velocity and the distance traveled related to the time of flight? What is the difference between the time of flight on the moon and on earth? ANSWER: Correct Problem 4.42 In the Olympic shotput event, an athlete throws the shot with an initial speed of 12 at a 40.0 angle from the horizontal. The shot leaves her hand at a height of 1.8 above the ground. x(t) L = 85 m x(t) x t = 10 s m/s  m Part A How far does the shot travel? Express your answer to four significant figures and include the appropriate units. ANSWER: Correct Part B Repeat the calculation of part (a) for angles of 42.5 , 45.0 , and 47.5 . Express your answer to four significant figures and include the appropriate units. ANSWER: Correct Part C Express your answer to four significant figures and include the appropriate units. ANSWER: Correct Part D x = 16.36 m    x(42.5 ) = 16.39 m x(45.0 ) = 16.31 m Express your answer to four significant figures and include the appropriate units. ANSWER: Correct Part E At what angle of release does she throw the farthest? ANSWER: Correct Problem 4.44 A ball is thrown toward a cliff of height with a speed of 32 and an angle of 60 above horizontal. It lands on the edge of the cliff 3.2 later. Part A How high is the cliff? Express your answer to two significant figures and include the appropriate units. ANSWER: x(47.5 ) = 16.13 m 40.0 42.5 45.0 47.5 h m/s  s h = 39 m Answer Requested Part B What was the maximum height of the ball? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part C What is the ball’s impact speed? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Problem 4.58 A typical laboratory centrifuge rotates at 3600 . Test tubes have to be placed into a centrifuge very carefully because of the very large accelerations. Part A What is the acceleration at the end of a test tube that is 10 from the axis of rotation? Express your answer with the appropriate units. hmax = 39 m v = 16 ms rpm cm ANSWER: Correct Part B For comparison, what is the magnitude of the acceleration a test tube would experience if dropped from a height of 1.0 and stopped in a 1.7-ms-long encounter with a hard floor? Express your answer with the appropriate units. ANSWER: Correct Problem 4.62 Communications satellites are placed in a circular orbit where they stay directly over a fixed point on the equator as the earth rotates. These are called geosynchronous orbits. The radius of the earth is , and the altitude of a geosynchronous orbit is ( 22000 miles). Part A What is the speed of a satellite in a geosynchronous orbit? Express your answer with the appropriate units. ANSWER: Correct a = 1.42×104 m s2 m a = 2610 m s2 6.37 × 106m 3.58 × 107m  v = 3070 ms Part B What is the magnitude of the acceleration of a satellite in a geosynchronous orbit? Express your answer with the appropriate units. ANSWER: Correct Score Summary: Your score on this assignment is 89.5%. You received 103.82 out of a possible total of 116 points. a = 0.223 m s2

Assignment 3 Due: 11:59pm on Friday, February 14, 2014 You will receive no credit for items you complete after the assignment is due. Grading Policy Problem 2.68 As a science project, you drop a watermelon off the top of the Empire State Building, 320 m above the sidewalk. It so happens that Superman flies by at the instant you release the watermelon. Superman is headed straight down with a speed of 36.0 . Part A How fast is the watermelon going when it passes Superman? Express your answer with the appropriate units. ANSWER: Correct Problem 2.63 A motorist is driving at when she sees that a traffic light ahead has just turned red. She knows that this light stays red for , and she wants to reach the light just as it turns green again. It takes her to step on the brakes and begin slowing. Part A What is her speed as she reaches the light at the instant it turns green? Express your answer with the appropriate units. ANSWER: m/s 72.0 ms 20 m/s 200 m 15 s 1.0 s 5.71 ms Correct Conceptual Question 4.1 Part A At this instant, is the particle in the figurespeeding up, slowing down, or traveling at constant speed? ANSWER: Correct Part B Is this particle curving to the right, curving to the left, or traveling straight? Speeding up Slowing down Traveling at constant speed ANSWER: Correct Conceptual Question 4.2 Part A At this instant, is the particle in the following figure speeding up, slowing down, or traveling at constant speed? ANSWER: Curving to the right Curving to the left Traveling straight Correct Part B Is this particle curving upward, curving downward, or traveling straight? ANSWER: Correct Problem 4.8 A particle’s trajectory is described by and , where is in s. Part A What is the particle’s speed at ? ANSWER: The particle is speeding up. The particle is slowing down. The particle is traveling at constant speed. The particle is curving upward. The particle is curving downward. The particle is traveling straight. x = ( 1 −2 ) m 2 t3 t2 y = ( 1 −2t) m 2 t2 t t = 0 s v = 2 m/s Correct Part B What is the particle’s speed at ? Express your answer using two significant figures. ANSWER: Correct Part C What is the particle’s direction of motion, measured as an angle from the x-axis, at ? Express your answer using two significant figures. ANSWER: Correct Part D What is the particle’s direction of motion, measured as an angle from the x-axis, at ? Express your answer using two significant figures. ANSWER: t = 5.0s v = 18 m/s t = 0 s  = -90  counterclockwise from the +x axis. t = 5.0s  = 9.7  counterclockwise from the +x axis. Correct Problem 4.9 A rocket-powered hockey puck moves on a horizontal frictionless table. The figure shows the graph of and the figure shows the graph of , the x- and y-components of the puck’s velocity, respectively. The puck starts at the origin. Part A In which direction is the puck moving at = 3 ? Give your answer as an angle from the x-axis. Express your answer using two significant figures. ANSWER: Correct Part B vx vy t s = 51   above the x-axis How far from the origin is the puck at 5 ? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Enhanced EOC: Problem 4.13 A rifle is aimed horizontally at a target 51.0 away. The bullet hits the target 1.50 below the aim point. You may want to review ( pages 91 – 95) . For help with math skills, you may want to review: Quadratic Equations Part A What was the bullet’s flight time? Express your answer with the appropriate units. Hint 1. How to approach the problem Start by drawing a picture of the bullet’s trajectory, including where it leaves the gun and where it hits the target. You can assume that the gun was held parallel to the ground. Label the distances given in the problem. Choose an x-y coordinate system, making sure to label the origin. It is conventional to have x in the horizontal direction and y in the vertical direction. What is the y coordinate when the bullet leaves the gun? What is the y coordinate when it hits the target? What is the initial velocity in the y direction? What is the acceleration in the y direction? What is the equation that describes the motion in the vertical y direction as a function of time? Can you use the equation for to determine the time of flight? Why was it not necessary to include the motion in the x direction? s s = 180 cm m cm y(t) y(t) ANSWER: Correct Part B What was the bullet’s speed as it left the barrel? Express your answer with the appropriate units. Hint 1. How to approach the problem In the coordinate system introduced in Part A, what are the x coordinates when the bullet leaves the gun and when it hits the target? Is there any acceleration in the x direction? What is the equation that describes the motion in the horizontal x direction as a function of time? Can you use the equation for to determine the initial velocity? ANSWER: Correct Introduction to Projectile Motion Learning Goal: To understand the basic concepts of projectile motion. Projectile motion may seem rather complex at first. However, by breaking it down into components, you will find that it is really no different than the one-dimensional motions that you have already studied. One of the most often used techniques in physics is to divide two- and three-dimensional quantities into components. For instance, in projectile motion, a particle has some initial velocity . In general, this velocity can point in any direction on the xy plane and can have any magnitude. To make a problem more managable, it is common to break up such a quantity into its x component and its y component . 5.53×10−2 s x(t) x(t) 922 ms v vx vy Consider a particle with initial velocity that has magnitude 12.0 and is directed 60.0 above the negative x axis. Part A What is the x component of ? Express your answer in meters per second. ANSWER: Correct Part B What is the y component of ? Express your answer in meters per second. ANSWER: Correct Breaking up the velocities into components is particularly useful when the components do not affect each other. Eventually, you will learn about situations in which the components of velocity do affect one another, but for now you will only be looking at problems where they do not. So, if there is acceleration in the x direction but not in the y direction, then the x component of the velocity will change, but the y component of the velocity will not. Part C Look at this applet. The motion diagram for a projectile is displayed, as are the motion diagrams for each component. The x-component motion diagram is what you would get if you shined a spotlight down on the particle as it moved and recorded the motion of its shadow. Similarly, if you shined a spotlight to the left and recorded the particle’s shadow, you would get the motion diagram for its y component. How would you describe the two motion diagrams for the components? ANSWER: v m/s degrees vx v vx = -6.00 m/s vy v vy = 10.4 m/s Correct As you can see, the two components of the motion obey their own independent kinematic laws. For the vertical component, there is an acceleration downward with magnitude . Thus, you can calculate the vertical position of the particle at any time using the standard kinematic equation . Similarly, there is no acceleration in the horizontal direction, so the horizontal position of the particle is given by the standard kinematic equation . Now, consider this applet. Two balls are simultaneously dropped from a height of 5.0 . Part D How long does it take for the balls to reach the ground? Use 10 for the magnitude of the acceleration due to gravity. Express your answer in seconds to two significant figures. Hint 1. How to approach the problem The balls are released from rest at a height of 5.0 at time . Using these numbers and basic kinematics, you can determine the amount of time it takes for the balls to reach the ground. ANSWER: Correct This situation, which you have dealt with before (motion under the constant acceleration of gravity), is actually a special case of projectile motion. Think of this as projectile motion where the horizontal component of the initial velocity is zero. Both the vertical and horizontal components exhibit motion with constant nonzero acceleration. The vertical component exhibits motion with constant nonzero acceleration, whereas the horizontal component exhibits constant-velocity motion. The vertical component exhibits constant-velocity motion, whereas the horizontal component exhibits motion with constant nonzero acceleration. Both the vertical and horizontal components exhibit motion with constant velocity. g = 10 m/s2 y = y0 + v0 t + (1/2)at2 x = x0 + v0 t m tg m/s2 m t = 0 s tg = 1.0 s Part E Imagine the ball on the left is given a nonzero initial speed in the horizontal direction, while the ball on the right continues to fall with zero initial velocity. What horizontal speed must the ball on the left start with so that it hits the ground at the same position as the ball on the right? Remember that the two balls are released, starting a horizontal distance of 3.0 apart. Express your answer in meters per second to two significant figures. Hint 1. How to approach the problem Recall from Part B that the horizontal component of velocity does not change during projectile motion. Therefore, you need to find the horizontal component of velocity such that, in a time , the ball will move horizontally 3.0 . You can assume that its initial x coordinate is . ANSWER: Correct You can adjust the horizontal speeds in this applet. Notice that regardless of what horizontal speeds you give to the balls, they continue to move vertically in the same way (i.e., they are at the same y coordinate at the same time). Problem 4.12 A ball thrown horizontally at 27 travels a horizontal distance of 49 before hitting the ground. Part A From what height was the ball thrown? Express your answer using two significant figures with the appropriate units. ANSWER: vx m vx tg = 1.0 s m x0 = 0.0 m vx = 3.0 m/s m/s m h = 16 m Correct Enhanced EOC: Problem 4.20 The figure shows the angular-velocity-versus-time graph for a particle moving in a circle. You may want to review ( page ) . For help with math skills, you may want to review: The Definite Integral Part A How many revolutions does the object make during the first 3.5 ? Express your answer using two significant figures. You did not open hints for this part. ANSWER: s n = Incorrect; Try Again Problem 4.26 To withstand “g-forces” of up to 10 g’s, caused by suddenly pulling out of a steep dive, fighter jet pilots train on a “human centrifuge.” 10 g’s is an acceleration of . Part A If the length of the centrifuge arm is 10.0 , at what speed is the rider moving when she experiences 10 g’s? Express your answer with the appropriate units. ANSWER: Correct Problem 4.28 Your roommate is working on his bicycle and has the bike upside down. He spins the 60.0 -diameter wheel, and you notice that a pebble stuck in the tread goes by three times every second. Part A What is the pebble’s speed? Express your answer with the appropriate units. ANSWER: Correct 98 m/s2 m 31.3 ms cm 5.65 ms Part B What is the pebble’s acceleration? Express your answer with the appropriate units. ANSWER: Correct Enhanced EOC: Problem 4.43 On the Apollo 14 mission to the moon, astronaut Alan Shepard hit a golf ball with a 6 iron. The acceleration due to gravity on the moon is 1/6 of its value on earth. Suppose he hits the ball with a speed of 13 at an angle 50 above the horizontal. You may want to review ( pages 90 – 95) . For help with math skills, you may want to review: Quadratic Equations Part A How much farther did the ball travel on the moon than it would have on earth? Express your answer to two significant figures and include the appropriate units. Hint 1. How to approach the problem Start by drawing a picture of the path of the golf ball, showing its starting and ending points. Choose a coordinate system, and label the origin. It is conventional to let x be the horizontal direction and y the vertical direction. What is the initial velocity in the x and y directions? What is the acceleration in the x and y directions on the moon and on the earth? What are the equations for and as a function of time, and , respectively? What is the y coordinate when the golf ball hits the ground? Can you use this information to determine the time of flight on the moon and on the earth? 107 m s2 m/s  x y x(t) y(t) Once you have the time of flight, how can you use the equation to determine the total distance traveled? Compare the distance traveled on the moon to the distance traveled on the earth . ANSWER: Correct Part B For how much more time was the ball in flight? Express your answer to two significant figures and include the appropriate units. Hint 1. How to approach the problem What is the equation describing as a function of time? What is the initial x component of the ball’s velocity? How are the initial x component of the ball’s velocity and the distance traveled related to the time of flight? What is the difference between the time of flight on the moon and on earth? ANSWER: Correct Problem 4.42 In the Olympic shotput event, an athlete throws the shot with an initial speed of 12 at a 40.0 angle from the horizontal. The shot leaves her hand at a height of 1.8 above the ground. x(t) L = 85 m x(t) x t = 10 s m/s  m Part A How far does the shot travel? Express your answer to four significant figures and include the appropriate units. ANSWER: Correct Part B Repeat the calculation of part (a) for angles of 42.5 , 45.0 , and 47.5 . Express your answer to four significant figures and include the appropriate units. ANSWER: Correct Part C Express your answer to four significant figures and include the appropriate units. ANSWER: Correct Part D x = 16.36 m    x(42.5 ) = 16.39 m x(45.0 ) = 16.31 m Express your answer to four significant figures and include the appropriate units. ANSWER: Correct Part E At what angle of release does she throw the farthest? ANSWER: Correct Problem 4.44 A ball is thrown toward a cliff of height with a speed of 32 and an angle of 60 above horizontal. It lands on the edge of the cliff 3.2 later. Part A How high is the cliff? Express your answer to two significant figures and include the appropriate units. ANSWER: x(47.5 ) = 16.13 m 40.0 42.5 45.0 47.5 h m/s  s h = 39 m Answer Requested Part B What was the maximum height of the ball? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part C What is the ball’s impact speed? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Problem 4.58 A typical laboratory centrifuge rotates at 3600 . Test tubes have to be placed into a centrifuge very carefully because of the very large accelerations. Part A What is the acceleration at the end of a test tube that is 10 from the axis of rotation? Express your answer with the appropriate units. hmax = 39 m v = 16 ms rpm cm ANSWER: Correct Part B For comparison, what is the magnitude of the acceleration a test tube would experience if dropped from a height of 1.0 and stopped in a 1.7-ms-long encounter with a hard floor? Express your answer with the appropriate units. ANSWER: Correct Problem 4.62 Communications satellites are placed in a circular orbit where they stay directly over a fixed point on the equator as the earth rotates. These are called geosynchronous orbits. The radius of the earth is , and the altitude of a geosynchronous orbit is ( 22000 miles). Part A What is the speed of a satellite in a geosynchronous orbit? Express your answer with the appropriate units. ANSWER: Correct a = 1.42×104 m s2 m a = 2610 m s2 6.37 × 106m 3.58 × 107m  v = 3070 ms Part B What is the magnitude of the acceleration of a satellite in a geosynchronous orbit? Express your answer with the appropriate units. ANSWER: Correct Score Summary: Your score on this assignment is 89.5%. You received 103.82 out of a possible total of 116 points. a = 0.223 m s2

please email info@checkyourstudy.com
Chapter 04 Homework Due: 11:59pm on Friday, May 23, 2014 You will receive no credit for items you complete after the assignment is due. Grading Policy Activity: Investigating Survivorship Curves Click here to complete this activity. Then answer the questions. Part A Which of these species typically has a mortality rate that remains fairly constant over an individual’s life span? ANSWER: Correct The mortality rate of robins remains relatively constant throughout their life span. Part B Oyster populations are primarily, if not exclusively, composed of _____. ANSWER: Correct Young oysters have a very high mortality rate; older oysters have a much lower mortality rate. Thus, most oyster populations consist primarily of older individuals. Part C Which of these organisms has a survivorship curve similar to that of oysters? ANSWER: grasses oysters elephants robins humans juveniles adults prereproductive oysters larval and juvenile oysters larvae Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 1 of 13 5/21/2014 7:59 PM Correct Grasses, like oysters, have a relatively high mortality rate early in their life span, after which the mortality rate decreases. Part D Which of these organisms has a survivorship curve similar to that of humans? ANSWER: Correct The mortality rate of elephants, like that of humans, remains relatively low for much of their life span and then dramatically increases for older individuals. BioFlix Quiz: Population Ecology Watch the animation at left before answering the questions below. cats robins elephants grasses humans cats oysters grasses robins elephants Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 2 of 13 5/21/2014 7:59 PM Part A An ideal habitat with unlimited resources is associated with Hint 1. Review the animation or your Study Sheet for Population Ecology ANSWER: Correct Populations grow exponentially with unlimited resources. Part B The maximum population a habitat can support is its Hint 1. Review the animation or your Study Sheet for Population Ecology ANSWER: Correct Part C Logistic growth involves Hint 1. Review the animation or your Study Sheet for Population Ecology ANSWER: Both exponential growth and logistic growth. Population crashes. Exponential growth. Logistic growth. Neither exponential growth nor logistic growth. Logistic growth. Death rate. Birth rate. Carrying capacity. Exponential growth. A population crash. Population growth continuing forever. Population growth reaching carrying capacity and then speeding up. Population size decreasing to zero. Population growth slowing down as the population approaches carrying capacity. Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 3 of 13 5/21/2014 7:59 PM Correct Part D In exponential growth Hint 1. Review the animation or your Study Sheet for Population Ecology ANSWER: Correct Part E Which of the following would NOT cause population size to decrease? Hint 1. Review the animation. ANSWER: Correct An increased birth rate would cause population size to increase. BioFlix Activity: Photosynthesis — Inputs and Outputs Can you fill in the photosynthesis equation? To review photosynthesis, watch this BioFlix animation: Photosynthesis. Part A – Photosynthesis equation Drag the labels onto the equation to identify the inputs and outputs of photosynthesis. ANSWER: Population size grows more and more slowly as the population gets bigger. Population size grows faster and faster as the population gets bigger. Population size stays constant. Population growth slows as the population gets close to its carrying capacity. None of these are correct. Increased death rate A exponentially growing population outgrowing its food supply and crashing Poor weather, resulting in less food being available Increase in the number of predators Increased birth rate Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 4 of 13 5/21/2014 7:59 PM BioFlix Activity: Cellular Respiration and Photosynthesis — Energy Flow Can you identify how energy flows through an ecosystem? To review energy flow in cellular respiration and photosynthesis, watch these BioFlix animations: Cellular Respiration and Photosynthesis. Part A – Energy flow through an ecosystem Drag the labels onto the diagram to identify how energy flows through an ecosystem. ANSWER: BioFlix Activity: Cellular Respiration and Photosynthesis — Chemical Cycling Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 5 of 13 5/21/2014 7:59 PM Can you identify how chemicals cycle in an ecosystem? To review the chemical inputs and outputs of cellular respiration and photosynthesis, watch these BioFlix animations: Cellular Respiration and Photosynthesis. Part A – Chemical cycling in an ecosystem Drag the labels onto the diagram to identify how chemicals cycle in an ecosystem. ANSWER: BioFlix Activity: Cellular Respiration — Inputs and Outputs Can you fill in the cellular respiration equation? To review cellular respiration, watch this BioFlix animation: Cellular Respiration. Part A – Cellular respiration equation Drag the labels onto the equation to identify the inputs and outputs of cellular respiration. ANSWER: Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 6 of 13 5/21/2014 7:59 PM BioFlix Activity: Population Ecology — Types of Population Growth Can you identify the different ways in which populations grow? To review types of population growth, watch this BioFlix animation: Population Ecology. Part A – Types of population growth Drag the correct label under each graph to identify the type of population growth shown. ANSWER: Concept Review: Calculating Doubling Time Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 7 of 13 5/21/2014 7:59 PM Can you calculate doubling times and growth rates for exponentially growing populations? Remember that the doubling time (in years) for an exponentially growing population is estimated by dividing 70 by the growth rate of the population (as a percentage): Doubling time (in years) = 70 / annual growth rate (%) Part A Drag the values on the left to the appropriate blanks on the right to complete the sentences. Not all values will be used. ANSWER: Concept Review: Calculating Population Growth Rates Populations grow larger from births and immigration and grow smaller from deaths and emigration. The growth rate for a population is determined by adding the birth rate and the immigration rate, and then subtracting the death rate and the emigration rate (all rates expressed as the number per 1,000 individuals per year): (birth rate + immigration rate) (death rate + emigration rate) = growth rate Positive population growth rates lead to population increases, and negative population growth rates lead to population declines. Part A Suppose you are studying a population with the following characteristics: Birth rate = 14 per 1,000/year Death rate = 6 per 1,000/year Immigration rate = 5 per 1,000/year Emigration rate = 1 per 1,000/year What is the growth rate for this population? ANSWER: Part B Suppose you are studying a population with the following characteristics: 4 per 1,000/year 12 per 1,000/year 14 per 1,000/year 26 per 1,000/year Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 8 of 13 5/21/2014 7:59 PM Birth rate = 11 per 1,000/year Death rate = 10 per 1,000/year Immigration rate = 4 per 1,000/year Emigration rate = 3 per 1,000/year What is the growth rate for this population? ANSWER: Part C Suppose you are studying a population with the following characteristics: Birth rate = 10 per 1,000/year Death rate = 12 per 1,000/year Immigration rate = 2 per 1,000/year Emigration rate = 3 per 1,000/year What is the growth rate for this population? ANSWER: Part D This question will be shown after you complete previous question(s). Part E This question will be shown after you complete previous question(s). Part F This question will be shown after you complete previous question(s). Concept Review: Levels of Ecological Organization Can you identify the example that corresponds to each level of ecological organization? Part A Drag the labels to the appropriate targets in the table. ANSWER: 0 per 1,000/year 2 per 1,000/year 14 per 1,000/year 28 per 1,000/year 3 per 1,000/year 1 per 1,000/year 17 per 1,000/year 27 per 1,000/year Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 9 of 13 5/21/2014 7:59 PM BioFlix Activity: Mechanisms of Evolution — Natural Selection: Pesticides Can you identify the process by which natural selection acts on an insect population exposed to pesticides? To review the process of natural selection, watch this BioFlix animation: Mechanisms of Evolution: Natural Selection. Part A – Natural selection: Pesticides Drag the labels onto the flowchart to place them in the correct sequence. ANSWER: Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 10 of 13 5/21/2014 7:59 PM ABC News Video: Protecting the Galapagos Islands Watch the ABC News video (2:07 minutes). Then answer the questions below. Part A Where are the Galapagos Islands located? ANSWER: Part B Which of the following sets of animals are likely to be found on the Galapagos Islands? ANSWER: near the tip of South Africa northeast of Australia along the Great Barrier Reef 600 miles west of Ecuador, near the equator in the Mediterranean Sea, as part of the Greek Islands frogs, lungfish, mountain goats tortoises, finches, blue-footed boobies ostriches, cougars, porcupines beaver, snakes, armadillos Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 11 of 13 5/21/2014 7:59 PM Part C Which species is threatening the natural wildlife on the Galapagos Islands? ANSWER: Part D The Galapagos Islands were the first place on Earth to _____. ANSWER: Part E Tourism on the Galapagos Islands is being restricted by requiring tourists to _____. ANSWER: Current Events: A Surplus Washington Could Do Without: A Capital Park’s Rapacious Deer (New York Times, 2/28/2012) Read this New York Times article and then answer the questions. A Surplus Washington Could Do Without: A Capital Park’s Rapacious Deer (2/28/2012) Registration with The New York Times provides instant access to breaking news on NYTimes.com. To register, go to http://www.nytimes.com/register. Visit http://www.nytimes.com/content/help/rights/terms/terms-of-service.html to review the current NYT Terms of Service. Part A Which of the following is true? ANSWER: Part B What predator currently feeds on deer in Rock Creek Park? humans zebra mussels Asian carp mountain lions suffer the complete extinction of all native species be declared off-limits to all humans be declared a world heritage site be invaded by human-introduced species visit each island in groups of only ten individuals at a time view the islands only from the water be escorted by trained guides at all times stay at least 100 feet away from all animals on the islands Deer have always been a problem in Rock Creek Park. Deer are not a problem in Rock Creek Park. Deer are not native to Rock Creek Park, and have been a problem since they were introduced in 1952. Deer were once absent from Rock Creek Park, and have only become a problem in the last 20 years. Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 12 of 13 5/21/2014 7:59 PM ANSWER: Part C Why isn’t the deer population controlled by hunting in Rock Creek Park? ANSWER: Part D It is hoped that the deer herd can be reduced by how much? ANSWER: Part E Which of the following is true? ANSWER: Part F Because the park is changing in response to the increasing deer population, this is an example of ______________. ANSWER: Score Summary: Your score on this assignment is 21.2%. You received 9.1 out of a possible total of 43 points. There are no predators of deer in Rock Creek Park. mountain lion coyote wolf Hunting has been attempted in the park, but the trees are too thick. Hunting is prohibited in the park. There is no public interest in hunting in the park. Deer are a protected species. one-quarter one-half three-quarters the entire herd Animals cannot be killed on federally managed public lands. Only Congress can decide to have animals killed on federally managed public lands. The federal agency in charge of management of the land in question decides if animals should be killed. Only the National Park Service can decide to have animals killed on federally managed public lands. succession artificial selection recession progression Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 13 of 13 5/21/2014 7:59 PM

Chapter 04 Homework Due: 11:59pm on Friday, May 23, 2014 You will receive no credit for items you complete after the assignment is due. Grading Policy Activity: Investigating Survivorship Curves Click here to complete this activity. Then answer the questions. Part A Which of these species typically has a mortality rate that remains fairly constant over an individual’s life span? ANSWER: Correct The mortality rate of robins remains relatively constant throughout their life span. Part B Oyster populations are primarily, if not exclusively, composed of _____. ANSWER: Correct Young oysters have a very high mortality rate; older oysters have a much lower mortality rate. Thus, most oyster populations consist primarily of older individuals. Part C Which of these organisms has a survivorship curve similar to that of oysters? ANSWER: grasses oysters elephants robins humans juveniles adults prereproductive oysters larval and juvenile oysters larvae Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 1 of 13 5/21/2014 7:59 PM Correct Grasses, like oysters, have a relatively high mortality rate early in their life span, after which the mortality rate decreases. Part D Which of these organisms has a survivorship curve similar to that of humans? ANSWER: Correct The mortality rate of elephants, like that of humans, remains relatively low for much of their life span and then dramatically increases for older individuals. BioFlix Quiz: Population Ecology Watch the animation at left before answering the questions below. cats robins elephants grasses humans cats oysters grasses robins elephants Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 2 of 13 5/21/2014 7:59 PM Part A An ideal habitat with unlimited resources is associated with Hint 1. Review the animation or your Study Sheet for Population Ecology ANSWER: Correct Populations grow exponentially with unlimited resources. Part B The maximum population a habitat can support is its Hint 1. Review the animation or your Study Sheet for Population Ecology ANSWER: Correct Part C Logistic growth involves Hint 1. Review the animation or your Study Sheet for Population Ecology ANSWER: Both exponential growth and logistic growth. Population crashes. Exponential growth. Logistic growth. Neither exponential growth nor logistic growth. Logistic growth. Death rate. Birth rate. Carrying capacity. Exponential growth. A population crash. Population growth continuing forever. Population growth reaching carrying capacity and then speeding up. Population size decreasing to zero. Population growth slowing down as the population approaches carrying capacity. Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 3 of 13 5/21/2014 7:59 PM Correct Part D In exponential growth Hint 1. Review the animation or your Study Sheet for Population Ecology ANSWER: Correct Part E Which of the following would NOT cause population size to decrease? Hint 1. Review the animation. ANSWER: Correct An increased birth rate would cause population size to increase. BioFlix Activity: Photosynthesis — Inputs and Outputs Can you fill in the photosynthesis equation? To review photosynthesis, watch this BioFlix animation: Photosynthesis. Part A – Photosynthesis equation Drag the labels onto the equation to identify the inputs and outputs of photosynthesis. ANSWER: Population size grows more and more slowly as the population gets bigger. Population size grows faster and faster as the population gets bigger. Population size stays constant. Population growth slows as the population gets close to its carrying capacity. None of these are correct. Increased death rate A exponentially growing population outgrowing its food supply and crashing Poor weather, resulting in less food being available Increase in the number of predators Increased birth rate Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 4 of 13 5/21/2014 7:59 PM BioFlix Activity: Cellular Respiration and Photosynthesis — Energy Flow Can you identify how energy flows through an ecosystem? To review energy flow in cellular respiration and photosynthesis, watch these BioFlix animations: Cellular Respiration and Photosynthesis. Part A – Energy flow through an ecosystem Drag the labels onto the diagram to identify how energy flows through an ecosystem. ANSWER: BioFlix Activity: Cellular Respiration and Photosynthesis — Chemical Cycling Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 5 of 13 5/21/2014 7:59 PM Can you identify how chemicals cycle in an ecosystem? To review the chemical inputs and outputs of cellular respiration and photosynthesis, watch these BioFlix animations: Cellular Respiration and Photosynthesis. Part A – Chemical cycling in an ecosystem Drag the labels onto the diagram to identify how chemicals cycle in an ecosystem. ANSWER: BioFlix Activity: Cellular Respiration — Inputs and Outputs Can you fill in the cellular respiration equation? To review cellular respiration, watch this BioFlix animation: Cellular Respiration. Part A – Cellular respiration equation Drag the labels onto the equation to identify the inputs and outputs of cellular respiration. ANSWER: Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 6 of 13 5/21/2014 7:59 PM BioFlix Activity: Population Ecology — Types of Population Growth Can you identify the different ways in which populations grow? To review types of population growth, watch this BioFlix animation: Population Ecology. Part A – Types of population growth Drag the correct label under each graph to identify the type of population growth shown. ANSWER: Concept Review: Calculating Doubling Time Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 7 of 13 5/21/2014 7:59 PM Can you calculate doubling times and growth rates for exponentially growing populations? Remember that the doubling time (in years) for an exponentially growing population is estimated by dividing 70 by the growth rate of the population (as a percentage): Doubling time (in years) = 70 / annual growth rate (%) Part A Drag the values on the left to the appropriate blanks on the right to complete the sentences. Not all values will be used. ANSWER: Concept Review: Calculating Population Growth Rates Populations grow larger from births and immigration and grow smaller from deaths and emigration. The growth rate for a population is determined by adding the birth rate and the immigration rate, and then subtracting the death rate and the emigration rate (all rates expressed as the number per 1,000 individuals per year): (birth rate + immigration rate) (death rate + emigration rate) = growth rate Positive population growth rates lead to population increases, and negative population growth rates lead to population declines. Part A Suppose you are studying a population with the following characteristics: Birth rate = 14 per 1,000/year Death rate = 6 per 1,000/year Immigration rate = 5 per 1,000/year Emigration rate = 1 per 1,000/year What is the growth rate for this population? ANSWER: Part B Suppose you are studying a population with the following characteristics: 4 per 1,000/year 12 per 1,000/year 14 per 1,000/year 26 per 1,000/year Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 8 of 13 5/21/2014 7:59 PM Birth rate = 11 per 1,000/year Death rate = 10 per 1,000/year Immigration rate = 4 per 1,000/year Emigration rate = 3 per 1,000/year What is the growth rate for this population? ANSWER: Part C Suppose you are studying a population with the following characteristics: Birth rate = 10 per 1,000/year Death rate = 12 per 1,000/year Immigration rate = 2 per 1,000/year Emigration rate = 3 per 1,000/year What is the growth rate for this population? ANSWER: Part D This question will be shown after you complete previous question(s). Part E This question will be shown after you complete previous question(s). Part F This question will be shown after you complete previous question(s). Concept Review: Levels of Ecological Organization Can you identify the example that corresponds to each level of ecological organization? Part A Drag the labels to the appropriate targets in the table. ANSWER: 0 per 1,000/year 2 per 1,000/year 14 per 1,000/year 28 per 1,000/year 3 per 1,000/year 1 per 1,000/year 17 per 1,000/year 27 per 1,000/year Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 9 of 13 5/21/2014 7:59 PM BioFlix Activity: Mechanisms of Evolution — Natural Selection: Pesticides Can you identify the process by which natural selection acts on an insect population exposed to pesticides? To review the process of natural selection, watch this BioFlix animation: Mechanisms of Evolution: Natural Selection. Part A – Natural selection: Pesticides Drag the labels onto the flowchart to place them in the correct sequence. ANSWER: Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 10 of 13 5/21/2014 7:59 PM ABC News Video: Protecting the Galapagos Islands Watch the ABC News video (2:07 minutes). Then answer the questions below. Part A Where are the Galapagos Islands located? ANSWER: Part B Which of the following sets of animals are likely to be found on the Galapagos Islands? ANSWER: near the tip of South Africa northeast of Australia along the Great Barrier Reef 600 miles west of Ecuador, near the equator in the Mediterranean Sea, as part of the Greek Islands frogs, lungfish, mountain goats tortoises, finches, blue-footed boobies ostriches, cougars, porcupines beaver, snakes, armadillos Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 11 of 13 5/21/2014 7:59 PM Part C Which species is threatening the natural wildlife on the Galapagos Islands? ANSWER: Part D The Galapagos Islands were the first place on Earth to _____. ANSWER: Part E Tourism on the Galapagos Islands is being restricted by requiring tourists to _____. ANSWER: Current Events: A Surplus Washington Could Do Without: A Capital Park’s Rapacious Deer (New York Times, 2/28/2012) Read this New York Times article and then answer the questions. A Surplus Washington Could Do Without: A Capital Park’s Rapacious Deer (2/28/2012) Registration with The New York Times provides instant access to breaking news on NYTimes.com. To register, go to http://www.nytimes.com/register. Visit http://www.nytimes.com/content/help/rights/terms/terms-of-service.html to review the current NYT Terms of Service. Part A Which of the following is true? ANSWER: Part B What predator currently feeds on deer in Rock Creek Park? humans zebra mussels Asian carp mountain lions suffer the complete extinction of all native species be declared off-limits to all humans be declared a world heritage site be invaded by human-introduced species visit each island in groups of only ten individuals at a time view the islands only from the water be escorted by trained guides at all times stay at least 100 feet away from all animals on the islands Deer have always been a problem in Rock Creek Park. Deer are not a problem in Rock Creek Park. Deer are not native to Rock Creek Park, and have been a problem since they were introduced in 1952. Deer were once absent from Rock Creek Park, and have only become a problem in the last 20 years. Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 12 of 13 5/21/2014 7:59 PM ANSWER: Part C Why isn’t the deer population controlled by hunting in Rock Creek Park? ANSWER: Part D It is hoped that the deer herd can be reduced by how much? ANSWER: Part E Which of the following is true? ANSWER: Part F Because the park is changing in response to the increasing deer population, this is an example of ______________. ANSWER: Score Summary: Your score on this assignment is 21.2%. You received 9.1 out of a possible total of 43 points. There are no predators of deer in Rock Creek Park. mountain lion coyote wolf Hunting has been attempted in the park, but the trees are too thick. Hunting is prohibited in the park. There is no public interest in hunting in the park. Deer are a protected species. one-quarter one-half three-quarters the entire herd Animals cannot be killed on federally managed public lands. Only Congress can decide to have animals killed on federally managed public lands. The federal agency in charge of management of the land in question decides if animals should be killed. Only the National Park Service can decide to have animals killed on federally managed public lands. succession artificial selection recession progression Chapter 04 Homework http://session.masteringenvironmentalscience.com/myct/assignmentPrintV… 13 of 13 5/21/2014 7:59 PM

info@checkyourstudy.com
Sex, Gender, and Popular Culture Spring 2015 Look through popular magazines, and see if you can find advertisements that objectify women in order to sell a product. Alternately, you may use an advertisement on television (but make sure to provide a link to the ad so I can see it!). Study these images then write a paper about objectification that deals with all or some of the following: • What effect(s), if any, do you think the objectification of women’s bodies has on our culture? • Jean Kilbourne states “turning a human being into a thing is almost always the first step toward justifying violence against that person.” What do you think she means by this? Do you agree with her reasoning? Why or why not? • Some people would argue that depicting a woman’s body as an object is a form of art. What is your opinion of this point of view? Explain your reasoning. • Why do you think that women are objectified more often than men are? • How does sexualization and objectification play out differently across racial lines? • Kilbourne explains that the consequences of being objectified are different – and more serious – for women than for men. Do you agree? How is the world different for women than it is for men? How do objectified images of women interact with those in our culture differently from the way images of men do? Why is it important to look at images in the context of the culture? • What is the difference between sexual objectification and sexual subjectification? (Ros Gill ) • How do ads construct violent white masculinity and how does that vision of masculinity hurt both men and women? Throughout your written analysis, be sure to make clear and specific reference to the images you selected, and please submit these images with your paper. Make sure you engage with and reference to at least 4 of the following authors: Kilbourne, Bordo, Hunter & Soto, Rose, Durham, Gill, Katz, Schuchardt, Ono and Buescher. Guidelines:  Keep your content focused on structural, systemic, institutional factors rather than the individual: BE ANALYTICAL NOT ANECDOTAL.  Avoid using the first person or including personal stories/reactions. You must make sure to actively engage with your readings: these essays need to be informed and framed by the theoretical material you have been reading this semester.  Keep within the 4-6 page limit; use 12-point font, double spacing and 1-inch margins.  Use formal writing conventions (introduction/thesis statement, body, conclusion) and correct grammar. Resources may be cited within the text of your paper, i.e. (Walters, 2013).

Sex, Gender, and Popular Culture Spring 2015 Look through popular magazines, and see if you can find advertisements that objectify women in order to sell a product. Alternately, you may use an advertisement on television (but make sure to provide a link to the ad so I can see it!). Study these images then write a paper about objectification that deals with all or some of the following: • What effect(s), if any, do you think the objectification of women’s bodies has on our culture? • Jean Kilbourne states “turning a human being into a thing is almost always the first step toward justifying violence against that person.” What do you think she means by this? Do you agree with her reasoning? Why or why not? • Some people would argue that depicting a woman’s body as an object is a form of art. What is your opinion of this point of view? Explain your reasoning. • Why do you think that women are objectified more often than men are? • How does sexualization and objectification play out differently across racial lines? • Kilbourne explains that the consequences of being objectified are different – and more serious – for women than for men. Do you agree? How is the world different for women than it is for men? How do objectified images of women interact with those in our culture differently from the way images of men do? Why is it important to look at images in the context of the culture? • What is the difference between sexual objectification and sexual subjectification? (Ros Gill ) • How do ads construct violent white masculinity and how does that vision of masculinity hurt both men and women? Throughout your written analysis, be sure to make clear and specific reference to the images you selected, and please submit these images with your paper. Make sure you engage with and reference to at least 4 of the following authors: Kilbourne, Bordo, Hunter & Soto, Rose, Durham, Gill, Katz, Schuchardt, Ono and Buescher. Guidelines:  Keep your content focused on structural, systemic, institutional factors rather than the individual: BE ANALYTICAL NOT ANECDOTAL.  Avoid using the first person or including personal stories/reactions. You must make sure to actively engage with your readings: these essays need to be informed and framed by the theoretical material you have been reading this semester.  Keep within the 4-6 page limit; use 12-point font, double spacing and 1-inch margins.  Use formal writing conventions (introduction/thesis statement, body, conclusion) and correct grammar. Resources may be cited within the text of your paper, i.e. (Walters, 2013).

The objectification of women has been a very controversial topic … Read More...
Explain the significant impact this career development experience has had and will continue to have on your life.

Explain the significant impact this career development experience has had and will continue to have on your life.

Most corporate individuals instinctively comprehend the connection between well-designed creativities … Read More...
AUCS 340: Ethics in the Professions Individual Written Assignment #1 Medical Ethics: Historical names, dates and ethical theories assignment As you read chapters 1 and 2 in the “Ethics and Basic Law for Medical Imaging Professionals” textbook you will be responsible for identifying and explaining each of the following items from the list below. You will respond in paragraph format with correct spelling and grammar expected for each paragraph. Feel free to have more than one paragraph for each item, although in most instances a single paragraph response is sufficient. If you reference material in addition to what is available in the textbook it must be appropriately cited in your work using either APA or MLA including a references cited page. The use of Wikipedia.com is not a recognized peer reviewed source so please do not use that as a reference. When responding about individuals it is necessary to indicate a year or time period that the person discussed/developed their particular ethical theory so that you can look at and appreciate the historical background to the development of ethical theories and decision making. Respond to the following sixteen items. (They are in random order from your reading) 1. Francis Bacon 2. Isaac Newton 3. Prima Facie Duties – Why do they exist? LIST AND DEFINE ALL TERMS 4. Hippocrates 5. W.D. Ross – what do the initials stand for in his name and what was his contribution to the study of ethics? 6. Microallocation – define the term and provide an example separate from the book example (You should develop your own example rather than looking for an online example; this will use your critical thinking skills. Consider an application to your own profession as microallocation is NOT limited to the medical field.) 7. Deontology – Discuss at length the basic types/concepts of this theory 8. Thomas Aquinas – 1) Discuss the ethical theory developed by Aquinas, 2) his religious affiliation, 3) why that was so important to his ethical premise and 4) discuss the type of ethical issues resolved to this day using this theory. 9. Macroallocation – define and provide an example separate from the book example (You should develop your own example rather than looking for an online example; this will use your critical thinking skills. Consider an application to your own profession as macroallocation is NOT limited to the medical field.) 10. David Hume 11. Rodericus Castro 12. Plato and “The Republic” 13. Pythagoras 14. Teleology – Discuss at length the basic types/concepts of this theory 15. Core Values – Why do they exist? LIST AND DEFINE ALL TERMS 16. Develop a timeline that reflects the ethical theories as developed by the INDIVIDUALS presented in this assignment. This assignment is due Saturday March 14th at NOON and is graded as a homework assignment. Grading: Paragraph Formation = 20% of grade (bulleted lists are acceptable for some answers) Answers inclusive of major material for answer = 40% of grade Creation of Timeline = 10% of grade Sentence structure, application of correct spelling and grammar = 20% of grade References (if utilized) = 10% of grade; references should be submitted on a separate references cited page. Otherwise this 10% of the assignment grade will be considered under the sentence structure component for 30% of the grade. It is expected that the finished assignment will be two – three pages of text, double spaced, using 12 font and standard page margins.

AUCS 340: Ethics in the Professions Individual Written Assignment #1 Medical Ethics: Historical names, dates and ethical theories assignment As you read chapters 1 and 2 in the “Ethics and Basic Law for Medical Imaging Professionals” textbook you will be responsible for identifying and explaining each of the following items from the list below. You will respond in paragraph format with correct spelling and grammar expected for each paragraph. Feel free to have more than one paragraph for each item, although in most instances a single paragraph response is sufficient. If you reference material in addition to what is available in the textbook it must be appropriately cited in your work using either APA or MLA including a references cited page. The use of Wikipedia.com is not a recognized peer reviewed source so please do not use that as a reference. When responding about individuals it is necessary to indicate a year or time period that the person discussed/developed their particular ethical theory so that you can look at and appreciate the historical background to the development of ethical theories and decision making. Respond to the following sixteen items. (They are in random order from your reading) 1. Francis Bacon 2. Isaac Newton 3. Prima Facie Duties – Why do they exist? LIST AND DEFINE ALL TERMS 4. Hippocrates 5. W.D. Ross – what do the initials stand for in his name and what was his contribution to the study of ethics? 6. Microallocation – define the term and provide an example separate from the book example (You should develop your own example rather than looking for an online example; this will use your critical thinking skills. Consider an application to your own profession as microallocation is NOT limited to the medical field.) 7. Deontology – Discuss at length the basic types/concepts of this theory 8. Thomas Aquinas – 1) Discuss the ethical theory developed by Aquinas, 2) his religious affiliation, 3) why that was so important to his ethical premise and 4) discuss the type of ethical issues resolved to this day using this theory. 9. Macroallocation – define and provide an example separate from the book example (You should develop your own example rather than looking for an online example; this will use your critical thinking skills. Consider an application to your own profession as macroallocation is NOT limited to the medical field.) 10. David Hume 11. Rodericus Castro 12. Plato and “The Republic” 13. Pythagoras 14. Teleology – Discuss at length the basic types/concepts of this theory 15. Core Values – Why do they exist? LIST AND DEFINE ALL TERMS 16. Develop a timeline that reflects the ethical theories as developed by the INDIVIDUALS presented in this assignment. This assignment is due Saturday March 14th at NOON and is graded as a homework assignment. Grading: Paragraph Formation = 20% of grade (bulleted lists are acceptable for some answers) Answers inclusive of major material for answer = 40% of grade Creation of Timeline = 10% of grade Sentence structure, application of correct spelling and grammar = 20% of grade References (if utilized) = 10% of grade; references should be submitted on a separate references cited page. Otherwise this 10% of the assignment grade will be considered under the sentence structure component for 30% of the grade. It is expected that the finished assignment will be two – three pages of text, double spaced, using 12 font and standard page margins.

Francis Bacon was a 16th century ethical theorist who was … Read More...
Assignment 5 Due: 11:59pm on Wednesday, March 5, 2014 You will receive no credit for items you complete after the assignment is due. Grading Policy Conceptual Question 6.13 A hand presses down on the book in the figure. Part A Is the normal force of the table on the book larger than, smaller than, or equal to ? ANSWER: Correct mg Equal to Larger than Smaller than mg mg mg Problem 6.2 The three ropes in the figure are tied to a small, very light ring. Two of these ropes are anchored to walls at right angles with the tensions shown in the figure. Part A What is the magnitude of the tension in the third rope? Express your answer using two significant figures. ANSWER: Correct Part B What is the direction of the tension in the third rope? Express your answer using two significant figures. T  3 T3 = 94 N T  3 Typesetting math: 100% ANSWER: Correct The Normal Force When an object rests on a surface, there is always a force perpendicular to the surface; we call this the normal force, denoted by . The two questions to the right will explore the normal force. Part A A man attempts to pick up his suitcase of weight by pulling straight up on the handle. However, he is unable to lift the suitcase from the floor. Which statement about the magnitude of the normal force acting on the suitcase is true during the time that the man pulls upward on the suitcase? Hint 1. How to approach this problem First, identify the forces that act on the suitcase and draw a free-body diagram. Then use the fact that the suitcase is in equilibrium, , to examine how the forces acting on the suitcase relate to each other. Hint 2. Identify the correct free-body diagram Which of the figures represents the free-body diagram of the suitcase while the man is pulling on the handle with a force of magnitude ? = 58   below horizontal n ws n F = 0 fpull Typesetting math: 100% ANSWER: ANSWER: Correct Part B A B C D The magnitude of the normal force is equal to the magnitude of the weight of the suitcase. The magnitude of the normal force is equal to the magnitude of the weight of the suitcase minus the magnitude of the force of the pull. The magnitude of the normal force is equal to the sum of the magnitude of the force of the pull and the magnitude of the suitcase’s weight. The magnitude of the normal force is greater than the magnitude of the weight of the suitcase. Typesetting math: 100% Now assume that the man of weight is tired and decides to sit on his suitcase. Which statement about the magnitude of the normal force acting on the suitcase is true during the time that the man is sitting on the suitcase? Hint 1. Identify the correct free-body diagram. Which of the figures represents the free-body diagram while the man is sitting atop the suitcase? Here the vector labeled is a force that has the same magnitude as the man’s weight. ANSWER: wm n wm Typesetting math: 100% ANSWER: Correct Recognize that the normal force acting on an object is not always equal to the weight of that object. This is an important point to understand. Problem 6.5 A construction worker with a weight of 880 stands on a roof that is sloped at 18 . Part A What is the magnitude of the normal force of the roof on the worker? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct A B C D The magnitude of the normal force is equal to the magnitude of the suitcase’s weight. The magnitude of the normal force is equal to the magnitude of the suitcase’s weight minus the magnitude of the man’s weight. The magnitude of the normal force is equal to the sum of the magnitude of the man’s weight and the magnitude of the suitcase’s weight. The magnitude of the normal force is less than the magnitude of the suitcase’s weight. N  n = 840 N Typesetting math: 100% Problem 6.6 In each of the two free-body diagrams, the forces are acting on a 3.0 object. Part A For diagram , find the value of , the -component of the acceleration. Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B For diagram the part A, find the value of the -component of the acceleration. Express your answer to two significant figures and include the appropriate units. ANSWER: kg ax x ax = -0.67 m s2 ay, y Typesetting math: 100% Correct Part C For diagram , find the value of , the -component of the acceleration. Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part D For diagram the part C, find the value of , the -component of the acceleration. Express your answer to two significant figures and include the appropriate units. ANSWER: ay = 0 m s2 ax x ax = 0.67 m s2 ay y Typesetting math: 100% Correct Problem 6.7 In each of the two free-body diagrams, the forces are acting on a 3.0 object. Part A Find the value of , the component of the acceleration in diagram (a). Express your answer to two significant figures and include the appropriate units. ANSWER: Correct ay = 0 m s2 kg ax x ax = 0.99 m s2 Typesetting math: 100% Part B Find the value of , the component of the acceleration in diagram (a). Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part C Find the value of , the component of the acceleration in diagram (b). Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part D Find the value of , the component of the acceleration in diagram (b). Express your answer to two significant figures and include the appropriate units. ANSWER: Correct ay y ay = 0 m s2 ax x ax = -0.18 m s2 ay y ay = 0 m s2 Typesetting math: 100% Problem 6.10 A horizontal rope is tied to a 53.0 box on frictionless ice. What is the tension in the rope if: Part A The box is at rest? Express your answer as an integer and include the appropriate units. ANSWER: Correct Part B The box moves at a steady = 4.80 ? Express your answer as an integer and include the appropriate units. ANSWER: Correct Part C The box = 4.80 and = 4.60 ? Express your answer to three significant figures and include the appropriate units. ANSWER: kg T = 0 N vx m/s T = 0 N vx m/s ax m/s2 Typesetting math: 100% Correct Problem 6.14 It takes the elevator in a skyscraper 4.5 to reach its cruising speed of 11 . A 60 passenger gets aboard on the ground floor. Part A What is the passenger’s weight before the elevator starts moving? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B What is the passenger’s weight while the elevator is speeding up? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part C What is the passenger’s weight after the elevator reaches its cruising speed? T = 244 N s m/s kg w = 590 N w = 730 N Typesetting math: 100% Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Block on an Incline A block lies on a plane raised an angle from the horizontal. Three forces act upon the block: , the force of gravity; , the normal force; and , the force of friction. The coefficient of friction is large enough to prevent the block from sliding . Part A Consider coordinate system a, with the x axis along the plane. Which forces lie along the axes? ANSWER: w = 590 N  F  w F n F  f Typesetting math: 100% Correct Part B Which forces lie along the axes of the coordinate system b, in which the y axis is vertical? ANSWER: Correct only only only and and and and and F  f F  n F  w F  f F  n F  f F  w F  n F w F  f F  n F w only only only and and and and and F  f F  n F  w F  f F  n F  f F  w F  n F w F  f F  n F w Typesetting math: 100% Usually the best advice is to choose coordinate system so that the acceleration of the system is directly along one of the coordinate axes. If the system isn’t accelerating, then you are better off choosing the coordinate system with the most vectors along the coordinate axes. But now you are going to ignore that advice. You will find the normal force, , using vertical coordinate system b. In these coordinates you will find the magnitude appearing in both the x and y equations, each multiplied by a trigonometric function. Part C Because the block is not moving, the sum of the y components of the forces acting on the block must be zero. Find an expression for the sum of the y components of the forces acting on the block, using coordinate system b. Express your answer in terms of some or all of the variables , , , and . Hint 1. Find the y component of Write an expression for , the y component of the force , using coordinate system b. Express your answer in terms of and . Hint 1. Some geometry help – a useful angle The smaller angle between and the y-axis is also , as shown in the figure. ANSWER: F  n Fn Fn Ff Fw  F n Fny F  n Fn  F  n  Typesetting math: 100% Hint 2. Find the y component of Write an expression for , the y component of the force , using coordinate system b. Express your answer in terms of and . Hint 1. Some geometry help – a useful angle The smaller angle between and the x-axis is also , as shown in the figure. ANSWER: ANSWER: Fny = Fncos() F f Ffy F f Ff  F  f  Ffy = Ffsin() Fy = 0 = Fncos() + Ffsin() − Fw Typesetting math: 100% Correct Part D Because the block is not moving, the sum of the x components of the forces acting on the block must be zero. Find an expression for the sum of the x components of the forces acting on the block, using coordinate system b. Express your answer in terms of some or all of the variables , , , and . Hint 1. Find the x component of Write an expression for , the x component of the force , using coordinate system b. Express your answer in terms of and . ANSWER: ANSWER: Correct Part E To find the magnitude of the normal force, you must express in terms of since is an unknown. Using the equations you found in the two previous parts, find an expression for involving and but not . Hint 1. How to approach the problem From your answers to the previous two parts you should have two force equations ( and ). Combine these equations to eliminate . The key is to multiply the Fn Ff Fw  F n Fnx F  n Fn  Fnx = −Fnsin() Fx = 0 = −Fnsin() + Ffcos() Fn Fw Ff Fn Fw  Ff Typesetting math: 100% Fy = 0 Fx = 0 Ff equation for the y components by and the equation for the x components by , then add or subtract the two equations to eliminate the term . An alternative motivation for the algebra is to eliminate the trig functions in front of by using the trig identity . At the very least this would result in an equation that is simple to solve for . ANSWER: Correct Congratulations on working this through. Now realize that in coordinate system a, which is aligned with the plane, the y-coordinate equation is , which leads immediately to the result obtained here for . CONCLUSION: A thoughtful examination of which coordinate system to choose can save a lot of algebra. Contact Forces Introduced Learning Goal: To introduce contact forces (normal and friction forces) and to understand that, except for friction forces under certain circumstances, these forces must be determined from: net Force = ma. Two solid objects cannot occupy the same space at the same time. Indeed, when the objects touch, they exert repulsive normal forces on each other, as well as frictional forces that resist their slipping relative to each other. These contact forces arise from a complex interplay between the electrostatic forces between the electrons and ions in the objects and the laws of quantum mechanics. As two surfaces are pushed together these forces increase exponentially over an atomic distance scale, easily becoming strong enough to distort the bulk material in the objects if they approach too close. In everyday experience, contact forces are limited by the deformation or acceleration of the objects, rather than by the fundamental interatomic forces. Hence, we can conclude the following: The magnitude of contact forces is determined by , that is, by the other forces on, and acceleration of, the contacting bodies. The only exception is that the frictional forces cannot exceed (although they can be smaller than this or even zero). Normal and friction forces Two types of contact forces operate in typical mechanics problems, the normal and frictional forces, usually designated by and (or , or something similar) respectively. These are the components of the overall contact force: perpendicular to and parallel to the plane of contact. Kinetic friction when surfaces slide cos  sin  Ff cos() sin() Fn sin2() + cos2 () = 1 Fn Fn = Fwcos() Fy = Fn − FW cos() = 0 Fn F = ma μn n f Ffric n f Typesetting math: 100% When one surface is sliding past the other, experiments show three things about the friction force (denoted ): The frictional force opposes the relative motion at the 1. point of contact, 2. is proportional to the normal force, and 3. the ratio of the magnitude of the frictional force to that of the normal force is fairly constant over a wide range of speeds. The constant of proportionality is called the coefficient of kinetic friction, often designated . As long as the sliding continues, the frictional force is then (valid when the surfaces slide by each other). Static friction when surfaces don’t slide When there is no relative motion of the surfaces, the frictional force can assume any value from zero up to a maximum , where is the coefficient of static friction. Invariably, is larger than , in agreement with the observation that when a force is large enough that something breaks loose and starts to slide, it often accelerates. The frictional force for surfaces with no relative motion is therefore (valid when the contacting surfaces have no relative motion). The actual magnitude and direction of the static friction force are such that it (together with other forces on the object) causes the object to remain motionless with respect to the contacting surface as long as the static friction force required does not exceed . The equation is valid only when the surfaces are on the verge of sliding. Part A When two objects slide by one another, which of the following statements about the force of friction between them, is true? ANSWER: Correct Part B fk fk μk fk = μkn μsn μs μs μk fs ! μsn μsn fs = μsn The frictional force is always equal to . The frictional force is always less than . The frictional force is determined by other forces on the objects so it can be either equal to or less than . μkn μkn μkn Typesetting math: 100% When two objects are in contact with no relative motion, which of the following statements about the frictional force between them, is true? ANSWER: Correct For static friction, the actual magnitude and direction of the friction force are such that it, together with any other forces present, will cause the object to have the observed acceleration. The magnitude of the force cannot exceed . If the magnitude of static friction needed to keep acceleration equal to zero exceeds , then the object will slide subject to the resistance of kinetic friction. Do not automatically assume that unless you are considering a situation in which the magnitude of the static friction force is as large as possible (i.e., when determining at what point an object will just begin to slip). Whether the actual magnitude of the friction force is 0, less than , or equal to depends on the magnitude of the other forces (if any) as well as the acceleration of the object through . Part C When a board with a box on it is slowly tilted to larger and larger angle, common experience shows that the box will at some point “break loose” and start to accelerate down the board. The box begins to slide once the component of gravity acting parallel to the board just begins to exceeds the maximum force of static friction. Which of the following is the most general explanation for why the box accelerates down the board? ANSWER: The frictional force is always equal to . The frictional force is always less than . The frictional force is determined by other forces on the objects so it can be either equal to or less than . μsn μsn μsn μsn μsn fs = μsn μsn μsn F = ma Fg The force of kinetic friction is smaller than that of maximum static friction, but remains the same. Once the box is moving, is smaller than the force of maximum static friction but larger than the force of kinetic friction. Once the box is moving, is larger than the force of maximum static friction. When the box is stationary, equals the force of static friction, but once the box starts moving, the sliding reduces the normal force, which in turn reduces the friction. Fg Fg Fg Fg Typesetting math: 100% Correct At the point when the box finally does “break loose,” you know that the component of the box’s weight that is parallel to the board just exceeds (i.e., this component of gravitational force on the box has just reached a magnitude such that the force of static friction, which has a maximum value of , can no longer oppose it.) For the box to then accelerate, there must be a net force on the box along the board. Thus, the component of the box’s weight parallel to the board must be greater than the force of kinetic friction. Therefore the force of kinetic friction must be less than the force of static friction which implies , as expected. Part D Consider a problem in which a car of mass is on a road tilted at an angle . The normal force Select the best answer. ANSWER: Correct The key point is that contact forces must be determined from Newton’s equation. In the problem described above, there is not enough information given to determine the normal force (e.g., the acceleration is unknown). Each of the answer options is valid under some conditions ( , the car is sliding down an icy incline, or the car is going around a banked turn), but in fact none is likely to be correct if there are other forces on the car or if the car is accelerating. Do not memorize values for the normal force valid in different problems–you must determine from . Problem 6.17 Bonnie and Clyde are sliding a 323 bank safe across the floor to their getaway car. The safe slides with a constant speed if Clyde pushes from behind with 375 of force while Bonnie pulls forward on a rope with 335 of force. μsn μsn μkn μsn μk < μs M  is found using n = Mg n = Mg cos() n = Mg cos() F  = Ma  = 0 n F = ma kg N N Typesetting math: 100% Part A What is the safe's coefficient of kinetic friction on the bank floor? ANSWER: Correct Problem 6.19 A crate is placed on a horizontal conveyor belt. The materials are such that and . Part A Draw a free-body diagram showing all the forces on the crate if the conveyer belt runs at constant speed. Draw the force vectors with their tails at the dot. The orientation of your vectors will be graded. The exact length of your vectors will not be graded but the relative length of one to the other will be graded. ANSWER: 0.224 10 kg μs = 0.5 μk = 0.3 Typesetting math: 100% Correct Part B Draw a free-body diagram showing all the forces on the crate if the conveyer belt is speeding up. Draw the force vectors with their tails at the dot. The orientation of your vectors will be graded. The exact length of your vectors will not be graded but the relative length of one to the other will be graded. ANSWER: Typesetting math: 100% Correct Part C What is the maximum acceleration the belt can have without the crate slipping? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct amax = 4.9 m s2 Typesetting math: 100% Problem 6.28 A 1100 steel beam is supported by two ropes. Part A What is the tension in rope 1? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B What is the tension in rope 2? Express your answer to two significant figures and include the appropriate units. ANSWER: kg T1 = 7000 N Typesetting math: 100% Correct Problem 6.35 The position of a 1.4 mass is given by , where is in seconds. Part A What is the net horizontal force on the mass at ? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B What is the net horizontal force on the mass at ? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Problem 6.39 T2 = 4800 N kg x = (2t3 − 3t2 )m t t = 0 s F = -8.4 N t = 1 s F = 8.4 N Typesetting math: 100% A rifle with a barrel length of 61 fires a 8 bullet with a horizontal speed of 400 . The bullet strikes a block of wood and penetrates to a depth of 11 . Part A What resistive force (assumed to be constant) does the wood exert on the bullet? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B How long does it take the bullet to come to rest after entering the wood? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Problem 6.45 You and your friend Peter are putting new shingles on a roof pitched at 21 . You're sitting on the very top of the roof when Peter, who is at the edge of the roof directly below you, 5.0 away, asks you for the box of nails. Rather than carry the 2.0 box of nails down to Peter, you decide to give the box a push and have it slide down to him. Part A If the coefficient of kinetic friction between the box and the roof is 0.55, with what speed should you push the box to have it gently come to rest right at the edge of the roof? Express your answer to two significant figures and include the appropriate units. cm g m/s cm fk = 5800 N = 5.5×10−4 t s  m kg Typesetting math: 100% ANSWER: Correct Problem 6.54 The 2.0 wood box in the figure slides down a vertical wood wall while you push on it at a 45 angle. Part A What magnitude of force should you apply to cause the box to slide down at a constant speed? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct v = 3.9 ms kg  F = 23 N Typesetting math: 100% Score Summary: Your score on this assignment is 98.8%. You received 114.57 out of a possible total of 116 points. Typesetting math: 100%

Assignment 5 Due: 11:59pm on Wednesday, March 5, 2014 You will receive no credit for items you complete after the assignment is due. Grading Policy Conceptual Question 6.13 A hand presses down on the book in the figure. Part A Is the normal force of the table on the book larger than, smaller than, or equal to ? ANSWER: Correct mg Equal to Larger than Smaller than mg mg mg Problem 6.2 The three ropes in the figure are tied to a small, very light ring. Two of these ropes are anchored to walls at right angles with the tensions shown in the figure. Part A What is the magnitude of the tension in the third rope? Express your answer using two significant figures. ANSWER: Correct Part B What is the direction of the tension in the third rope? Express your answer using two significant figures. T  3 T3 = 94 N T  3 Typesetting math: 100% ANSWER: Correct The Normal Force When an object rests on a surface, there is always a force perpendicular to the surface; we call this the normal force, denoted by . The two questions to the right will explore the normal force. Part A A man attempts to pick up his suitcase of weight by pulling straight up on the handle. However, he is unable to lift the suitcase from the floor. Which statement about the magnitude of the normal force acting on the suitcase is true during the time that the man pulls upward on the suitcase? Hint 1. How to approach this problem First, identify the forces that act on the suitcase and draw a free-body diagram. Then use the fact that the suitcase is in equilibrium, , to examine how the forces acting on the suitcase relate to each other. Hint 2. Identify the correct free-body diagram Which of the figures represents the free-body diagram of the suitcase while the man is pulling on the handle with a force of magnitude ? = 58   below horizontal n ws n F = 0 fpull Typesetting math: 100% ANSWER: ANSWER: Correct Part B A B C D The magnitude of the normal force is equal to the magnitude of the weight of the suitcase. The magnitude of the normal force is equal to the magnitude of the weight of the suitcase minus the magnitude of the force of the pull. The magnitude of the normal force is equal to the sum of the magnitude of the force of the pull and the magnitude of the suitcase’s weight. The magnitude of the normal force is greater than the magnitude of the weight of the suitcase. Typesetting math: 100% Now assume that the man of weight is tired and decides to sit on his suitcase. Which statement about the magnitude of the normal force acting on the suitcase is true during the time that the man is sitting on the suitcase? Hint 1. Identify the correct free-body diagram. Which of the figures represents the free-body diagram while the man is sitting atop the suitcase? Here the vector labeled is a force that has the same magnitude as the man’s weight. ANSWER: wm n wm Typesetting math: 100% ANSWER: Correct Recognize that the normal force acting on an object is not always equal to the weight of that object. This is an important point to understand. Problem 6.5 A construction worker with a weight of 880 stands on a roof that is sloped at 18 . Part A What is the magnitude of the normal force of the roof on the worker? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct A B C D The magnitude of the normal force is equal to the magnitude of the suitcase’s weight. The magnitude of the normal force is equal to the magnitude of the suitcase’s weight minus the magnitude of the man’s weight. The magnitude of the normal force is equal to the sum of the magnitude of the man’s weight and the magnitude of the suitcase’s weight. The magnitude of the normal force is less than the magnitude of the suitcase’s weight. N  n = 840 N Typesetting math: 100% Problem 6.6 In each of the two free-body diagrams, the forces are acting on a 3.0 object. Part A For diagram , find the value of , the -component of the acceleration. Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B For diagram the part A, find the value of the -component of the acceleration. Express your answer to two significant figures and include the appropriate units. ANSWER: kg ax x ax = -0.67 m s2 ay, y Typesetting math: 100% Correct Part C For diagram , find the value of , the -component of the acceleration. Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part D For diagram the part C, find the value of , the -component of the acceleration. Express your answer to two significant figures and include the appropriate units. ANSWER: ay = 0 m s2 ax x ax = 0.67 m s2 ay y Typesetting math: 100% Correct Problem 6.7 In each of the two free-body diagrams, the forces are acting on a 3.0 object. Part A Find the value of , the component of the acceleration in diagram (a). Express your answer to two significant figures and include the appropriate units. ANSWER: Correct ay = 0 m s2 kg ax x ax = 0.99 m s2 Typesetting math: 100% Part B Find the value of , the component of the acceleration in diagram (a). Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part C Find the value of , the component of the acceleration in diagram (b). Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part D Find the value of , the component of the acceleration in diagram (b). Express your answer to two significant figures and include the appropriate units. ANSWER: Correct ay y ay = 0 m s2 ax x ax = -0.18 m s2 ay y ay = 0 m s2 Typesetting math: 100% Problem 6.10 A horizontal rope is tied to a 53.0 box on frictionless ice. What is the tension in the rope if: Part A The box is at rest? Express your answer as an integer and include the appropriate units. ANSWER: Correct Part B The box moves at a steady = 4.80 ? Express your answer as an integer and include the appropriate units. ANSWER: Correct Part C The box = 4.80 and = 4.60 ? Express your answer to three significant figures and include the appropriate units. ANSWER: kg T = 0 N vx m/s T = 0 N vx m/s ax m/s2 Typesetting math: 100% Correct Problem 6.14 It takes the elevator in a skyscraper 4.5 to reach its cruising speed of 11 . A 60 passenger gets aboard on the ground floor. Part A What is the passenger’s weight before the elevator starts moving? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B What is the passenger’s weight while the elevator is speeding up? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part C What is the passenger’s weight after the elevator reaches its cruising speed? T = 244 N s m/s kg w = 590 N w = 730 N Typesetting math: 100% Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Block on an Incline A block lies on a plane raised an angle from the horizontal. Three forces act upon the block: , the force of gravity; , the normal force; and , the force of friction. The coefficient of friction is large enough to prevent the block from sliding . Part A Consider coordinate system a, with the x axis along the plane. Which forces lie along the axes? ANSWER: w = 590 N  F  w F n F  f Typesetting math: 100% Correct Part B Which forces lie along the axes of the coordinate system b, in which the y axis is vertical? ANSWER: Correct only only only and and and and and F  f F  n F  w F  f F  n F  f F  w F  n F w F  f F  n F w only only only and and and and and F  f F  n F  w F  f F  n F  f F  w F  n F w F  f F  n F w Typesetting math: 100% Usually the best advice is to choose coordinate system so that the acceleration of the system is directly along one of the coordinate axes. If the system isn’t accelerating, then you are better off choosing the coordinate system with the most vectors along the coordinate axes. But now you are going to ignore that advice. You will find the normal force, , using vertical coordinate system b. In these coordinates you will find the magnitude appearing in both the x and y equations, each multiplied by a trigonometric function. Part C Because the block is not moving, the sum of the y components of the forces acting on the block must be zero. Find an expression for the sum of the y components of the forces acting on the block, using coordinate system b. Express your answer in terms of some or all of the variables , , , and . Hint 1. Find the y component of Write an expression for , the y component of the force , using coordinate system b. Express your answer in terms of and . Hint 1. Some geometry help – a useful angle The smaller angle between and the y-axis is also , as shown in the figure. ANSWER: F  n Fn Fn Ff Fw  F n Fny F  n Fn  F  n  Typesetting math: 100% Hint 2. Find the y component of Write an expression for , the y component of the force , using coordinate system b. Express your answer in terms of and . Hint 1. Some geometry help – a useful angle The smaller angle between and the x-axis is also , as shown in the figure. ANSWER: ANSWER: Fny = Fncos() F f Ffy F f Ff  F  f  Ffy = Ffsin() Fy = 0 = Fncos() + Ffsin() − Fw Typesetting math: 100% Correct Part D Because the block is not moving, the sum of the x components of the forces acting on the block must be zero. Find an expression for the sum of the x components of the forces acting on the block, using coordinate system b. Express your answer in terms of some or all of the variables , , , and . Hint 1. Find the x component of Write an expression for , the x component of the force , using coordinate system b. Express your answer in terms of and . ANSWER: ANSWER: Correct Part E To find the magnitude of the normal force, you must express in terms of since is an unknown. Using the equations you found in the two previous parts, find an expression for involving and but not . Hint 1. How to approach the problem From your answers to the previous two parts you should have two force equations ( and ). Combine these equations to eliminate . The key is to multiply the Fn Ff Fw  F n Fnx F  n Fn  Fnx = −Fnsin() Fx = 0 = −Fnsin() + Ffcos() Fn Fw Ff Fn Fw  Ff Typesetting math: 100% Fy = 0 Fx = 0 Ff equation for the y components by and the equation for the x components by , then add or subtract the two equations to eliminate the term . An alternative motivation for the algebra is to eliminate the trig functions in front of by using the trig identity . At the very least this would result in an equation that is simple to solve for . ANSWER: Correct Congratulations on working this through. Now realize that in coordinate system a, which is aligned with the plane, the y-coordinate equation is , which leads immediately to the result obtained here for . CONCLUSION: A thoughtful examination of which coordinate system to choose can save a lot of algebra. Contact Forces Introduced Learning Goal: To introduce contact forces (normal and friction forces) and to understand that, except for friction forces under certain circumstances, these forces must be determined from: net Force = ma. Two solid objects cannot occupy the same space at the same time. Indeed, when the objects touch, they exert repulsive normal forces on each other, as well as frictional forces that resist their slipping relative to each other. These contact forces arise from a complex interplay between the electrostatic forces between the electrons and ions in the objects and the laws of quantum mechanics. As two surfaces are pushed together these forces increase exponentially over an atomic distance scale, easily becoming strong enough to distort the bulk material in the objects if they approach too close. In everyday experience, contact forces are limited by the deformation or acceleration of the objects, rather than by the fundamental interatomic forces. Hence, we can conclude the following: The magnitude of contact forces is determined by , that is, by the other forces on, and acceleration of, the contacting bodies. The only exception is that the frictional forces cannot exceed (although they can be smaller than this or even zero). Normal and friction forces Two types of contact forces operate in typical mechanics problems, the normal and frictional forces, usually designated by and (or , or something similar) respectively. These are the components of the overall contact force: perpendicular to and parallel to the plane of contact. Kinetic friction when surfaces slide cos  sin  Ff cos() sin() Fn sin2() + cos2 () = 1 Fn Fn = Fwcos() Fy = Fn − FW cos() = 0 Fn F = ma μn n f Ffric n f Typesetting math: 100% When one surface is sliding past the other, experiments show three things about the friction force (denoted ): The frictional force opposes the relative motion at the 1. point of contact, 2. is proportional to the normal force, and 3. the ratio of the magnitude of the frictional force to that of the normal force is fairly constant over a wide range of speeds. The constant of proportionality is called the coefficient of kinetic friction, often designated . As long as the sliding continues, the frictional force is then (valid when the surfaces slide by each other). Static friction when surfaces don’t slide When there is no relative motion of the surfaces, the frictional force can assume any value from zero up to a maximum , where is the coefficient of static friction. Invariably, is larger than , in agreement with the observation that when a force is large enough that something breaks loose and starts to slide, it often accelerates. The frictional force for surfaces with no relative motion is therefore (valid when the contacting surfaces have no relative motion). The actual magnitude and direction of the static friction force are such that it (together with other forces on the object) causes the object to remain motionless with respect to the contacting surface as long as the static friction force required does not exceed . The equation is valid only when the surfaces are on the verge of sliding. Part A When two objects slide by one another, which of the following statements about the force of friction between them, is true? ANSWER: Correct Part B fk fk μk fk = μkn μsn μs μs μk fs ! μsn μsn fs = μsn The frictional force is always equal to . The frictional force is always less than . The frictional force is determined by other forces on the objects so it can be either equal to or less than . μkn μkn μkn Typesetting math: 100% When two objects are in contact with no relative motion, which of the following statements about the frictional force between them, is true? ANSWER: Correct For static friction, the actual magnitude and direction of the friction force are such that it, together with any other forces present, will cause the object to have the observed acceleration. The magnitude of the force cannot exceed . If the magnitude of static friction needed to keep acceleration equal to zero exceeds , then the object will slide subject to the resistance of kinetic friction. Do not automatically assume that unless you are considering a situation in which the magnitude of the static friction force is as large as possible (i.e., when determining at what point an object will just begin to slip). Whether the actual magnitude of the friction force is 0, less than , or equal to depends on the magnitude of the other forces (if any) as well as the acceleration of the object through . Part C When a board with a box on it is slowly tilted to larger and larger angle, common experience shows that the box will at some point “break loose” and start to accelerate down the board. The box begins to slide once the component of gravity acting parallel to the board just begins to exceeds the maximum force of static friction. Which of the following is the most general explanation for why the box accelerates down the board? ANSWER: The frictional force is always equal to . The frictional force is always less than . The frictional force is determined by other forces on the objects so it can be either equal to or less than . μsn μsn μsn μsn μsn fs = μsn μsn μsn F = ma Fg The force of kinetic friction is smaller than that of maximum static friction, but remains the same. Once the box is moving, is smaller than the force of maximum static friction but larger than the force of kinetic friction. Once the box is moving, is larger than the force of maximum static friction. When the box is stationary, equals the force of static friction, but once the box starts moving, the sliding reduces the normal force, which in turn reduces the friction. Fg Fg Fg Fg Typesetting math: 100% Correct At the point when the box finally does “break loose,” you know that the component of the box’s weight that is parallel to the board just exceeds (i.e., this component of gravitational force on the box has just reached a magnitude such that the force of static friction, which has a maximum value of , can no longer oppose it.) For the box to then accelerate, there must be a net force on the box along the board. Thus, the component of the box’s weight parallel to the board must be greater than the force of kinetic friction. Therefore the force of kinetic friction must be less than the force of static friction which implies , as expected. Part D Consider a problem in which a car of mass is on a road tilted at an angle . The normal force Select the best answer. ANSWER: Correct The key point is that contact forces must be determined from Newton’s equation. In the problem described above, there is not enough information given to determine the normal force (e.g., the acceleration is unknown). Each of the answer options is valid under some conditions ( , the car is sliding down an icy incline, or the car is going around a banked turn), but in fact none is likely to be correct if there are other forces on the car or if the car is accelerating. Do not memorize values for the normal force valid in different problems–you must determine from . Problem 6.17 Bonnie and Clyde are sliding a 323 bank safe across the floor to their getaway car. The safe slides with a constant speed if Clyde pushes from behind with 375 of force while Bonnie pulls forward on a rope with 335 of force. μsn μsn μkn μsn μk < μs M  is found using n = Mg n = Mg cos() n = Mg cos() F  = Ma  = 0 n F = ma kg N N Typesetting math: 100% Part A What is the safe's coefficient of kinetic friction on the bank floor? ANSWER: Correct Problem 6.19 A crate is placed on a horizontal conveyor belt. The materials are such that and . Part A Draw a free-body diagram showing all the forces on the crate if the conveyer belt runs at constant speed. Draw the force vectors with their tails at the dot. The orientation of your vectors will be graded. The exact length of your vectors will not be graded but the relative length of one to the other will be graded. ANSWER: 0.224 10 kg μs = 0.5 μk = 0.3 Typesetting math: 100% Correct Part B Draw a free-body diagram showing all the forces on the crate if the conveyer belt is speeding up. Draw the force vectors with their tails at the dot. The orientation of your vectors will be graded. The exact length of your vectors will not be graded but the relative length of one to the other will be graded. ANSWER: Typesetting math: 100% Correct Part C What is the maximum acceleration the belt can have without the crate slipping? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct amax = 4.9 m s2 Typesetting math: 100% Problem 6.28 A 1100 steel beam is supported by two ropes. Part A What is the tension in rope 1? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B What is the tension in rope 2? Express your answer to two significant figures and include the appropriate units. ANSWER: kg T1 = 7000 N Typesetting math: 100% Correct Problem 6.35 The position of a 1.4 mass is given by , where is in seconds. Part A What is the net horizontal force on the mass at ? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B What is the net horizontal force on the mass at ? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Problem 6.39 T2 = 4800 N kg x = (2t3 − 3t2 )m t t = 0 s F = -8.4 N t = 1 s F = 8.4 N Typesetting math: 100% A rifle with a barrel length of 61 fires a 8 bullet with a horizontal speed of 400 . The bullet strikes a block of wood and penetrates to a depth of 11 . Part A What resistive force (assumed to be constant) does the wood exert on the bullet? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Part B How long does it take the bullet to come to rest after entering the wood? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct Problem 6.45 You and your friend Peter are putting new shingles on a roof pitched at 21 . You're sitting on the very top of the roof when Peter, who is at the edge of the roof directly below you, 5.0 away, asks you for the box of nails. Rather than carry the 2.0 box of nails down to Peter, you decide to give the box a push and have it slide down to him. Part A If the coefficient of kinetic friction between the box and the roof is 0.55, with what speed should you push the box to have it gently come to rest right at the edge of the roof? Express your answer to two significant figures and include the appropriate units. cm g m/s cm fk = 5800 N = 5.5×10−4 t s  m kg Typesetting math: 100% ANSWER: Correct Problem 6.54 The 2.0 wood box in the figure slides down a vertical wood wall while you push on it at a 45 angle. Part A What magnitude of force should you apply to cause the box to slide down at a constant speed? Express your answer to two significant figures and include the appropriate units. ANSWER: Correct v = 3.9 ms kg  F = 23 N Typesetting math: 100% Score Summary: Your score on this assignment is 98.8%. You received 114.57 out of a possible total of 116 points. Typesetting math: 100%

Assignment 5 Due: 11:59pm on Wednesday, March 5, 2014 You … Read More...
Que 1: true of false a) Both silicon and germanium atoms have four valances electrons b) When forward-biased , a diode has a very high resistance c) A zener diode is designed to operate in the forward-bias region and has higher reverse breakdown voltage level than regular diode Write the word or phrase that best completes each statement or answers the questions: d) In semiconductor, in addition to the electron flow, there is also another kind of charge flow referred as………………. e) A silicon diode in placed in series with 2kΩresistor and a 14 V dc power supply. The current ID is: i) 6.65 mA ii) 2.2 mA iii)7.5 mA iv) 14 mA f) The series resistor that limits the forward current length through a silicon diode to 8 mA if the power supply voltage is 9.5V is : i) 1.1 kΩ ii) 2.2 kΩ iii) 9.5 mA iv) 4.7 mA FIGURE g) Determine the diode current IZ for the circuit of figure 1-2: assume VZ = 3.9 V i) 8.1 mA ii) 3.55 mA iii) 24.5 mA iv) 13.64 mA h) Determine the current through a 20 mA yellow LED when the power supply voltage is 15 V the series resistor is 2k ohm and the diode is put in backward. Assume VLED = 2V i) 20 mA ii) 0 mA iii) 10 mA iv) 6.5 mA Write the word or phrase that best completes each statement or answers the questions: i) Zener diode is a p-n junction diode that is desgined for specifc…………………voltage j) ………………………….is the process by which impurity atoms are introduced to the instrisic semiconductor in order to alter the balance between holes and electrons. 1) The average value of s full-wave rectifier with a peak vaue of 17V ia 108V 2) If the frequency of input signal of the full wave reflector is 60Hz, the output frequency is 120Hz 3) The cathode of a zener diode, when conducting is:y i) at 0.7V ii) more positive than anode iii) more negative than anode iv) -0.7V 4) A given transformer with turn ratio 12:1has an input of 115V at 60Hzthe paek output voltage v0 (p) is i) 9.58 V ii) 6.78V iii) 11.5 V iv) 13.55 V FIGURE 2-1 5) The output voltage of V0(DC)for the full wave rectifier of figure 2-1 is i) 18.07 V ii) 12.78 V iii) 8.3 V iv) 5.74 V FIGURE 2-2 6) The voltage V2(P) for the full-wavr bridge rectifier of figure 2-2 is i) 17.37 V ii)1 6.67 V iii) 12.78 V iv) 18.07 V 7) Assume the current I0(DC) in figure is 100mA and C= 2400µF .the ripple voltage vr (p-p) i) 694mV ii) 424 mV iii) 121 V iv) 347 V Use figure 2-3 for questions below: Assume that RS = 75, RL = 160 FIGURE 2-3 8) The output voltage V0 is i) 7.5 V ii) 10 V iii) 8.5 V iv) 12 V Write the word or phrase that best completes each statement or answers the questions: 9) The magnitude of the peak-to-peak ripple voltage vr (p-p) is directly proportional to the output …………………. 10) The ripple voltage at the filter section vr (p-p) can be reduced by increasing the value

Que 1: true of false a) Both silicon and germanium atoms have four valances electrons b) When forward-biased , a diode has a very high resistance c) A zener diode is designed to operate in the forward-bias region and has higher reverse breakdown voltage level than regular diode Write the word or phrase that best completes each statement or answers the questions: d) In semiconductor, in addition to the electron flow, there is also another kind of charge flow referred as………………. e) A silicon diode in placed in series with 2kΩresistor and a 14 V dc power supply. The current ID is: i) 6.65 mA ii) 2.2 mA iii)7.5 mA iv) 14 mA f) The series resistor that limits the forward current length through a silicon diode to 8 mA if the power supply voltage is 9.5V is : i) 1.1 kΩ ii) 2.2 kΩ iii) 9.5 mA iv) 4.7 mA FIGURE g) Determine the diode current IZ for the circuit of figure 1-2: assume VZ = 3.9 V i) 8.1 mA ii) 3.55 mA iii) 24.5 mA iv) 13.64 mA h) Determine the current through a 20 mA yellow LED when the power supply voltage is 15 V the series resistor is 2k ohm and the diode is put in backward. Assume VLED = 2V i) 20 mA ii) 0 mA iii) 10 mA iv) 6.5 mA Write the word or phrase that best completes each statement or answers the questions: i) Zener diode is a p-n junction diode that is desgined for specifc…………………voltage j) ………………………….is the process by which impurity atoms are introduced to the instrisic semiconductor in order to alter the balance between holes and electrons. 1) The average value of s full-wave rectifier with a peak vaue of 17V ia 108V 2) If the frequency of input signal of the full wave reflector is 60Hz, the output frequency is 120Hz 3) The cathode of a zener diode, when conducting is:y i) at 0.7V ii) more positive than anode iii) more negative than anode iv) -0.7V 4) A given transformer with turn ratio 12:1has an input of 115V at 60Hzthe paek output voltage v0 (p) is i) 9.58 V ii) 6.78V iii) 11.5 V iv) 13.55 V FIGURE 2-1 5) The output voltage of V0(DC)for the full wave rectifier of figure 2-1 is i) 18.07 V ii) 12.78 V iii) 8.3 V iv) 5.74 V FIGURE 2-2 6) The voltage V2(P) for the full-wavr bridge rectifier of figure 2-2 is i) 17.37 V ii)1 6.67 V iii) 12.78 V iv) 18.07 V 7) Assume the current I0(DC) in figure is 100mA and C= 2400µF .the ripple voltage vr (p-p) i) 694mV ii) 424 mV iii) 121 V iv) 347 V Use figure 2-3 for questions below: Assume that RS = 75, RL = 160 FIGURE 2-3 8) The output voltage V0 is i) 7.5 V ii) 10 V iii) 8.5 V iv) 12 V Write the word or phrase that best completes each statement or answers the questions: 9) The magnitude of the peak-to-peak ripple voltage vr (p-p) is directly proportional to the output …………………. 10) The ripple voltage at the filter section vr (p-p) can be reduced by increasing the value